In the market of the Latvia different wood surface coating materials suitable for use in outdoor conditions are offered, but available information on the efficiency of these against direct water exposure is insufficient. For structural timber building elements, such as glued laminated timber (GLT), the surface coating should be applied taking into account technological, visual or colour changes (ISO 7724:1984) and – last, but not least – economic aspects are considered. Wood surfaces coated with coating materials, such as varnishes, paints, etc. can stabilize some properties such as movement of moisture content, dimensional changes and attack by microorganisms and fungi. The changes in the moisture content of timber may influence such important parameters as mechanical properties and the total life time of the structural timber elements. A study has been conducted with the aim of assessing the efficiency of coating materials used for wood protection against water absorption. In this study, six different commercial coating products used for the treatment of spruce (Picea Abies L. Karst.) and pine (Pinus Sylvestris L.) samples were tested. The efficiency of different coating substances was assessed using two modified test methods according to the standards EN 382-2 (1994) and EN 927-5 (2006), determining the surface water absorption after immersion in water for 24 h and the dynamics of water absorption of the glued laminated timber for 696 h kept in water. As a result of the study, it has been ascertained that organic solvent-based commercial coating products are more efficient against short-term and long-term wood water absorption compared to oil-based coating materials.

Birch plywood has a wide range of applications for interior and exterior use. The demand for plywood with improved fire protection properties and good visual appearance is increasing year by year. The impregnation at high pressure of the whole plywood panels is one of the options to achieve it. The aim of this study was to develop good visual looking birch plywood product for interior design purposes as well evaluate different influencing factors to reaction to fire properties of fire-retardant treated birch plywood. This study consists of three parts. At the first stage, high pressure industrially impregnated plywood properties were studied by two influencing factors – distribution of fire retardant in plywood panel plane and sanding process influence on reaction to fire performance of product. At the second stage, seven different industrial finishing systems were selected for covering high-pressure impregnated birch plywood and their effect on fire reaction performance was studied. In addition, two surface coating systems were studied on standard birch plywood substrate. At the third stage, intumescent coating consumption effect on reaction to fire performance was studied. The reaction to fire performance of birch plywood was evaluated by performing a flammability test using the Single Burning Item test according to EN 13823:2010. It was found that high pressure impregnation of plywood cannot ensure even saturation of fire retardant throughout the sheet, which significantly affects the fire performance of product. The impact of different finishing materials to reaction to fire performance has been described by the results of this research.

The aim of the current study was to determine the monthly total soluble sugar concentration in the stem and root of the Wichita and Western walnut (Carya illinoinensis) varieties during a productive cycle in northern Mexico. Vegetable samples were obtained using a systematic sampling method, and processed by means of a spectrophotometric assay to determine the total soluble sugars (TSS) concentration in productive walnut trees. Data analysis was performed by means of a 2-way ANOVA. The results of the TSS concentration had differences throughout the months of an annual productive cycle, and were also different between the evaluated walnut varieties. The highest total soluble sugar concentration in stem and root were in the lowest temperature months, and it decreases in both tissues when the environmental temperature rises. The Wichita variety had a higher total soluble sugar concentration than the Western in every month during the productive cycle. Further research is required to assess the effect of other type of factors including environmental or agronomic over the dynamics of the total soluble sugars in productive walnut trees.

Q fever is a widespread disease affecting reproduction in dairy cattle. Several risk factors can increase the possibility of the herd becoming infected and the persistence of infection. The aim of this study was to characterise the dynamics of C. burnetii infection in affected herds and to evaluate reproduction problems and risk factors using a questionnaire within infected and infection-free dairy herds. In total, 25 farms that were serologically positive or shedding C. burnetii DNA in milk and 14 C. burnetii infection-free farms in Latvia answered the questionnaire. Ten positive herds were studied by testing individual blood and milk samples from up to 10 animals at two times separated by 7.5 to 13 months. The number of serologically positive and suspicious animals was higher in the second sampling even though several animals were culled. In the positive herds, the percentage of dystocia, stillborn calves and abortions during the last year was significantly (p=0.001; 0.01; 0.005, respectively) higher than in the negative herds. Several significant factors were found for the presence of Q fever infection, such as the herd size, the regional population density of ruminants, artificial ventilation systems, and frequent farm visitors. Deratisation was less practised in the negative farms and the presence of ticks was observed more often in the negative farms. Only two identified risk factors can be mitigated – the ventilation system and frequent farm visitors. The other factors cannot be changed arbitrarily but they have to be taken into account by decision makers.