The goal of this research is to explore sentence structures expressed by parts of speech. Due to a small amount of data, a problem of sparse data has arisen, which was solved by recording the annotated sentences and considering a “framework” of a sentence made up from a verb and a noun, which was conditionally called a code. The code of a sentence is created by changing each word of a sentence by a symbol (letter or number) that encodes one or other property of that word as a constituent of the sentence. Zipf’s law describes sentences, encoded like that, rather well. If we ‘learn’ well to identify and analyze (annotate, translate, etc.) sentences of the simplest structure, we can automatically process quite a large part of text sentences. It is possible to identify at least 17% of sentences consisting of the simplest structure.

Wood-based ash landfilling is increasing issue not only in Latvia but in the whole world as more biomass is used for energy production. Utilization of wood burning waste as fertilizer is already used worldwide, but there is lack of information about chemical composition of wood ash obtained from Latvia plants, so the aim of this study was to determine chemical composition and analyse possible utilization options of wood-based ash from Latvia plants. Therefore wood ash samples from 53 companies were collected, sieved and chemical composition of samples was determined. It was concluded that within higher capacity of furnace more coarse fraction of wood ash was observed which is less valuable as fertilizer. Wood ash is good liming material consisting alkali compounds and other biogenic elements but also heavy metals, which are pollutants and could cause environmental problems.

The main aim of this paper is to fuzzify the kinetic parameters, which have crisp nature, in order to obtain the realistic and accurate results. In the present study, the variance, upper limit of ‘dE’ and the frequency factor are assumed to be fuzzy numbers. The Gaussian distribution is considered as the distribution function, f (E), of Distributed Activation Energy Model (DAEM). The membership and the non-membership functions are evaluated by the trapezoidal fuzzy number. Thermo-analytical data has been found experimentally with the help of TGA/DTG analysis. The approximated solution of DAEM is obtained with the help of asymptotic expansion.

The aim of the study was to evaluate cocoa beans quality produced in Cameroon, Ecuador, Nigeria and Ghana from safety position determining heavy and trace metals concentration and evaluating the oxidative stability of confectionery products prototypes (trials) with analysing cocoa beans. For evaluation of oxidative stability of confectionery products, the main ingredients - butter and cocoa beans kernels were tested making trials as milk chocolate prototype. The composition of confectionery ingredients affects quality of products; therefore it is very important to evaluate quality of raw materials in confectionery industry, as they are purchased practically in all regions of the world. Mercury, arsenic, lead, cadmium concentration was determined in whole cocoa beans as their presence in foods have toxic effect on human beings and their concentration are strictly limited as maximum residue limits for processing. Cocoa shells can be used as additive to confectionery products recipes therefore the object of the study was cocoa beans and cocoa shells. Analyzing cocoa beans quality indices there was established that lead, cadmium, aluminium and zinc concentrations vary in cocoa beans significantly. Differences in lead concentration in cocoa beans from Ghana, Cameroon and Ecuador were significant (p < 0.05) compared with concentration of lead in cocoa beans from Nigeria (p > 0.05). Cadmium concentration in cocoa beans from Cameroon was significantly different comparing with cocoa beans from Nigeria, Ecuador and Ghana (p > 0.05). Differences in aluminium concentration in cocoa beans kernels were significant (p < 0.05) in all analyzed samples. Concentration of zinc was higher in shells of cocoa beans, especially in shells of cocoa beans from Ecuador (p < 0.05). The presence of cocoa products in milk chocolate prototypes inhibited the speed of lipid peroxidation. The different trace and heavy metals concentrations in cocoa beans should be taken into account choosing ingredients and components for confectionary products production particularly those with high content of cocoa (chocolates, sweets, cocoa fillings, cocoa creams and others) with the aim to prevent oxidation process during shelf-life of products.

Gluing of wood with great moisture content has challenge of water interaction with glue to give unwanted changes in glue properties and formed bond-line. Rheological measurements of polyurethane glues are sufficiently effective method to understand the polymer curing process and viscoelastic properties. Gel formation point is important parameter for a glue from the point of its application. When glue reaches the gel formation point, its viscosity drastically increases so that it could not properly wet the wood and it can result in poor bonds. One-component moisture curing polyurethane glues require water molecules for the polyadditional reaction. When water is involved in the curing reaction, it reacts with the isocyanate groups of glue and can lead to the formation of excessive carbon dioxide and thus can lead to glue penetration out of bond-line, additional backpressure. The dynamic viscoelastic parameters such as complex dynamic viscosity (ή), phase angle (δ), elastic storage modulus (G”), the viscous loss modulus (G”) of two kinds of polyurethane glues depending on added water amount (from 0.9% to 10.0%) at a constant frequency and deformation (oscillation mode) were determined using rheometer. The aim of the present study was to investigate impact of added water on rheological behavior of polyurethane glues. At the end of this study it was concluded that tested glues indicated various behavior depending on chemical composition and added water content. Gel formation point is higher in case of GlueI. However, gel formation time was higher in case of GlueII and was not dependent on added water content. Gel formation time was faster for GlueII. Nevertheless, faster formed gel is stronger than longer formed gel of GlueI.

The kinetics of plasma nitriding of CoCr alloy below temperatures of nitrides formation and mechanisms of nitrogen penetration are analyzed by proposed kinetic modeling in this article. Proposed nitrogen diffusion model is based on the trapping – detrapping (TD) model and developed taking into account the effect of the concentration dependent diffusivity of nitrogen, nitrogen adsorption on the surface of alloy and surface swelling process. The model indicates the influence of chromium atoms to nitrogen atoms diffusivity. The model consists of time and depth dependent diffusion, which is described by a partial differential equation, and it is solved by using Crank – Nicolson finite difference method. By fitting of experimental nitrogen depth profiles, it is shown that nitrogen diffusion coefficient varies with nitrogen concentration according to Einstein-Smoluchowski relation. Nitrogen depth profiles in plasma nitrided medical grade CoCr alloy (ISO 5831 – 12) at T = 400 °C for 1, 4 and 20 hours calculated on the basis of this model are in good agreement with experimental nitrogen profiles. Furthermore, the swelling process is showed and analyzed, derived the dependency of swelling rate on nitriding duration – the swelling rate is inversely proportional to the square root of nitriding duration. The obtained diffusion coefficient value and the swelling process rates satisfy the experimental data form Ref. The derived model explains physical processes during plasma nitriding and allows obtaining nitrogen depth profiles for any requisite nitriding duration.

Since 2014, there have been admission tests in mathematics for applicants to the Estonian University of Life Sciences for Geodesy, Land Management and Real Estate Planning; Civil Engineering; Hydraulic Engineering and Water Pollution Control; Engineering and Technetronics curricula. According to admission criteria, the test must be taken by students who have not passed the specific mathematics course state exam or when the score was less than 20 points. The admission test may also be taken by those who wish to improve their state exam score. In 2016, there were 126 such applicants of whom 63 took the test. In 2015, the numbers were 129 and 89 and in 2014 150 and 47 accordingly. The test was scored on scale of 100. The arithmetic average of the score was 30.6 points in 2016, 29.03 in 2015 and 18.84 in 2014. The test was considered to be passed with 1 point in 2014 and 20 points in 2015 and 2016. We analyzed test results and gave examples of problems which were solved exceptionally well or not at all.

Faba beans (Vicia faba L.) are an excellent protein source and should be more present in human diet, but due to their long cooking time, they are rarely used. So, in order to increase the accessibility of faba beans (Vicia faba L.), experiments were carried out to obtain new food products. Extrusion-cooking was chosen as the potential thermal cooking process and two different products were obtained. One was made exclusively from faba bean (Vicia faba L.) flour, while the second one was produced with a 50% addition of wheat flour to bean flour. Protein content, size, volume mass, pH and starch content for obtained products were analysed in order to characterise the products, as well as to see the differences from non-extruded faba beans (Vicia faba L.) and obtained samples. The experiments were carried out using faba beans (Vicia faba L.) obtained at Ltd. “Pure Horticultural Research Centre”. They were milled at Ltd. “Grauda spēks” and extruded with a twin screw extruder at Ltd. “Milzu”. The experiments showed that the extrusion process had decreased the protein content by 9%, but the starch content had risen by 13% with the addition of wheat flour. But, for sample, without added wheat flour differences were not significant. No significant size differences were observed in the obtained samples and pH values had no significant differences between extruded samples.

The aim of the study was to investigate the beef and dairy cow parasitosis epizootic situation in Vidzeme region. Research was done throughout Vidzeme territory during the period of the years 2013-2014. The total number of animals examined was: 273 dairy and 90 young beef cattle aged from 6 months to two years and 248 dairy and 29 beef cows older than two years. For the diagnosis of helminthes standardized ovoscopic and larvoscopic methods were used. For the diagnosis of protozoa flotation and modified Ziehl-Neelsen methods were used. The main species in the samples were Cryptosporidium spp., Eimeria spp. and Strongylus spp. In the young dairy and beef cattle aged from 6 months to two years and cattle older than two years Cryptosporidium spp. invasion accordingly was 32.6% and 19% (dairy cattle) and 62.2% and 65.5% (beef cattle); the invasion of Eimeria spp. 30% and 7.3% (dairy cattle) and 55.6% and 10.3% (beef cattle); and the invasion of Strongylus spp. was 17.6% and 13.7% (dairy cattle) and 43.3% and 27.6% (beef cattle). Both dairy and beef cattle were infected with Moniezia spp., Paramphistomum spp., Strongyloides spp. Dairy cows aged from 6 months to two years had Trichuris spp., Dictyocaulus spp. and Neoscaris spp. invasion.

The article deals with the problem of local mobility of peasants in Vilnius Governorate in the nineteenth century. To solve the problem, statistical-demographical data from the “Memory Books” permanently issued by the Tsarist Russian government was used. Pure demographic data brings little information, unless it is properly mathematically processed. Such processing leads to the discovering of new proportions concerning inhabitants, villages and farmsteads. Such proportions are related to the administrative territorial unit under investigation and show how many people reside in a farmstead and how many farmsteads are comprised in a village. In the course of time, numbers of villages and farmsteads change, and these numbers show the numbers of people taking part in local mobility of inhabitants. The higher are changes in villages and farmsteads, the higher is mobility of inhabitants.