The intensified use of palladium nanoparticles (PdNPs) in many chemical reactions, jewellery, electronic devices, in car catalytic converters and in biomedical applications lead to a significant increase in palladium exposure. Pd can cause allergic contact dermatitis when in contact with the skin. However, there is still a lack of toxicological data related to nano-structured palladium and information on human cutaneous absorption. In fact, PdNPs, can be absorbed through the skin in higher amounts than bulk Pd because NPs can release more ions. In our study, we evaluated the absorption of PdNPs, with a size of 10.7 ± 2.8 nm, using intact and damaged human skin in Franz cells. 0.60 mg cm−2 of PdNPs were applied on skin surface for 24 h. Pd concentrations in the receiving solutions at the end of experiments were 0.098 ± 0.067 μg cm−2 and 1.06 ± 0.44 μg cm−2 in intact skin and damaged skin, respectively. Pd flux permeation after 24 h was 0.005 ± 0.003 μg cm−2 h−1 and 0.057 ± 0.030 μg cm−2 h−1 and lag time 4.8 ± 1.7 and 4.2 ± 3.6 h, for intact and damaged skin respectively.This study indicates that Pd can penetrate human skin.

Recently polymer inclusion membranes (PIMs) have been proposed as materials for passive sampling, nonetheless a theoretical base to describe the mass transfer process through those materials, under such conditions of monitoring, has not been elucidated. Under the assumption that: (i) the transport of the metal ion occurs at steady state conditions, (ii) the concentration gradients are linear, and (iii) the kinetics of the chemical reactions in the extraction process on the membrane are elemental; an equation for the passive sampling of copper (II) using a PIM system containing Kelex-100 as carrier is derived. The prediction capacity of this sampler under different conditions of temperature, metal concentration, flow velocity, ionic strength and pH is analyzed as well. Among the dependencies of the PIM on the physicochemical conditions, effects of concentration, temperature and flow velocity tend to increment copper (II) flux across the membrane, being the parameter temperature the one with the most pronounced effect at T ≥ 30 °C. Ionic strength had no great effect on passive sampler response, however the sampler is dependent on the acidity of the medium. The comparable metal ion concentrations estimated from the PIM sampler to those obtained by direct measurements of the sampling medium suggest that PIMs can be robust materials when used as passive sampler devices.

Leachates from municipal landfills are formed as infiltration waters flowing through the landfill. They contain toxic, dissolved products of biochemical reactions taking place in the deposit. They cause soil and groundwater pollution. It is necessary to take them out of the landfill cover and utilize toxins contained therein, in particular heavy metals. Such processes are conducted with the use of microorganisms. Due to the content of toxic compounds, introducing leachates into the process of biological purification poses a threat to the microorganisms used in these processes.An alternative to microbial co-treatment of sludge and leachate as well as soil contaminated with communal leachate is to use red hybrid of California (Eisenia fetida Sav.), an earthworm resistant to environmental toxins, in particular heavy metals.The aim of the conducted research is to demonstrate the possibility of using red hybrid of California in leachate bioutilization as a complementary or alternative method to the process of leachate utilization with the use of microorganisms.The obtained results led to the conclusion that Eisenia fetida accumulates environmental toxins well. By collecting and processing them in the tissues, it remedies the substrate and retains long life and fertility, and the ability to reproduce. The research demonstrated high dynamics of population growth (from 25 individuals in the initial deposit to 298 individuals after six months of research). These properties are related to the presence of enzyme proteins from the metallothionein group in the gastrointestinal tract cells. Packing heavy metals found in leachates into the metallothionein coat limits their toxic effect on earthworm tissues, which confirms the possibility of using earthworms in the processes of detoxification of municipal leachate.

A conversion of the global terrestrial carbon sink to a source is critically dependent on the microbially mediated decomposition of soil organic matter (SOM). We have developed a detailed, process-based, mechanistic model for simulating SOM decomposition and its associated processes, based on Microbial Kinetics and Thermodynamics, called the MKT model. We formulated the sequential oxidation-reduction potential (ORP) and chemical reactions undergoing at the soil-water zone using dual Michaelis-Menten kinetics. Soil environmental variables, as required in the MKT model, are simulated using one of the most widely used watershed-scale models - the soil water assessment tool (SWAT). The MKT model was calibrated and validated using field-scale data of soil temperature, soil moisture, and N₂O emissions from three locations in the province of Saskatchewan, Canada. The model evaluation statistics show good performance of the MKT model for daily soil N₂O simulations. The results show that the proposed MKT model can perform better than the more widely used process-based and SWAT-based models for soil N₂O simulations. This is because the multiple processes of microbial activities and environmental constraints, which govern the availability of substrates to enzymes were explicitly represented. Most importantly, the MKT model represents a step forward from conceptual carbon pools at varying rates.

Air pollutants emitted from vehicles in street canyons may be reactive, undergoing mixing and chemical processing before escaping into the overlying atmosphere. The deterioration of air quality in street canyons occurs due to combined effects of proximate emission sources, dynamical processes (reduced dispersion) and chemical processes (evolution of reactive primary and formation of secondary pollutants). The coupling between dynamics and chemistry plays a major role in determining street canyon air quality, and numerical model approaches to represent this coupling are reviewed in this article. Dynamical processes can be represented by Computational Fluid Dynamics (CFD) techniques. The choice of CFD approach (mainly the Reynolds-Averaged Navier-Stokes (RANS) and Large-Eddy Simulation (LES) models) depends on the computational cost, the accuracy required and hence the application. Simplified parameterisations of the overall integrated effect of dynamics in street canyons provide capability to handle relatively complex chemistry in practical applications. Chemical processes are represented by a chemical mechanism, which describes mathematically the chemical removal and formation of primary and secondary species. Coupling between these aspects needs to accommodate transport, dispersion and chemical reactions for reactive pollutants, especially fast chemical reactions with time scales comparable to or shorter than those of typical turbulent eddies inside the street canyon. Different approaches to dynamical and chemical coupling have varying strengths, costs and levels of accuracy, which must be considered in their use for provision of reference information concerning urban canopy air pollution to stakeholders considering traffic and urban planning policies.

Biogenic Volatile Organic Compounds (BVOC) play a critical role in biosphere–atmosphere interactions and are key factors of the physical and chemical properties of the atmosphere and climate. However, few studies have been carried out at urban level to investigate the interactions between BVOC emissions and ozone (O3) concentration. The contribution of urban vegetation to the load of BVOCs in the air and the interactions between biogenic emissions and urban pollution, including the likely formation of O3, needs to be investigated, but also the effects of O3 on the biochemical reactions and physiological conditions leading to BVOC emissions are largely unknown. The effect of BVOC emission on the O3 uptake by the trees is further complicating the interactions BVOC–O3, thus making challenging the estimation of the calculation of BVOC effect on O3 concentration at urban level.

PURPOSE OF REVIEW: Many of the highly populated and industrialized countries are paying more attention to green fuels. The conventional methods for biodiesel purification processes result in a large quantity of polluted water, leading to serious environmental concerns. To overcome the challenges in the existing process, addressing the membrane technology is a viable solution to direct further research toward sustainable membrane-based green production. RECENT FINDINGS: The developing membrane technology is an alternative method for eliminating wastewater during biodiesel production from conventional processes. This paper provides a comprehensive review of recent development applications of the catalytic membrane and membrane materials for high-quality biodiesel production. Both polymeric and ceramic membranes result in optimum performance of more than 90% effective conversion and purification. The catalytic membrane reactor integrates chemical reaction and product separation concurrently in a single device system to produce high-quality biodiesel. Glycerol purification of 99% was achieved in the potential membrane distillation process. This review critically summarizes biodiesel production and purification using membrane techniques and membrane reactors. Membrane material and separation efficiency were discussed in a short view. Besides, the significance of catalytic membrane reactor is outlined. Glycerol separation and purification by removal of water and other residual impurities were potentially achieved using membrane technology. Apart from applications of the membrane, the novel attempt of a combined description of influencing factors and limitations of the membrane during biodiesel production was revealed. Therefore, membrane applications in high-grade biodiesel and value-added byproduct production are the predominant green technological approach for next-generation biofuels.

Measurements of 16 polycyclic aromatic hydrocarbon (PAH) congeners (particles and vapour) have been made at three sites over a distance of 230 km on the Red Sea coast of Saudi Arabia. The data have been pooled with an earlier dataset from three sites in the city of Jeddah, with one urban site common to both studies. The concentrations and congener profiles are broadly similar for the two measurement campaigns at the common site. Coefficients of Divergence have been calculated and show more substantial differences between the sites within the city of Jeddah than are found between the sites to the north of the city which emphasises the strong concentration gradients within Jeddah in comparison to those found in the atmosphere of the coastal sites to the north of the city. A sub-set of data corresponding to days on which the air mass travelled from the northwest parallel with the Red Sea coast, hence linking the three sites, showed a progressive reduction in concentrations as the air mass travelled towards the southeast, which is attributed to emissions from a large source area to the northwest of the sampling sites and either atmospheric dilution or chemical reaction accounting for a progressive reduction in concentrations with advection of the air mass. The congener profile is very similar to that identified in earlier work relating to oil refinery emissions and is consistent with the major petrochemical installation at Yanbu contributing substantial emissions to the atmosphere which are advected to downwind sites.