细化搜索
结果 1-10 的 24
Analysis of microbeads in cosmetic products in the United Arab Emirates
2020
Habib, Rana Zeeshan | Salim Abdoon, Morog Mohammed | Al Meqbaali, Reem Mohammed | Ghebremedhin, Furtuna | Elkashlan, Marim | Kittaneh, Wajeeh Faris | Cherupurakal, Nizamudeen | Mourad, Abdel-Hamid Ismail | Thiemann, Thies | Al Kindi, Ruwaya
The microparticle content of 37 common facial and body scrubs commercially available in the United Arab Emirates was analyzed. The chemical composition, ash content, physical characteristics, loading, particle size and shape of the microparticles were determined. Only 11 out of 37 products were found to have microplastic content. Many of the remaining products exhibited microparticles composed of microcrystalline cellulose and crushed walnut shells. Differential scanning calorimetry showed that microplastic products had softening points as low as 84 °C. Plastic microbeads of 2 products were found to fuse at 100 °C. The fusion altered the flotation characteristics of the microbeads of one product. Heat treatment of the product at 100 °C in the presence of silica gel led to entrainment of the silica and partial fragmentation of the beads upon cooling. This may be understood as one mechanism of fragmentation of a microplastic with a low softening point in the presence of hard soil particles under temperature cycling.
显示更多 [+] 显示较少 [-]To what extent are microplastics from the open ocean weathered?
2017
ter Halle, Alexandra | Ladirat, Lucie | Martignac, Marion | Mingotaud, Anne-Françoise | Boyron, Olivier | Perez, Emile
It is necessary to better characterize plastic marine debris in order to understand its fate in the environment and interaction with organisms, the most common type of debris being made of polyethylene (PE) and polypropylene (PP). In this work, plastic debris was collected in the North Atlantic sub-tropical gyre during the Expedition 7th Continent sea campaign and consisted mainly in PE. While the mechanisms of PE photodegradation and biodegradation in controlled laboratory conditions are well known, plastic weathering in the environment is not well understood. This is a difficult task to examine because debris comes from a variety of manufactured objects, the original compositions and properties of which vary considerably. A statistical approach was therefore used to compare four sample sets: reference PE, manufactured objects, mesoplastics (5–20 mm) and microplastics (0.3–5 mm). Infrared spectroscopy showed that the surface of all debris presented a higher oxidation state than the reference samples. Differential scanning calorimetry analysis revealed that the microplastics were more crystalline contrarily to the mesoplastics which were similar to references samples. Size exclusion chromatography showed that the molar mass decreased from the references to meso- and microplastics, revealing a clear degradation of the polymer chains. It was thus concluded that the morphology of marine microplastic was much altered and that an unambiguous shortening of the polymer chains took place even for this supposedly robust and inert polymer.
显示更多 [+] 显示较少 [-]Monitoring polymer degradation under different conditions in the marine environment
2020
Beltrán-Sanahuja, Ana | Casado-Coy, Nuria | Simó-Cabrera, Lorena | Sanz-Lázaro, Carlos
The perdurability of plastics in the environment is one of the major concerns of plastic pollution and, as a consequence, oceans are accumulating large amounts of plastic. The degradation of conventional and biobased materials was evaluated through a laboratory experiment for a year simulating four different conditions in the marine environment. The water column environmental compartment was simulated under euphotic and aphotic (with and without light availability) conditions. The seafloor environmental compartment was simulated with sediment under non-polluted and polluted conditions. By combining weight loss (%), spectroscopic and thermal analyses, the degradation patterns regarding the polymer structure were assessed. The studied biobased materials were polylactic acid (PLA) based materials and showed higher degradability than conventional ones. The weight loss of conventional materials was not influenced by the water column or sediment, while in PLA-based materials, the degradation rates were ca. 5 times greater in the sediment than in the water column. The absorbance (Abs) value at 3400 cm⁻¹ for polyethylene terephthalate (PET), and carbonyl (CO) index for PET and PLA could be useful to detect early signs of degradation. The crystallization index could be a useful parameter to discriminate degradation stages. The obtained results highlight the different degradability rates of materials depending on the specific environmental marine conditions.
显示更多 [+] 显示较少 [-]Identification of marine microplastics in Eastern Harbor, Mediterranean Coast of Egypt, using differential scanning calorimetry
2019
Shabaka, Soha Hamdy | Ghobashy, Mohamed | Marey, Rasha Saad
Microplastic pollution has gained significant attention, and there are growing concerns about its potential effects on aquatic environments. The lack of proper solid waste management in Egypt has resulted in the accumulation of plastic litter and its deposition in waterways. However, no attempts have been made to identify or assess marine plastic litter in Egypt. We provide, for the first time, a precise, simple, and cost-effective method to identify microplastics in Eastern Harbor by using differential scanning calorimetry (DSC). This screening revealed the presence of ten polymers in seawater and shoreline sediments. Most of the extracted microplastics are secondary microplastics, as they appear to be remnants of larger plastic fragments.
显示更多 [+] 显示较少 [-]Characterization of biodegradable poly-3-hydroxybutyrate films and pellets loaded with the fungicide tebuconazole
2016
Volova, Tatiana G. | Zhila, Natalia | Vinogradova, Olga | Shumilova, Anna | Prudnikova, Svetlana | Shishatskaya, Ekaterina
Biodegradable polymer poly(3-hydroxybutyrate) (P3HB) has been used as a matrix to construct slow-release formulations of the fungicide tebuconazole (TEB). P3HB/TEB systems constructed as films and pellets have been studied using differential scanning calorimetry, X-ray structure analysis, and Fourier transform infrared spectroscopy. TEB release from the experimental formulations has been studied in aqueous and soil laboratory systems. In the soil with known composition of microbial community, polymer was degraded, and TEB release after 35 days reached 60 and 36 % from films and pellets, respectively. That was 1.23 and 1.8 times more than the amount released to the water after 60 days in a sterile aqueous system. Incubation of P3HB/TEB films and pellets in the soil stimulated development of P3HB-degrading microorganisms of the genera Pseudomonas, Stenotrophomonas, Variovorax, and Streptomyces. Experiments with phytopathogenic fungi F. moniliforme and F. solani showed that the experimental P3HB/TEB formulations had antifungal activity comparable with that of free TEB.
显示更多 [+] 显示较少 [-]Preparation of PCL/Clay and PVA/Clay Electrospun Fibers for Cadmium (Cd+2), Chromium (Cr+3), Copper (Cu+2) and Lead (Pb+2) Removal from Water
2016
Fibrous mats of polymer/clay were obtained by electrospinning method, and their capacity for heavy metals removal from water was evaluated. Four different fibrous mats were prepared from a corresponding polymer/clay solutions. The precursor materials employed were poly-ε-caprolactone, polyvinyl alcohol polymers, kaolin, and metakaolin clays. Raw materials and the prepared fiber mats characterization were carried out using scanning electron microscopy, Fourier transformed infrared spectroscopy, X-ray diffraction, termogravimetric analysis, differential thermal analysis, and differential scanning calorimetry. Elemental composition of the materials was obtained using energy-dispersive X-ray spectroscopy. The environmental applications of polymer/clay materials were tested for water treatment by heavy metals (cadmium (Cd⁺²), chromium (Cr⁺³), copper (Cu⁺²), and lead (Pb⁺²)) sorption. Kinetic adsorption studies were conducted employing heavy metal solutions with initial concentration of 200 mg/L, and the amount of heavy metal adsorbed and kinetics parameters was determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES). According to the kinetic data, the adsorption process of Cd⁺², Cr⁺³, Cu⁺², and Pb⁺² onto polymer/clay is favorable for the prepared materials and they follow a pseudo-first-order model according to the kinetic analysis. Additionally, the intraparticle diffusion was evaluated by applying the Morris and Weber model; in order to investigate the contribution of film resistance to the kinetics of the heavy metals adsorption, the adsorption kinetic data was further analyzed by Boyd’s film-diffusion model.
显示更多 [+] 显示较少 [-]One-Pot Construction of Titania-γ-AlOOH Nanocomposites Employed for Photocatalytic Degradation
2012
Zhang, Fei | Zhang, Min | Wang, Gang | Shi, Wenjian | Hu, Xuefeng
A series of aluminum oxyhydroxide-incorporated titania composites were prepared by a one-pot synthetic procedure using aluminum tri-sec-butoxide as a precursor. The as-synthesized samples were characterized by Fourier transform infrared spectrophotometer, X-ray diffraction, thermogravimetry and differential scanning calorimetry, nitrogen physisorption, and scanning electron microscopy. It was identified that aluminum oxyhydroxide (γ-AlOOH, or boehmite) was produced as aluminum matrix into which titania, commercially available P25, was incorporated. Photocatalytic activity of all nanocomposites was evaluated with respect to the photodecolorization of methyl orange under UV irradiation and almost complete decolorization was eventually achieved under optimum experimental conditions.
显示更多 [+] 显示较少 [-]Investigation of toxic effects of amorphous SiO2 nanoparticles on motility and oxidative stress markers in rainbow trout sperm cells
2019
Özgür, Mustafa Erkan | Ulu, Ahmet | Özcan, İmren | Balcioglu, Sevgi | Ateş, Burhan | Köytepe, Süleyman
In this study, we investigated the effects of SiO₂ nanoparticles (SiO₂-NPs) (1, 10, 25, 50, and 100 mg/L) for 24 h in vitro on the motility parameters and oxidative stress markers such as total glutathione (TGSH), catalase (CAT), and malondialdehyde (MDA) of rainbow trout, Oncorhynchus mykiss sperm cells. Therefore, SiO₂-NPs were synthesized with sol-gel reaction from tetraethoxy orthosilicate (TEOS). The prepared nanoparticle structures were characterized for chemical structure, morphology and thermal behavior employing Fourier transform infrared spectroscopy, X-ray spectroscopy, scanning electron micrograph, and thermal analysis (DTA/TGA/DSC) techniques. After exposure, there was statistically significant (p < 0.05) decreases in velocities of sperm cells. CAT activity significantly (p < 0.05) decreased by 9.6% in sperm cell treated with 100 mg/L. In addition, MDA level significantly increased by 70.4% and 77.5% in sperm cell treated with 50 and 100 mg/L SiO₂-NPs, respectively (p < 0.05). These results showed that SiO₂-NPs may have toxic effect on rainbow trout sperm cells in 50 mg/L and more.
显示更多 [+] 显示较少 [-]Total salinity elimination during preservation of animal skins: a sustainable approach through benign alternatives
2019
Sundar, John | Muralidharan, Chellappa
Use of sodium chloride to preserve animal skins and hides is becoming increasingly untenable due to stringent environmental regulations. In the present research work, a combination of sparingly soluble alkali and water-soluble polymer of ethylene oxide has been used to preserve skins with an objective of total elimination of common salt for preservation. A comprehensive study has been made for evaluating various parameters, such as dehydration and rehydration behaviours of skins, microbial growth, emission loads and physico-chemical characteristics of the cured skin to validate the salt-free preservation system developed. The shrinkage temperature, denaturation temperature and mechanical strength of tanned leather were analysed by using shrinkage, differential scanning calorimetric and thermomechanical analysis techniques. The new curing system has been found to be effective in preserving the skin as indicated by the various parameters studied and the final leather quality. The significant reduction in total solids content such as dissolved solids and suspended solids present in the effluent compared to conventional preservation method is evident from environmental impact assessment studies.
显示更多 [+] 显示较少 [-]Characterization and quality assessment of recycled post-consumption poly(ethylene terephthalate) (PET)
2018
Masmoudi, Fatma | Fenouillot, Françoise | Mehri, Afef | Jaziri, Mohamed | Ammar, Emna
In the present study, the recycled post-consumption polyethylene terephthalate (PET) flakes were investigated as possible raw materials for the production of food packaging. After heating at 220 °C for 1 h, a steaming stage was conducted as a control test to assess the quality of the product. Different samples were characterized by ¹H-NMR, FT-IR, DSC/TGA analysis, viscosity index (VI), and trace metals analysis. The results showed that the recycled post-consumed PET flakes’ properties were generally conform to the standard norms of PET except the color of some flakes turned to yellow. Subsequently, a complementary study was undertaken to assess whether the material could be possibly reused for food packaging. For this purpose, rheological, thermal, and mechanical characterizations were performed. The results of the comparative study between the virgin and the recycled PET flakes concluded that the PET recycling affected the rheological properties but did not have any significant effect on their thermal and mechanical characteristics. Hence, it was deduced that the post-consumed PET flakes could be reused as a packaging material except food products.
显示更多 [+] 显示较少 [-]