Microplastic pollution in estuarine and coastal environments has recently been characterised in several countries but few researchers have addressed the influence of different forms of coastal zone use on the distribution of microplastic. Here, microplastic particles were sampled in Hangzhou Bay, which is heavily influenced by a range of human activities, and their abundance, size, and polymer type characterised. The abundance of microplastics was 0.14 ± 0.12 items/m³ in water, 84.3 ± 56.6 items/kg dry weight of sediment, and between 0.25 ± 0.14 and 1.4 ± 0.37 items/individual in biota. These results show that Hangzhou Bay has a low level of microplastic contamination compared to other coastal systems in China, although abundance was spatially variable within the bay; relatively higher microplastic abundances were found in the southern area of the bay, which has adjacent industrial and urban land-use zones, while lower abundances were observed in the central and northern bay areas where mariculture, fisheries, and mineral and energy industries are most common. The relatively low microplastic abundance observed in the biota samples is consistent with the generally low values for the seawater and sediment samples. Pellets were the most common of four particle-shape classes (fibres, fragments, films, and pellets) in surface seawater, while fibres were most abundant in sediment and biota. Smaller-sized microplastics (<1.0 mm) were dominant in all samples. Microplastics in the surface seawater were dominated by low-density polypropylene and polyethylene particles, while rayon was dominant in the sediment and biota samples. Our results demonstrate that regional variability in anthropogenic activity and land-use are important controls on the spatial pattern of microplastic pollution in Hangzhou Bay.

NO₂ oxidation of soot exhausted from engines is more efficient than O₂ under low-temperature conditions, and is crucial for diesel particulate filter to control soot pollution. To explore the principle behind accelerating soot oxidation by NO₂, this paper uses density functional theory to reveal soot oxidation process by NO₂. This study contributes to understanding rules of soot oxidation by NO₂ and perfecting soot oxidation models to develop soot emission control technologies. Results show that NO₂ oxidation of pyrene radical involves three steps. Firstly, NO₂ attacks the C∗ atom to form –C (NO₂) with reaction energy of 306.3 kJ/mol, which decomposes to produce a –C (O) compound. Secondly, another NO₂ molecule climbs over an energy barrier of 8.8 kJ/mol, and changes into a –C (ONO₂) intermediate on –C (O). Finally, the N or O atom of NO₂ attacks –C (O) for a second time to help open aromatic ring for releasing CO or CO₂. Further decomposition of –C (NO₂) and –C (ONO₂) requires activation energies of 81.6 kJ/mol, 75.7 kJ/mol, and 53.5 kJ/mol, respectively, on preferential pathways. Calculations prove that attacks of O atom from NO₂ on C∗ help open the aromatic ring more efficiently than N atom.

An upsurge in global population due to speedy urbanization and industrialization is facing significant challenges such as rising energy-demand, enormous waste-generation and environmental deterioration. The waste-to-energy nexus based on the 5R principle (Reduce, Reuse, Recycle, Recovery, and Restore) is of paramount importance in solving these Gordian knots. This review essentially concentrates on latest advancements in the field of ‘simultaneous waste reduction and energy production’ technologies. The waste-to-energy approaches (thermal and biochemical) for energy production from the agricultural residues are comprehensively discussed in terms environmental, techno-economic, and policy analysis. The review will assess the loopholes in order to come up with more sophisticated technologies that are not only eco-friendly and cost-effective, but also socially viable. The waste-to-energy nexus as a paradigm for sustainable development of restoring waste is critically discussed considering future advancement plans and agendas of the policy-makers.

Since ambient particulate matter (APM) is closely related to cardiovascular damage with mitochondria being its potential targets, this study was designed to explore the impact of APM on mitochondrial homeostasis, especially on mitochondrial dynamics and biogenesis in human vascular endothelial cells, using a kind of standard material, PM SRM1648a. As a result, internalized particles lead to mitochondrial dysfunction in EA.hy926 human endothelial cells, including mitochondrial reactive oxygen species (mtROS) overproduction, mitochondrial membrane potential (MMP) reduction and adenosine triphosphate (ATP) inhibition, coupled with additional release of mitochondrial DNA (mtDNA) into the cytosol. Moreover, morphological and structural changes in mitochondria are observed in response to PM SRM1648a. In that aspect, according to the evidence of shorter fragmented mitochondria dispersed throughout the cytoplasm, along with aberrant upregulation of fission-related mRNAs/proteins, the mitochondria exhibit a fission phenotype shifting from intact reticular network to fragmentized punctate shapes. Mechanistically, PM SRM1648a facilitates phosphorylation of DRP1 at Ser616 in HUVECs, and triggers its dephosphorylation at Ser637 residue in both EA.hy926 and HUVECs, which are supportive events for mitochondrial fission during particle exposure. Additionally, suppression of a master energy modulator, PGC-1α, reveals that PM SRM1648a has the ability to impair mitochondrial biogenesis. Collectively, it could be well concluded that PM SRM1648a interferes with the equilibrium of mitochondrial dynamics and biogenesis, which is likely to play a pivotal role in mitochondrial dysfunction driven by particles, eventually contributing to endothelial cell damage. Of note, it is more reasonable to conduct risk assessment from both cellular level and subcellular structures, among which mitochondria-targeted toxicity supplements more comprehensive understanding of APM inducible vascular toxicity.

Although nanoscale surface roughness has been theoretically demonstrated to be a crucial factor in the interaction of colloids and surfaces, little experimental research has investigated the influence of roughness on colloid or silver nanoparticle (AgNP) retention and release in porous media. This study experimentally examined AgNP retention and release using two sands with very different surface roughness properties over a range of solution pH and/or ionic strength (IS). AgNP transport was greatly enhanced on the relatively smooth sand in comparison to the rougher sand, at higher pH, and lower IS and fitted model parameters showed systematic changes with these physicochemical factors. Complete release of the retained AgNPs was observed from the relatively smooth sand when the solution IS was decreased from 40 mM NaCl to deionized (DI) water and then the solution pH was increased from 6.5 to 10. Conversely, less than 40% of the retained AgNPs was released in similar processes from the rougher sand. These observations were explained by differences in the surface roughness of the two sands which altered the energy barrier height and the depth of the primary minimum with solution chemistry. Limited numbers of AgNPs apparently interacted in reversible, shallow primary minima on the smoother sand, which is consistent with the predicted influence of a small roughness fraction (e.g., pillar) on interaction energies. Conversely, larger numbers of AgNPs interacted in deeper primary minima on the rougher sand, which is consistent with the predicted influence at concave locations. These findings highlight the importance of surface roughness and indicate that variations in sand surface roughness can greatly change the sensitivity of nanoparticle transport to physicochemical factors such as IS and pH due to the alteration of interaction energy and thus can strongly influence nanoparticle mobility in the environment.

The presence of polystyrene (PS) waste increases constantly. Styrofoam, the most popular form of PS, is one of the major plastic pollutants in the environment. An efficient and environmentally friendly method of PS recycling is still needed. The biodegradation of PS by insects has been presented by researchers as a promising alternative to chemical, mechanical and thermal methods. The main aim of this study was to assess the survival, growth, and development of yellow mealworms (the larvae of Tenebrio molitor) fed with PS to determine if the insects are able to use PS as a source of mass and energy. The Dynamic Energy Budget (DEB) model was used to analyze the effects of food type on the growth trajectory and metabolism of tested organisms. We investigated five possible modes of influence of PS diet on DEB model parameters including a decrease of food availability, an increase in somatic maintenance power, an increase in costs for structure, allocation of energy, and a decrease in somatic maintenance power. Our results show that changes in the development of larvae fed with PS are mainly caused by a decrease in reserves density and reaction of the organism to the insufficient food supply. The inability or difficulty in completing the life cycle of T. molitor larvae fed with PS raises doubts about the use of mealworms as an effective technology for utilizing polystyrene.

The long-term contamination of soil by microplastics may pose risks that are often still not well understood, and the ecological effects of microplastics are mainly dependent on their environmental behavior in environments. This study used saturated quartz sand as a solid porous medium to study the migration and influencing factors of 40–48 μm polyethylene (PE) particles in saturated porous media. The breakthrough curves at different injection concentrations (0.3, 0.4, 0.5 mg/L), flow rates (1.0, 1.5, 2.0, 2.5 ml/L), porous medium particle sizes (1–2, 2–4 mm), ionic strengths (0, 0.01, 0.05 mol/L) and concentrations of fulvic acid (FA) (0, 5, 10 mg/L) were compared and analyzed. The Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was used to more accurately explain relevant transport behaviors. The results showed that the input concentration, flow rate, and particle size can affect the migration of PE particles individually or in combination. As ionic strength increased, the repulsion between microplastics and quartz sand gradually disappeared according to DLVO theory, and their attraction gradually strengthened. As a result, fewer microplastics could penetrate the sand column and reach the water body. With the continuous addition of FA, the repulsive energy between microplastics and quartz sand rose from DLVO theory, and the migration ability of microplastics initially increased before becoming stable because of the effect of straining. In all cases, the migration ability of PE was low (C/C₀ < 0.35), and most PE particles remained in the porous media during the whole experimental periods. This study provides new insights of understanding the migration of microplastics in environment.

In this study, a novel rotating anode-based reactor (RAR) was designed to investigate its effectiveness in removing dissolved salts (i.e., Br⁻, Cl⁻, TDS, and SO₄²⁻) from saline water samples. Two configurations of an impeller’s rotating anode with various operation factors, such as operating time (min), rotating speed (rpm), current density (mA/cm²), temperature (°C), pH, and inter-electrode space (cm), were used in the desalination process. The total cost consumed was calculated on the basis of the energy consumption and aluminum (Al) used in the desalination. In this respect, operating costs were calculated using optimal operating conditions. Salinity was removed electrochemically from saline water through electrocoagulation (EC). Results showed that the optimal adjustments for treating saline water were carried out at the following conditions: 150 and 75 rpm rotating speeds for the impeller’s rod anode and plate anode designs, respectively; 2 mA/cm² current density (I), 1 cm² inter-electrode space, 25 °C temperature, 10 min operation time, and pH 8. The results indicated that EC technology with impeller plates of rotating anode can be considered a very cost-effective technique for treating saline water.

In recent years, there has been a sharp increase in interest in the development of environmentally friendly technology for burning methane gas hydrate. In addition to solving energy problems, gas hydrates will help to make significant progress in solving environmental problems. The use of gas hydrate combustion technology is shown to reduce harmful emissions. In this work, experimental studies on the combustion of double hydrate powder of propane-methane have been performed at five different ways of combustion organization. Powder heating was realized using: 1) induction heating; 2) radiation and convective heating; 3) using a hot metal body; 4) combustion without forced gas flow and 5) combustion in the presence of forced and free air convection. Currently there has been neither a comprehensive study of the combustion of double gas hydrates, nor a comparison of the combustion efficiency for different methods; besides, no data on emissions have been obtained. The maximum dissociation rate is implemented with the use of induction heating. Using a gas analyzer the concentration of gases during the gas hydrate combustion has been measured. Comparison of different ways of combustion allows optimizing the combustion efficiency of gas hydrates.

The biological effects of nanoplastics are a growing concern. However, most studies have focused on exposure to high concentrations or short-term exposure. The potential effects of exposure to low environmental nanoplastic concentrations over the long-term and across multiple generations remain unclear. In the present study, Daphnia pulex was exposed over three 21-day generations to a typical environmental nanoplastic concentration (1 μg/L) and the effects were investigated at physiological (growth and reproduction), gene transcription and enzyme activity levels. Chronic exposure did not affect the survival or body length of D. pulex, whereas the growth rate and reproduction were influenced in the F2 generation. Molecular responses indicated that environmental nanoplastic concentrations can modulate the response of antioxidant defenses, vitellogenin synthesis, development, and energy production in the F0-F1 generations, and prolongation resulted in inhibitory effects on antioxidant responses in F2 individuals. Some recovery was observed in the recovery group, but reproduction and stress defenses were significantly induced. Taken together, these results suggest that D. pulex recovery from chronic exposure to nanoplastic may take several generations, and that nanoplastics have potent long-term toxic effects on D. pulex. The findings highlight the importance of multigenerational and chronic biological evaluations to assess risks of emerging pollution.