Purpose. To determine the level of productivity of sunflower hybrids, their stability and plasticity for cultivation in the Left Bank Forest-Steppe of Ukraine.Methods. The field experiment was performed in the conditions of the Left-Bank Forest-Steppe of Ukraine in 2016–2018. The peculiarities of plant growth and development, formation of yield of hybrids ‘Ukrainskyi F1’ (k), ‘P64LL125’, ‘P63LE10’, ‘P64F50’, ‘P64F66’, ‘P63LL06’, ‘NK Konti’ (k), ‘NK Brio’, ‘P64LE99’, ‘Laskala’, ‘Kupava’. Yield plasticity was calculated and analyzed by the Ebergard – Russell method.Results. Over the years of research, the average yield of sunflower hybrids in the Left-Bank Forest-Steppe of Ukraine varied from 2.71 to 4.04 t/ha. The lowest yield was shown by the ‘Ukrainskyi F1’ hybrid – 2.42–3.05 t/ha, the highest ‘Laskala’ – 3.79–4.26 t/ha. It was determined that in the conditions of the Left-Bank Forest-Steppe, there is no absolute predominance of medium-ripe hybrids in terms of yield.Conclusions. According to the results of the analysis of yield plasticity of sunflower hybrids, it was determined that the group of samples with high yield plasticity includes ‘Ukrainskyi F1’, ‘P64F50’, ‘P64F66’, ‘NK Konti’, ‘NK Brio’, ‘P64LE99’, ‘Lascala’ and ‘Kupava’. They respond to the improvement of the level of agricultural technology and provide the maximum yield only under the conditions of optimal factors. Hybrids ‘P64LL125’, ‘P63LE10’ and ‘P63LL06’ are more stable in response to changes in growing conditions without reductions in yield. As for the shares of the influence of the studied factors, the yield of the hybrid ‘Ukrainskyi F1’ was most influenced by the conditions of the year, ‘NK Brio’ – the sowing rate. For the ‘NK Ferti’ hybrid, the conditions of the year and the sowing rate are equally important.

Purpose. To study the features of the productivity formation of broccoli hybrids depending on the methods of application of “5 element” nanofertilizer in the conditions of the Western Forest-Steppe of Ukraine.Methods. Field, laboratory, statistical.Results. With the introduction of “5 element” nanofertilizer, the head diameter of the ‘Batavia F1’ hybrid increased from 16.6 (var. 2) to 18.3 cm (var. 8), while in the control this indicator was 15.9 cm. The biggest head diameter in the hybrid ‘Orantes F1’ 18.9 and 18.7 cm was noted with foliar feeding with “5 element” nanofertilizer in the phase of 4–6 leaves + beginning of head formation + 10–12 days after the beginning of head formation and in the phase of the beginning of head formation + 10–12 days after the beginning of head formation. Accordingly, in the aforementioned variants, the head mass was 901 and 863 g, which is higher than the control (without treatment) by 166 and 128 g, or 22.3 and 17.4%.The highest yield of the ‘Batavia F1’ hybrid was obtained in 8 and 7 variants of the experiment – 33.5 and 31.9 t/ha, respectively, the yield increase was 5.2 and 3.6 t/ha, or 18.4 and 12.7%. In the hybrid ‘Orantes F1’ the highest yield (37.1 t/ha) was recorded when applying the “5 element” nanofertilizer in the 8th variant of the experiment, which is 6.6 t/ha higher than the control, or 21.6%. Compared to the ‘Batavia F1’ hybrid, the yield in this variant of the ‘Orantes F1’ hybrid was 3.6 t/ha, or 9.7%. The diameter and weight of the head, as well as the yield of the hybrid ‘Orantes F1’ were larger compared to the hybrid ‘Batavia F1’, due to its biological characteristics. A strong correlation (r = 0.97 and 0.96) was revealed between the yield and the diameter of the broccoli head in the ‘Batavia F1’ and ‘Orantes F1’ hybrids. The quality indicators of broccoli (dry matter, sum of sugars and vitamin C) in the ‘Orantes F1’ hybrid were higher compared to the ‘Batavia F1’ hybrid. A tendency towards a decrease in the concentration of nitrates in the heads of broccoli with an increase in the number of treatments with nanofertilizer “5 element” was revealed. The concentration of nitrates in the ‘Orantes F1’ hybrid was lower in all variants of the experiment in comparison with the ‘Batavia F1’ hybrid. The concentration of nitrates in the heads of broccoli in all variants of the experiment did not exceed TLV (400 mg/kg wet weight).Conclusions. With an increase in the number of foliar treatments with “5 element” nanofertilizer, the yield increased and the quality of broccoli hybrids improved. It was revealed that the yield of the ‘Orantes F1’ hybrid in all variants of the experiment was higher in comparison with the ‘Batavia F1’ hybrid. When applying nanofertilizer “5 element” in three stages – foliar feeding in the phase of 4–6 leaves + beginning of head formation + 10–12 days after the beginning of head formation – we got the highest yield of broccoli in the hybrid ‘Orantes F1’ – 37.1 t/ha, an increase over the control variant (without fertilizers) was 6.6 t/ha, or 21.6%. The ‘Batavia F1’ hybrid had a yield of 33.5 t/ha, an increase over the control variant – 5.2 t/ha, or 18.4%.

Purpose. Develop a simplified method for estimating the color of flour and pasta using Adobe Photo Shop® software.Methods. The research material was grain of varieties and selection lines of wheat species Triticum durum, T. dicoccum, T. timopheevii bred in the Рlant Production Institute nd. a. V. Ya. Yuryev and samples of the National Center for Genetic Resources of Plants of Ukraine, 2018–2020 harvest. Batch of flour and pieces of dough were scanned using EPSON Scanner 010 F. Color was evaluated using Adobe PhotoShop®. The level of carotenoids was determined by spectrophotometric method.Results. Visual assessments of flour and pasta color, presented by different researchers, differ significantly (up to 2–3 points on a 9-point scale). At the same time, the use of the developed method of express color evaluation of flour and pasta samples in Adobe PhotoShop® with the color evaluation system L*a*b*, used in modern reflectometers, allows to obtain data in numerical value and provides high accuracy. In the case of the developed me­thod, correlations were established between the content of carotenoids and the index b* of flour (r = 0.41 / ≤ 0.05) and pasta (r = 0.60 / p ≤ 0.001) and allowed to select the best in flour color selection lines 10-56, 10-65, 14-153, sample T. durum var. falcatomelanopus, in pasta color – lines 10-56, 10-65, 11-29, 12-3.Conclusions. The developed method provides high accuracy and can be used to evaluate the color of pasta and wheat flour, simplifies the evaluation of test samples, standardizes the parameters of agricultural products and avoids subjective judgment. The established weak correlation between the carotenoid content and the b* value of flour indicates the effect on the color of flour not only orange but also yellow and red pigments, and the ave­rage correlation between the carotenoid content and the b* value of pasta indicates the influence of the products of polyphenols oxidation reactions of wheat grain. The best in color flour and pasta lines were selected for breeding work to increase the content of carotenoid pigments in grain.

Purpose. Development of scientific and applied foundations for the introduction, selection and use of plants of the species of the genus Physalis L. to ensure food security in Ukraine.Methods. Subject of study – plants of the genus Physalis. The study was conducted in 2014–2018. on the introduction plots of the department of cultural flora of the M. M. Hryshko National Botanical Garden, NAS of Ukraine (NBG). The work used general scientific and special methods: field, introduction, biological and morphological; laboratory (chemical, biochemical), statistical (methods of analysis of variance and statistical estimation of average data using Microsoft Excel (2010).Results. The features of ontomorphogenesis were established, the biological and morphological parameters of plants of the species of the genus Physalis L. were investigated under conditions of introduction in the Right-Bank Forest-Steppe Ukraine. It was found that the content of dry matter in plant fruits varied from 10 to 18.34%, sugars – from 39.34 to 67.97%, tannins – 1.57 to 3.35% and carotene – from 0.200 to 0.583%, ascorbic acid – from 123.91 to 284.95 mg/100 g, depending on the species, varietal and shape characteristics.Conclusions. It was found that the introduced plant species of the genus Physalis in conditions of culture have four age periods and 10 developmental states: seeds (se), sprouts (p), juvenile (j), immature (im), virginal (v), generative (g), subsenilny (ss) and senile (se). Ph. ixocarpa ‘Likhtaryk’ of the NBG selection was distinguished among the studied introduced species in terms of biological and morphological parameters and biochemical composition. The obtained data can be used for further research and determining the prospects for the introduction of these introduced species into a wide culture

Purpose. Identifying the features of the seasonal growth rhythm, development of the plants, morphological and biological differences in monoecious introduced and domestic varieties of Cannabis sativa L. in the North-east region of Ukraine.Methods. The research was conducted from 2014 till 2019. The following research methods were employed: field (phenological observations, sampling for laboratory analysis), microscopic (study of the morphological structure of glandular and cystolithic hairs on vegetative and generative organs, determination of the size and density of hair formation), laboratory and analytical (determination of the content of cannabinoid substances by thin layer and gas-liquid chromatography), biomorphological me­thods (analysis of morphological characteristics of plants). Chemical analysis for the content of cannabinoid substan­ces was carried out in the laboratory of the breeding and seed production department of the Institute of Bast Crops of the NAAS of Ukraine (Glukhiv, 2014–2019). The content of neutral substances [cannabinol (CBN), cannabidiol (CBD), tetrahydrocannabinol (THC)] and acids (CBDA, THCA) was determined by using a thin layer chromatography (TLC) and gas-liquid chromatography (GLC) methods. For the study, 11 monoecious varieties of C. sativa: ‘YuSO 1’, ‘YuSO 31’, ‘Hliana’, ‘Viktoriia’, ‘Hlesiia’, ‘Hlukhivskyi 46’, ‘Hlukhivski 51’, ‘Zoloto­niski 15’ and 3 introduced varieties: ‘Fedora 17’, ‘Felina 32’, ‘Futura 77’ (France) which differed among themselves in morphological, biological, genetic, ecological-geographical and economically valuable characteristics were selected.Results. Biological and morphological characteristics of modern monoecious varieties of C. sativa were investigated depending on the ecological and geographical zones of origin, conditions of the growing season and the stage of ontogenesis. The functional interdependence between the formation of specialized excretory structures and the content of cannabinoid substances in plants of different varieties of C. sa­tiva  was revealed. The following promising varieties of C. sativa in a ration of ((THC + CBN) ≤ CBD) point the possibility to use them as the source material for creating the medicinal varie­ties of plants with a high content of CBD.Conclusions. Nowadays C. sativa is the main source of phyto material for industrial production of natural CBD. In recent years, high-yielding varieties of C. sativa have been created, which, together with high commercially valuable traits, did not contain psychoactive THC and had an insignificant amount of CBD. The results of the research indicated the features of the seasonal growth rhythm, development of the plants and the morphological and biological features of modern monoecious introduced and domestic varieties of C. sativa in the North-east region of Ukraine. The low correlation between the content of cannabinoid substances and their acids in varieties, which are cha­racterized by the low content of cannabinoid compounds was established. According to the developed own classification (THC + KBN): CBD, varieties with a predominant CBD content ‘Hlukhivskyi 46’, ‘Zolotoniski 15’, ‘Hliana’ which are of significant medicinal value were identified.

Purpose. To determine the efficiency of growing soybean varieties ‘Ustia’, ‘Cordoba’, ‘Estafeta’ depending on the influence of microfertilizers and growth regulators.Methods. Field, laboratory.Results. The article presents the results of studying the efficiency of growing different varieties of soybeans. It was found that in the cultivar ‘Ustia’ the best values of assimilation of photosynthetically active radiation were obtained for the applications of Yara Vita Mono Molitrak in the budding phase (0.25 l/ha) with growth regulator Radostym, and Yara Vita Mono Molitrak in the budding phase (0.25 l/ha) + in the flowering phase (0.25 l/ha) with two studied growth regulators. Similar patterns of the utilization rate of photosynthetic radiation were obtained for the ‘Cordoba’ and ‘Estafeta’ varieties. According to the indicators of the energy balance, the complex use of micronutrient fertilizers and growth regulators in any case pays off with an increase in the yield, which means it is energetically expedient. The maximum coefficients of energy efficiency in the ‘Ustia’, ‘Cordoba’ and ‘Estafeta’ varieties were obtained with the introduction of micronutrient fertilizers Yara Vita Mono Molitrak in the budding phase (0.25 l/ha) + in the flowering phase (0.25 l/ha) and growth regulators Biosyl and Radostym. However, the use of growth regulators separately does not always provide an economic return on investment. In particular, in the variant without Yara Vita Mono Molitrak microfertilizer, the ‘Cordoba’ variety received 28 873 UAH/ha of net profit, while the introduction of growth regulators did not pay off, since there was no significant increase in the yield, and with the use of growth regulators Biosyl and Radostym net profit was within 28824–29179 UAH/ha. In general, the use of micronutrient fertilizer Yara Vita Mono Molitrak with growth regulators Radostim and Biosyl ensu­red guaranteed yield increase.Conclusions. When gro­wing ‘Ustia’, ‘Cordoba’ and ‘Estafeta’ varieties from an energy point of view, it is better to use Yara Vita Mono Molitrak microfertilizer in the budding phase (0.25 l/ha) with the growth regulator Radostym. Under these conditions, the obtained energy efficiency ratio was 3.24; 3.41 and 3.45, and the profit was 31503, 34072 and 34649 UAH/ha, respectively

Purpose. To analyze the divergence of early maturing source material of corn Zea mays L. in heterosis breeding for the genetic base formation at the State Institution the Institute of Grain Crops of the NAAS of Ukraine.Methods. Field (comprehensive assessment of morphobiological and economically valuable characteristics of the source material and maize hybrids) individual selection, cumulative and recurrent selection, backross and testcrosses bree­ding methods; laboratory; analysis and synthesis; statistical.Results. The results of research on the analysis of the divergence of early maturing corn source material in the conditions of the Steppe of Ukraine has become a developed harmonized working collection of corn breeding samples adapted to the stressful conditions of this region. The gradual cyclical improvement of the lines made it possible to form the core of the genetic diversity of FAO 150–290 early maturing specimens of the southern ecotype, which are competitive in heterosis breeding. The complexity of breeding for early maturity in the steppe conditions is due to the lack of material adapted to the stress factors of the South of Ukraine. The available early maturing lines of the world collection F2, F7, Ер1, Ма21, Ма23, Со125, Со255, См7, PLS61, S72, etc., were distinguished by high cold resistance, good starting plant development, intensive accumulation of dry matter during ripening, but not adapted to the deficiency of moisture in the soil and high summer temperatures. According to the results of the experiment, it was revealed that, in terms of breeding, lines of Lancaster plasma (DK427 and DK633) were the most plastic, due to which a number of new mid-early lines were obtained, for example DK2/427, DK267, DK266/417, DK633/266, DK296, etc., which were included in the registered hybrids. Formation of the genetic base of early maturing maize source material for heterosis breeding and systematization accor­ding to different breeding characteristics provided a balance of samples of alternative components, which will be further used to model heterosis hybrids in the early maturing group.Conclusions. The updated basic collection of lines is represented by the samples of plasma Iodent: DK744SVZM, DK216SVZM, DK4173SVZM, DK235zS, DK257zM, SV, DK365SVZM, DK777ZMSV, DK733-7zM,SV, DK315SVZM; Lancaster: DK296zS,VM, DK633/266zS,VM, DK2965ZSZM, DK2953 ZSZM, DK3023 ZSZM, DK236zS,ZM; Raid (SSS): DK232MV, DK2323MV, DK239MV; Mixed: DK253ZSZM, DK273MV, DK272zS, DK281SV, DK233zM,SV, DK959MV, DK9527 ZSZM, DK247MV, DK2442MV, which is the basis of the genetic diversity of early ripening corn samples included in the State register of plant varie­ties suitable for dissemination in Ukraine.

Purpose. Morphological and organoleptic evaluation of oyster mushroom strains for selection of highly productive cultivars assortment with valuable consumer properties for winter and summer cultivation and suitability for sale in fresh or processed form were investigated.Methods. The scheme of the experiment included six strains of oyster mushrooms belonging to two species: Pleurotus ostreatus (5 strains: 2301, Z, 2316, 2456, 431) and P. pulmonarius (2314). Laboratory, laboratory-industrial and statistical methods are used.Results. The dynamics of agrochemical parameters of substrates obtained by the method of aerobic fermentation in the high layer proved their optimality according to the main criteria and compliance to regulatory documentation. The biological efficiency of the strains was in the range of 40–78.9%. The highest weight of clusters was found in the “summer” strain 431 (430.7 g). The highest weight of the fruiting body was determined for the strain 2301 (15.2 g), the lowest – for the 2456 (3.3 g).Conclusions. The values of biological efficiency of strains was determined. The highest average values for the first flush of fruiting had strains 2316 (78.9%) from the “winter” group (A) and 431 (78.4%) from the “summer” group  (B). According to the results of statistical analysis, significant differences were revealed between the studied strains in the main morphological indicators of clusters. It was found that the mass of clusters of «winter» cultivars is much less dependent on the strain type (220.8–273.4 g) than that of «summer» cultivars (83.4–430.7 g). The index of the asymmetry coefficient of the cluster, which can be useful for calculating the required container sizes was proposed. It was determined that the morphological features of fruiting bodies had significant differences in all studied parameters.  In particular, the A group strains differed in size and weight. It was proposed the index of weight loss of the crop coefficient, which shows the ratio between the cap and stipe of the fruiting body and make it possible to predict the amount of mushroom raw material that will be sold in the form of caps, and the amount of raw material that can be processed into minced mushroom, powder and others. The best coefficient was obtained for the fruiting bodies of strain 2314 (0.87), and the worst – for 2456 (0.59), which, accordingly, is not recommended for sale by individual fruiting bodies. It was found that the fruiting bodies of high-yielding strains 2316 and 431 had a number of organoleptic defects.

Purpose. To evaluate Tartary buckwheat variety ‘Kalyna’ according to morphological, productive and quality indicators in the conditions of the Research Center “State Agra­rian and Engineering University in Podilia”. Methods. The studies were carried out in the field crop rotation of the Research Center “Podillia” of the State Agrarian and Engi­neering University in Podilia (SAEU) in 2015–2020. The soil cover of the experimental field is represented mainly by low-humus, weakly leached soils. Experiment setting, material evaluation, analysis of plants, yield and grain quality were carried out in accordance with the generally accepted methods of state variety testing. An assessment of the Tartary buckwheat variety ‘Kalyna’ was carried out in comparison with the common buckwheat variety ‘Victoriia’. Results. The growing season duration of Tartary buckwheat variety ‘Kalyna’ was 87 days (38 days vegetative and 49 days gene­rative). In the studied variety, a larger number of the 1st order branches up to 5.5 pcs was observed. The number of leaves on the plant was 22–28 pcs./plants. In the studied variety, more than 50% of the grains were located on the main stem and the first order branches, while in common buckwheat this indicator was only 30%. Productivity was 2,28 t/ha, the number of grains in inflorescences was 4,4 grains, in common buckwheat – 0,72 t/ha, and 2.2 grains/inflorescence, respectively. The thousand kernel weight in Tartary buckwheat variety ‘Kalyna’ is 10.2 g less than in common buckwheat variety ‘Victoriia’ and is 17.4 g, with hulls – 19.5%, which is 3.2% less then in common buckwheat variety.Assessment of Tartary buckwheat variety ‘Kalyna’ for resistance to the effects of bio- and abiotic factors indicates that it was at the level of common buckwheat variety ‘Victoriia’.In terms of resistance to abiotic factors, ‘Kalyna’ variety is characterized by high resistance to spontaneous fallof grain (5 scores) and has simultaneous grain ripening (5 scores). Conclusions.The morphological and economic-biological indicators of Tartary buckwheat variety ‘Kalyna’ are significantly higher than the common buckwheat varie­ty ‘Victoriia’. It is recommended to grow Tartary buckwheat variety ‘Kalyna’ as a valuable cereal crop in the Western Forest-Steppe zone.

Purpose. Evaluate the introduced samples of soft winter wheat from the international nursery Common Bunt-Resistant Nursery (CBUNT-RES) of different ecological and geographical origin in the southern part of the Forest-Steppe zone of Ukraine according to a set of productivity indicators in order to define the most valuable samples and describe them.Methods. During 2016–2019 on the base of Ustymivka Experimental Station for Plant Production of the V. Ya. Yuriev Plant Production Institute of NAAS the authors studied, evaluated and described 75 new soft winter wheat samples of various eco-geographical origins by productivity traits. In the field and laboratory conditions, indicators of yield and productivi­ty were determined: 1000 grains weight, plant height and ear length, the number of spikelets and grains in the ear, weight of ear and grain and early-ripening.Results. Plant material with increased parameters of economic and biological characters was identified. During studies, it was found that ‘F08347G8’, ‘F00628G34-1’ (Romania), ‘91-142A61/KATIA1//GRISET-4’, ‘SAULESKU#44/TR810200//GRISET-4’, ‘ATTILA/BABAX//PASTOR/4/…’ (IU067591) (Turkey), ‘INTENSIVNAYA//PBW343*2/TUKURU’, ‘SANZAR-8/KKTS’ (Mexico) were the high-yielding varieties. The samples of soft winter wheat as ‘F08347G8’, ‘F00628G34-1’ (Romania), ‘INTENSIVNAYA//PBW343*2/…’ (IU067637) (Mexico), ‘ATAY/GALVEZ87/6/TAST/…’ (IU067587), ‘DE9/MERCAN-2’, ‘KRASNODAR/FRTL/6…’ (IU067595), ‘SAULESKU#44/TR810200//GRISET-4’, ‘GANSU-1/3/AUSGS50AT34/…’ (IU067598), ‘ORKINOS-1*2/3/AUS…’ (IU067608), ‘KAMBARA1/ZANDER-17’ , ‘TAM200/KAUZ/4/CHAM6//…’ (IU067612) (Turkey) contained a large grain weight (more than 5.0 g), plant productivity in these samples was rather high due to increased amount of grains and the thousand kernel weight.Conclusions. The introduced soft winter wheat samples of various eco-geographical origins were adapted to the Southern Forest-Steppe and can be recommended as a source material in breeding to increasing productive capacity.