Refinar búsqueda
Resultados 1-10 de 83
ZIF-8 templated assembly of La3+-anchored ZnO distorted nano-hexagons as an efficient active photocatalyst for the detoxification of rhodamine B in water
2021
Karuppasamy, K. | Rabani, Iqra | Vikraman, Dhanasekaran | Bathula, Chinna | Theerthagiri, J. | Bose, Ranjith | Yim, Chang-Joo | Kathalingam, A. | Seo, Young-Soo | Kim, Hyun-Seok
The use of lanthanum-anchored zinc oxide distorted hexagon (La@ZnO DH) nanoclusters as an active material for the photodegradation of rhodamine B (Rh–B) dye via hydrogen bonding, electrostatic, and π-π interactions is examined herein. The active photocatalyst is derived from porous zeolite imidazole frameworks (ZIF-8) via a combined ultrasonication and calcination process. The distorted hexagon nanocluster morphology with controlled surface area is shown to provide excellent catalytic activity, chemical stability and demarcated pore volume. In addition, the low bandgap (3.57 eV) of La@ZnO DH is shown to expand the degradation of Rh–B under irradiation of UV light as compared to the pristine ZIF-8-derived ZnO photocatalyst due to inhibited recombination of electrons and holes. The outstanding physicochemical stability and enhanced performance of La@ZnO DH could be ascribed to the synergistic interaction among La3+ particles and the ZnO nanoclusters and provide a route for their utilization as a promising catalyst for the detoxification of Rh–B.
Mostrar más [+] Menos [-]Microwave-assisted rapid degradation of DDT using nanohybrids of PANI with SnO2 derived from Psidium Guajava extract
2020
Riaz, Ufana | Zia, Jannatun
The present work reports microwave-assisted synthesis of SnO₂ nanoparticles via green route using Psidium Guajava extract. For the enhancement of catalytic activity, nanohybrids of SnO₂ were formulated using different ratios of polyaniline (PANI) via ultrasound-assisted chemical polymerization. Formation of nanohybrids was confirmed via IR and XPS studies. The UV–vis DRS spectra of PANI/SnO₂ revealed significant reduction in the optical band gap upon nanohybrid formation. Microwave-assisted catalytic efficiency of pure SnO₂, PANI, PANI/SnO₂ nanohybrids was investigated using DDT as a model persistent organic pollutant. The degradation efficiency of PANI/SnO₂ was found to increase with the increase in the loading of PANI. Around 87% of DDT degradation was achieved within a very short period of 12 min under microwave irradiation using PANI/SnO₂-50/50 as catalyst. The effect of DDT concentration was explored and the degradation efficiency of PANI/SnO₂-50/50 catalyst was noticed to be as high as 82% in presence of 100 mg/L of DDT. The effect of microwave power on the degradation efficiency revealed 79% degradation using the same nanohybrid when exposed to microwave irradiation for 5 min under 1110 W microwave power. Scavenging studies confirmed the generation of OH, O₂⁻ radicals. The fragments with m/z values as low as 86 and 70 were confirmed by LCMS analysis. Recyclability tests showed that PANI/SnO₂-50/50 nanohybrid exhibited 81% degradation of DDT (500 mg/L) even after the third cycle, which reflected high catalytic efficiency as well as remarkable stability of the catalyst. This green nanohybrid could therefore be effectively utilized for the rapid degradation of persistent organic pollutants.
Mostrar más [+] Menos [-]Biotoxicity of water-soluble species in PM2.5 using Chlorella
2019
Yang, Liu | Duan, Fengkui | Tian, Hua | He, Kebin | Ma, Yongliang | Ma, Tao | Li, Hui | Yang, Shuo | Zhu, Lidan
China has been faced with severe haze pollution, which is hazardous to human health. Among the air pollutants, PM2.5 (particles with an aerodynamic diameter ≤ 2.5 μm) is the most dangerous because of its toxicity and impact on human health and ecosystems. However, there has been limited research on PM2.5 particle toxicity. In the present study, we collected daily PM2.5 samples from January 1 to March 31, 2018 and selected samples to extract water-soluble species, including SO42−, NO3−, WSOC, and NH4+. These samples represented clean, good, slight, moderate, and heavy pollution days. After extraction using an ultrasonic method, PM2.5 solutions were obtained. We used Chlorella as the test algae and studied the content of chlorophyll a, as well as the variation in fluorescence when they were placed into the PM2.5 extraction solution, and their submicroscopic structure was analyzed using transmission electron microscopy (TEM). The results showed that when the air quality was relatively clean and good (PM2.5 concentration ≤ 75 μg m−3), the PM2.5 extraction solutions had no inhibiting effects on Chlorella, whereas when the air quality was polluted (PM2.5 concentration > 75 μg m−3) and heavily polluted (PM2.5 concentration > 150 μg m−3), with increasing PM2.5 concentrations and exposure time, the chlorophyll a content in Chlorella decreased. Moreover, the maximum photochemical quantum yield (Fv/Fm) of Chlorella obviously decreased, indicating chlorophyll inhibition during polluted days with increasing PM2.5 concentrations. The effects on the chlorophyll fluorescence parameters were also obvious, leading to an increase of energy dissipated per unit reaction center (DIo/RC), suggesting that Chlorella could survive when exposed to PM2.5 solutions, whereas the physiological activities were significantly inhibited. The TEM analysis showed that there were few effects on Chlorella cell microstructure during clean days, whereas plasmolysis occurred during light- and medium-polluted days. With increasing pollution levels, plasmolysis became more and more apparent, until the organelles inside the cells were thoroughly destroyed and most of the parts could not be recognized.
Mostrar más [+] Menos [-]Robust strategies to eliminate endocrine disruptive estrogens in water resources
2022
Vēlāyutan̲, T. A. | Rizwan, Komal | Adeel, Muhammad | Barceló, Damià | Awad, Youssef Ahmed | Iqbal, Hafiz M.N.
The widespread occurrence and ubiquitous distribution of estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) in our water matrices, is an issue of global concern. Public and regulatory authorities are concerned and placing joint efforts to eliminate estrogens and related environmentally hazardous compounds, due to their toxic influences on the environmental matrices, ecology, and human health, even at low concentrations. However, most of the available literature is focused on the occurrence of estrogens in different water environments with limited treatment options. Thus, a detailed review to fully cover the several treatment processes is needed. This review comprehensively and comparatively discusses many physical, chemical, and biological-based treatments to eliminate natural estrogens, i.e., estrone (E1), estradiol (E2), and estriol (E3) and related synthetic estrogens, e.g., 17α-ethinylestradiol (EE2) and other related hazardous compounds. The covered techniques include adsorption, nanofiltration, ultrafiltration, ultrasonication, photocatalysis of estrogenic compounds, Fenton, Fenton-like and photo-Fenton degradation of estrogenic compounds, electro-Fenton degradation of estrogenic compounds, ozonation, and biological methods for the removal of estrogenic compounds are thoroughly discussed with suitable examples. The studies revealed that treatment plants based on chemical and biological approaches are cost-friendly for removing estrogenic pollutants. Further, there is a need to properly monitor and disposal of the usage of estrogenic drugs in humans and animals. Additional studies are required to explore a robust and more advanced oxidation treatment strategy that can contribute effectively to industrial-scale applications. This review may assist future investigations, monitoring, and removing estrogenic compounds from various environmental matrices. In concluding remarks, a way forward and future perspectives focusing on bridging knowledge gaps in estrogenic compounds removal are also proposed.
Mostrar más [+] Menos [-]Remediation of contaminated sediments containing both organic and inorganic chemicals using ultrasound and ozone nanobubbles
2021
Most river sediments are contaminated with organic and inorganic pollutants and cause significant environmental damage and health risks. This research is evaluated an in-situ sediment remediation method using ultrasound and ozone nanobubbles to remove organic and inorganic chemicals in contaminated sediments. Contaminated sediment is prepared by mixing synthetic fine sediment with an organic (p-terphenyl) and an inorganic chemical (chromium). The prepared contaminated sediment is treated with ultrasound and ozone nanobubbles under different operating conditions. For the samples with the maximum initial concentration of 4211 mg/kg Cr and 1875 mg/kg p-terphenyl, average removal efficiencies are 71% and 60%, respectively, with 240 min of sonication with 2-min pulses, whereas 97.5% and 91.5% removal efficiencies are obtained for the same, respectively, as a single contaminant in the sediment. For the same maximum concentrations, the highest removal of p-terphenyl is 82.7% with 127.2 J/ml high energy density, and for Cr, it is 77.1% using the highest number of the treatment cycle and ozone usage with 78.75/ml energy density. The Cr highest removal efficiency of 87.2% is recorded with the reduced initial concentration of 1227 mg/kg with the highest treatment cycles. The Cr removal efficiency depends on the availability of oxidizing agents and the number of washing cycles of sediments, whereas P-terphenyl degradation is most likely influenced by the combined effects of oxidation and ultrasound-assisted pyrolysis and combustion of organics.
Mostrar más [+] Menos [-]Eco-friendly synthesis of lignin mediated silver nanoparticles as a selective sensor and their catalytic removal of aromatic toxic nitro compounds
2021
Lee, Seung Jun | Begildayeva, Talshyn | Yeon, Sanghun | Naik, Shreyanka Shankar | Ryu, Hakseung | Kim, Tae Ho | Choi, Myong Yong
The development of an eco-friendly and reliable process for the production of nanomaterials is essential to overcome the toxicity and exorbitant cost of conventional methods. As such, a facile and green synthesis method is introduced for the preparation of lignin mediated silver nanoparticles (L-Ag NPs). This is produced by reducing Ag precursors using lignin biopolymers which are formulated by pulsed laser irradiation and an ultrasonication process. Lignin operates as both a reducing and stabilizing agent. The various analytical techniques of ultraviolet–visible spectroscopy, transmission electron microscope and X-ray diffractometer studies were employed to verify the formation of non-aggregated spherical L-Ag NPs with an average size as small as 7–8 nm. The selective sensing capability of the synthesized L-Ag NPs was examined for the detection of hydrogen peroxide and mercury ions in an aqueous environment. Furthermore, the superior catalytic performance of L-Ag NPs was demonstrated by the rapid conversion of toxic 4-nitrophenol and nitrobenzene as targeted pollutants to the corresponding amino compounds. A plausible catalytic reduction mechanism for the removal of toxic nitro-organic pollutants over L-Ag NPs is proposed. This research coincides with existing studies and affirms that L-Ag NPs are an effective sensor that be applied as a catalytic material within environmental remediation and also alternative biomedical applications.
Mostrar más [+] Menos [-]Comprehensive chemical characterization of indoor dust by target, suspect screening and nontarget analysis using LC-HRMS and GC-HRMS
2021
Dubocq, Florian | Kärrman, Anna | Gustavsson, Jakob | Wang, Thanh
Since humans spend more than 90% of their time in indoor environments, indoor exposure can be an important non-dietary pathway to hazardous organic contaminants. It is thus important to characterize the chemical composition of indoor dust to assess the total contaminant exposure and estimate human health risks. The aim of this investigation was to perform a comprehensive chemical characterization of indoor dust. First, the robustness of an adopted extraction method using ultrasonication was evaluated for 85 target compounds. Thereafter, a workflow combining target analysis, suspect screening analysis (SSA) and nontarget analysis (NTA) was applied to dust samples from different indoor environments. Chemical analysis was performed using both gas chromatography and liquid chromatography coupled with high resolution mass spectrometry. Although suppressing matrix effects were prominent, target analysis enabled the quantification of organophosphate/brominated flame retardants (OPFRs/BFRs), liquid crystal monomers (LCMs), toluene diisocyanate, bisphenols, pesticides and tributyl citrate. The SSA confirmed the presence of OPFRs but also enabled the detection of polyethylene glycols (PEGs) and phthalates/parabens. The combination of hierarchical cluster analysis and scaled mass defect plots in the NTA workflow confirmed the presence of the above mentioned compounds, as well as detect other contaminants such as tetrabromobisphenol A, triclocarban, diclofenac and 3,5,6-trichloro-2-pyridinol, which were further confirmed using pure standards.
Mostrar más [+] Menos [-]Algae-induced photodegradation of antibiotics: A review
2021
Wei, Lianxue | Li, Haixiao | Lü, Jinfeng
Antibiotics are a typical group of pharmaceutical and personal care products (PPCPs) with emerging pollutant effects. The presence of residual antibiotics in the environment is a prominent issue owing to their potential hazards, toxic effects, and persistence. Several treatments have been carried out in aquatic environments in order to eliminate antibiotic residues. Among these, photodegradation is regarded as an environmentally-friendly and efficient option. Indirect photodegradation is the main pathway for the degradation of residual antibiotics in natural water, as opposed to direct photodegradation. Algae, working as photosensitizers, play an important role in the indirect photolysis of residual antibiotics in natural water bodies. They promote this reaction by secreting extracellular organic matters (EOMs) and inducing the generation of active species. In order to provide a thorough understanding of the effects of algae on residual antibiotic degradation in the environment, this paper comprehensively reviews the latest research regarding algae-induced antibiotic photodegradation. The summary of the different pathways and photosensitive mechanisms involved in this process show that EOMs are indispensable to antibiotic photodegradation. The influencing factors of algae-induced photodegradation are also discussed here: these include algae species, antibiotic types, and environmental variables such as light source, ferric ion presence, temperature, and ultrasound treatment. Based on the review of existing literature, this paper also considers several pathways for the future study of algae-induced antibiotic photodegradation.
Mostrar más [+] Menos [-]Immobilizing 1–3 nm Ag nanoparticles in reduced graphene oxide aerogel as a high-effective catalyst for reduction of nitroaromatic compounds
2020
Shen, Yi | Zhu, Chao | Chen, Baoliang
To improve catalytic performance and stability of Ag nanoparticles (Ag NPs), a facile ultrasonication-assisted chemical reduction method was developed to fabricate reduced graphene oxide (rGO) aerogels loaded with 1–3 nm Ag NPs under the normal temperature and pressure. The ultrasonication facilitated the dispersion of Ag(I) in the form of silver ammonia and anchored onto GO nanosheets. Ag(I) and GO were simultaneously reduced to Ag(0) immobilizing onto 3D rGO hydrogels within the heterogeneous liquid phase, and ultimately formed 3D rGO-Ag NPs aerogels. The 3D rGO-Ag NPs aerogels displayed superb catalytic performance for the reduction of nitrobenzene (NB), 1,3-dinitrobenzene (DNB) and 4-nitrophenol (NP) into aniline, 1,3-diaminobenzene and 4-aminophenol, respectively. The individual reduction rate Kobs for NB, DNB and NP were 0.168 h−1, 0.109 h−1 and 0.092 h−1, which were much higher than those of other Ag NPs-based materials. Moreover, the immobilization of 1–3 nm Ag NPs in 3D rGO-Ag NPs was stable during the whole reduction reaction without aggregation and leaching. The high stability of Ag NPs in 3D rGO-Ag NPs and superb performance on catalytic reduction of nitroaromatic compounds (NACs) could be concluded into ultrasonication influence in the preparation procedure and synergistic effect of Ag NPs and 3D rGO in the catalytic reduction process. The simple ultrasonication-assisted chemical reduction approach provided a scaled-up application prospect in catalytic reduction of NACs by metal nanoparticle catalysts.
Mostrar más [+] Menos [-]Simple quantification method for N-nitrosamines in atmospheric particulates based on facile pretreatment and GC-MS/MS
2017
Hong, Youngmin | Kim, Kyung-Hwan | Sang, Byoung-In | Kim, Hyunook
Nine N-nitrosamines (i.e., N-nitrosomethylamine, N-nitrosodiethylamine (NDEA), N-nitrosodimethylamine (NDMA), N-nitrosodi-n-propylamine (NDPA), N-nitrosomorpholine (NMor), N-nitrosopyrrolidine (NPyr), N-nitrosopiperidine (NPip), N-nitorosodi-n-butylamine (NDBA), and N-nitrosodiphenylamine (NDPhA) in atmospheric PM2.5 collected in the fall season from an roadside site and a residential in Seoul, Korea have been analyzed using a newly developed method consisting of simple direct liquid extraction assisted by ultrasonication and subsequent quantification using a gas chromatography-triple quadrupole mass spectrometry (GC-TQMS). Excellent recovery values (92–100%) and method detection limits for the target compounds atmospheric PM samples could be achieved even without an evaporation step for sample concentration. The concentration of total N-nitrosamines in PM2.5 was ranged from 0.3 to 9.4 ng m−3 in this study; NDMA, NDEA, NDBA, NPyr, and NMor in PM2.5 were found to be the most frequently encountered compounds at the sampling sites. Since no industrial plant is located in Seoul, vehicle exhausts were considered major cause of the formation of nitrosamines in this study. The mechanisms how these compounds are formed and detected in the atmosphere are explained from the viewpoint of secondary organic aerosol. Considering the concentrations of N-nitrosamines and their associated potential health risks, a systematic monitoring of nitrosamines present in both ambient air and PM2.5 including seasonal and diurnal variations of selected sites (including potential precursor sources) should be carried out in the future. The proposed sample pretreatment method along with the analytical method will definitely help us perform the monitoring study.
Mostrar más [+] Menos [-]