The study was conducted within the Protected Area of the Tumauini Watershed Natural Park located in the municipality of Tumauini province of Isabela along the western part of the Northern Sierra Madre Natural Park. The protected areas in the Philippines cover 39% of the total forest cover. Protection and conservation of protected areas is significant due to the increasing habitat loss and biodiversity loss. The main objective of the study is to assess the tree diversity of the park using the modified belt-transect method adopted by the Department of Environment and Natural Resources (DENR). The transect line has a distance of 2 kilometers and a total of 9 stations. A Nested Quadrat was established along the transect line for tree identification. Results of the assessment show that the park has a species richness of 34 tree species in eight families and 26 genera. Species diversity indicates low (2.4) to very low (1.12) based on the Shannon-Weiner Diversity Index despite the high number of individuals found in the watershed area. The low diversity of the watershed is affected by the rampant anthropogenic activities and naturally-induced hazards occurring in the protected area. Shorea polysmerma is the most dominant and the most important species, with an Importance Value index of 38.78. Three species of trees were recorded as generalists in the area such as Calophyllum blancoi, Shorea palosapis, and Ficus sp.

Improper disposal of solid waste obstructs drainage systems and pollutes surface water. Additionally, the dumping of unsorted garbage generates emissions and leachate, which harm local ecosystems and contribute to climate change. With Rewari City’s growing population, effective municipal solid waste management, including landfill site selection, is crucial. This study employs Geographic Information System (GIS), Analytical Hierarchical Process (AHP), and Weighted Linear Combination (WLC) methodologies to determine appropriate sites for landfills. The FAO, ALOS PALSAR DEM, Sentinel 2B images, Google Earth Pro, and interviews were employed to gather data. The results of the Analytic Hierarchy Process (AHP) indicate that 35.4% of the parameters under consideration are associated with Land Use Land Cover (LULC), whereas roads rank as the second most significant criterion, accounting for 24.0%. The WLC technique determined that 4.65 square kilometers were inappropriate for dump sites, while 0.11 square kilometers were extremely favorable. These findings can assist decision-makers in determining the order of importance for variables when selecting a landfill location.

Noble metal decorated metal oxide composites have proved to have Surface plasmon resonance (SPR) as a notable approach for efficient light absorption. Herein present work, a new sonochemical method is proposed for in-situ synthesis of noble metal-based CeO2 composites for the sonophotocatalytic degradation of commercial Acephate solution. Pristine CeO2 and Ag@CeO2 with different Ag contents viz. 4, 6 and 8 wt. % were successfully synthesized by a facile in-situ sonochemical approach. The as-synthesized CeO2 and Ag@CeO2 nanocomposites were characterized by various physicochemical characterization techniques, including XRD, FTIR, UV-Vis spectroscopy, BET, and FESEM-EDS. Further, these CeO2 and Ag@CeO2 nanocomposites were employed for photocatalytic, sonocatalytic, and sonophotocatalytic degradation of commercial Acephate solution. Experimental results revealed that the photocatalytic and sonocatalytic processes follow a pseudo-first-order model, whereas the sonophotocatalytic process had a more substantial rate constant compared to the photocatalytic and sonocatalytic one. Further, the kinetics of the study were examined by the Langmuir-Hinshelwood model. Overall, the sonophotocatalytic degradation involving as-synthesized Ag@CeO2 with 6 wt. % Ag content has shown to be the most effective method for the effective degradation of a commercial acephate solution.

Recently, Extended Producer Responsibility (EPR) schemes have been considered as potential policies for solid waste management and many countries have applied them. Researchers, authorities, and producers need a comprehensive and up-to-date understanding of EPR. Therefore, this literature review aims to review the current research status of EPR implementation on packaging, to highlight actual experiences conducting EPR, and to find research gaps. Results indicate that during the last 5 years, there has been an increase in the amount of research on EPR in packaging and that packaging waste recycling under this scheme is the most considered activity. Additionally, the primary metrics used to assess the efficacy of EPRs are recycling and reducing packaging waste. According to the lessons learned, applying EPR to packaging should take stakeholder engagement, policy design, transparency, and incentive strategy into account. Additionally, knowing the economic effectiveness problems small- and medium-sized packaging companies face, the effectiveness of EPR methods on various materials and geographical areas, and the efficacy of monitoring methods are the main areas that need to be researched.

A major global concern is the widespread environmental destruction caused by hydrocarbons, especially from the dumping of spent engine oil. Hydrocarbons are a major source of pollution in the environment and have an impact on agriculture, aquatic life, and soil fertility. The necessity of resolving this issue is highlighted by the detrimental impact on soil biocenosis and the potential conversion of soils into technogenic deserts. Due to high costs and polluting byproducts, the conventional approach of treating contaminated soil, sediment, and water is unsustainable. However, bioremediation, which makes use of biological agents like fungi and bacteria, appears to be a more practical and affordable solution. Microbial biosurfactants present a possible solution for environmental restoration due to their less harmful nature compared to chemical surfactants. This review highlights the green and sustainable nature of microbial biosurfactants while examining their advancements, biotechnological potentials, and future possibilities for bioremediation. The review also looks at the genetic basis and economic viability of biosurfactants for bioremediation applications. Furthermore, the review emphasizes the need for more studies in overcoming the challenges of large-scale application of biological surfactants for bioremediation of pollution and environmental restoration. As partners in nature, these bacteria aid in the breakdown of hydrocarbons, highlighting the need for industry and the environment to coexist sustainably. As biosurfactants are less harmful to the environment than chemical surfactants, they are more in line with the global trend toward sustainable methods and the use of natural processes for ecological restoration.

Improper disposal of landfill leachate, a highly polluted wastewater, can harm living beings and the ecosystem. Of all the treatment technologies available, electrochemical techniques have the most advantages in terms of ease of use, affordability, and the ability to degrade various contaminants found in landfill leachate effectively. Though there are a sufficient number of research articles regarding the electrochemical treatment of leachate, it has many research gaps, such as a study on the mechanism of radicle generation, pollutant degradation, study on different electrodes with various pollutants concentrations, application of green catalysts, byproduct formation assessment, energy recovery, etc. This review article explores the applications of electrooxidation techniques for the treatment of landfill leachate. Key aspects discussed include the (i) fundamental concepts in electrochemical treatment and its mechanism, (ii) factors affecting the electrochemical treatment efficiency, (iii) the applicability of leachate treatment with different electrochemical methods, (iv) recent advances, (v) merits, and demerits and (vi) proposal of future scope and the studies needed. The integration of electrooxidation with other treatment processes and the challenges hindering widespread adoption are also addressed. Overall, electrooxidation demonstrates promise as an effective and sustainable method for managing landfill leachate. Consequently, this article directs chacurrent and future research efforts toward optimizing the leachate treatment through electrooxidation techniques.

Heavy metal (HM) pollution has been a significant issue for the environment and public health. Unmonitored industrial effluents are a major source of HM pollution. However, metallotolerant bacteria thriving in such environments could be potentially useful for bioremediation purposes. In this study, Bacillus cereus IEI-01 was isolated from water samples of Badshahpur Lake, Gurugram, showcasing resilience to HM exposure and thriving under optimal conditions at 37°C and pH 7.0. Morphological and biochemical characterization showed its Gram-positive rod shape and metabolic versatility, including glucose fermentation and nitrate reduction capabilities. Molecular analysis further affirmed its close relation to the Bacillus cereus strain. Dynamic bacterial growth patterns were observed, with typical sigmoidal curves indicating significant growth over 72 h. When exposed to various HMs, the strain IEI-01 exhibited differential tolerance and promoting patterns, with cadmium (Cd) and lead (Pb) compared to other metals. Over 72 h, the strain exhibited substantial removal rates ranging from 60.64% to 87.43% for Cd and 41.87% to 52.62% for Pb. The concentration-dependent bio-removal efficiency of IEI-01 in Cd-spiked cultures displayed a declining trend with increasing concentrations, with removal rates ranging from 80.23% to 60.72% over the same period. These findings highlight the potential of Bacillus cereus IEI-01 for HM bioremediation, particularly at lower concentrations. Its efficacy in removing Cd and Pb from contaminated environments suggests promising applications in environmental cleanup efforts.

Microplastic pollution has become a global concern with potentially severe environmental and health implications. This research explores the level of knowledge and awareness about microplastics among the urban population of Pune, a busy city in India. A mixed-methods approach was employed using a sequential explanatory design. In the first phase, qualitative data were gathered through semi-structured interviews with 18 participants selected via purposive sampling. In the second phase, quantitative data were collected from 100 participants using a survey and convenience sampling. By combining insights from surveys, interviews, and existing literature, the study analyzed the extent to which residents of Pune are informed about microplastic pollution and their willingness to take action. The findings highlight the need for increased awareness campaigns and educational initiatives to address the growing microplastic problem in urban areas. The study concludes that plastics have become an integral part of our lives, necessitating robust mechanisms to eliminate them from daily use.

The objective of the current research is to measure the specific activity of 40K and heavy metals in the water samples collected from the Al-Diwaniyah River in Al-Qadisiyah Governorate, Iraq. The activity of 40K in water samples was ascertained using High Purity Germanium Spectrometer (HPGe) detector technology, which is based on a high-resolution gamma spectrometry system, and by using an atomic absorption spectrometer (A.A.S.) to determine the heavy metals of Ni, Cd and Pb, as well as measure some of the physical properties of water samples. The results indicated the concentration of 40K in the water was presented in different concentrations. The lowest value was 2.6±0.5 Bq/L Al-Muhanawiyah, while the highest value was in Al-Diwaniyah center 24.6± 4.0Bq/L. On the other hand, the highest results of Pb, Cd and Ni have been 0.1247, 0.0652 and 0.157 ppm, respectively. While, the results of physics properties were from 7.05 to 8.3 for total dissolved solids (T.D.S.) values were from 2100 to 756.6 mg/L, electrical conductivity values were between 1140 and 3500 μs/cm, and turbidity values were between 7.0 and 54.5. Based on the results, the concentrations of the 40K and heavy metals indicated that the results are almost slight compared to internationally accepted values.

The present paper reports the results of experimental investigations performed to examine the feasibility of using fly ash (FA) and ground-granulated blast furnace slag (GGBS) geopolymers as barrier materials for waste containment facilities. The alkaline geopolymer is a blend of FA and GGBS with sodium hydroxide in concentrations varying from 1 to 5. The important properties of most barrier materials include strength and hydraulic conductivity. While FA can develop compressive strength through pozzolanic reactions, polymerized FA develops tensile strength. For the construction of barriers for landfills with higher heights, tensile strength assumes importance. To further improve the strength, FA can be amended with GGBS. Results indicate that the FA-GGBS mixture in the ratio of 40:60, when cured, exhibited higher strength at any molar concentration. Further, the hydraulic conductivity of the material, which is predominant for barriers in waste containment facilities, is studied. To examine the impact of the presence of heavy metals in the leachates, batch adsorption studies were executed on a 40% FA- 60% GGBS mixture. Leachate with nickel and lead were adapted for their retention within the barrier. It has been observed that the geopolymerized FA and GGBS can retain ionic metals. The retention capacity of heavy metals is due to their precipitation in the voids of the barrier material enabling further reduction in the hydraulic conductivity making geopolymer a sustainable barrier material.