Tree roots take up a high proportion of forest biomass, and nowadays we use different methods to estimate the root biomass. Methods vary greatly due to the different studies and different excavation methods used. In the summer 2010, a study of the below-ground biomass of young Scots pine Pinus sylvestris L. stands was carried out in central Latvia. In this paper, different below-ground biomass fractions data of 10 sample trees from the abandoned agricultural land plantations were approximated by allometric functions depending on tree stem diameter at breast height 1.3 m (DBH). The main objective was to determine the average below-ground biomass and approximated below-ground biomass fractions by allometric functions depending on tree DBH of young stands of Scots pine on abandoned agricultural land. Our regressions offer good overall approximations of the data. DBH – stump, coarse root and small root and total biomass regressions were highly significant (p is less than 0.001). The most substantial part of total below-ground biomass was from stumps (45%). The smallest shares of the biomass were coarse roots 38% and small roots 16%. The largest portion (52%) of the total fine-root biomass of 12- and 14-year-old Scots pine stands was located at a depth of 0–10 cm, decreasing in deeper mineral soil layers. Total dry (DM) below-ground biomass including fine-root biomass was 19.0 ±5.2 t DM ha-E1.

With the increase in demand for renewable energy resources, new studies are carried out about under - utilized resources, namely, stumps. To begin to use stumps in industrial application, it is necessary to find out stump extraction influence on the environment, biodiversity, forest regeneration and other important factors. In Zemgale forestry, Misas and Klīves forest districts managed by Joint stock company “Latvian State Forests” (LSF) study on stump extraction in woodlands where clear-cuttings done in 2006 was carried out in the block No. 177, compartments No. 1 and 5, as well as the block No. 176, compartments No. 3 and 9. In these territories two research objects were made where in November-December 2007 stump extraction as well as soil preparation were performed. Main tasks of the project were to evaluate the results of forest natural seeding and coppice ingrowths in natural regeneration areas and evaluate the use of different methods for artificial reforestation with spruce and pine containerized seedlings. It was observed that more seedlings were cut off in the areas where soil scarification with stump extractor was performed if compared to areas prepared with a disc trencher.

The added value of woodworks is determined by the surface quality because it is the first one seen and evaluated by the client. In the production process it is quite problematic to evaluate woodworks surface quality because of large production capacity, and the processed material can be instrumentally tested with a definite time shift. In production most frequently the surface quality is evaluated visually, which is not quite precise. At the same time during the mechanical processing of wood noise is caused by cutting tools as they gradually wear out. The same reasons influence the increase of noise and the quality of woodwork surface. The essence of the problem is to analyze the registered increase of the noise level at a definite workplace and simultaneously follow the surface quality of the processed material – roughness and wear-out of the cutting instrument. The objective of the paper is to research the method of the noise level data collecting and application in order to evaluate wooden product surface quality during wood processing by milling machines. It would provide an opportunity to update the management processes of massive woodworks, supervise the surface quality of woodworks, reduce costs and increase the added value.

The Duration of Load (DOL) effect is the combined influence of the mechanical loading history and climatic history on the strength of materials. DOL effect is one of the most important characteristics of wood and wood-based materials. The material degradation or damage induces strength reductions. Creep is one of the most important effects of DOL. Creep is a phenomenon that negatively affects functional compliance, behaviour and strength of timber structures in extended years of exploitation. The creep phenomenon is affected by surrounding temperature, relative humidity, timber moisture content and other factors. The study aimed to establish a correct factor system for accurate prediction of long-term deformations of timber structures that is corresponding to environmental conditions and timber properties in the region of Latvia. The experimental research was made in Jelgava, Latvia, and represents timber beam four-point long-term loading in bending with variable cross section height-span length ratio under uncontrolled climatic conditions. There were 12 timber beams with two different span lengths – 1.32 m and 1.50 m used. The timber beam cross section dimensions: height – 60 mm, width – 30 mm. The timber beams were not dried and the moisture content at the start of the experiment varied from 19% to 33%. The applied load values – 0.40 kN and 0.31 kN. Moisture content fluctuations and negative air temperature accelerated creep development and intensity. Prediction of final long-term deformations should rate not only the type of timber material and service class but the strength class, too.

Churchyard of Latgale Upland is one of the most important parts of cultural historic space of Latvia. The study is based on the materials from expedition made in summer and autumn 2011, as well as on literary studies. Architecturally compositional form of the church is a key part of the landscape, supplemented by other landscape elements. Research and evaluation of the individual elements give specific cultural space characteristics of each investigated area. Visibility in the main view points and links with residential buildings for the churchyard is vital. Each study of landscape area schemes formation is based not only on the church as a domination point expression. Separate churchyard elements - crucifixes, procession paths, burial area, meditation area and a planting in church gardens - are important in describing churchyards. The aim of the research was to find most common elements in churchyards to establish general guidelines for recording and evaluation of the churchyard in Latgale Upland in future. In perspective that could be used as basis for making the landscape typology. Results showed typical landscape elements in the churchyard. In describing churchyards is important to divide typical and unique elements. The research provides information that is important for the further local territorial development plans, focusing attention on the region’s cultural values and identity preservation.

Nowadays, linkage of landscape ecology with landscape aesthetics becomes very topical, especially when people move from rural areas to big towns and cities. Landscape ecological planning becomes more important in terms of sustainable environment. Landscape assessment and investigation needs a multidisciplinary approach. The aim of the study was to evaluate landscape ecological aesthetics in urban area. The selected city for study was Jelgava – city with a special characteristic landscape of Zemgale plains and wide green spaces in the city centre. Jelgava is one of the examples of complex urban system with ecological environment. This research presents landscape evaluation of Jelgava using ecological aesthetics assessment method. Territory of Jelgava was divided in groups of research areas: green spaces, residential areas and other territories. Qualitative and quantitative methods were used in the research. The methods applied in this research describe the present situation of the city. Landscape inventory, biotope structure analysis and evaluation of landscape ecological aesthetical qualities give a general overview of the problems and opportunities of the examined city. Research study was managed in autumn and winter 2011. The results show the need for sorting the cityscape and use of ecological principles in further urban planning. Green areas of Jelgava are ecological and aesthetical valuable but multi-storey residential areas have low quality of landscape ecological aesthetics.

The article is devoted to the analysis of historical, cultural, and architectural importance of Miklouho-Maclay park, a monument of landscape art. It examines the archive data about the family of the famous traveler, ethnographer, anthropologist Mykola Mykolayovych Miklouho-Maclay who lived in Malyn (Zhitomir district Ukraine) at the end of XIX and the beginning of XX century, his contribution to the development of landscape art. It is shown that the park contains 57 species of arboreal-shrub plants including 34 species of trees, 22 shrubs, and one shrubbу liana. 23 of them (40%) are introduced species. The author offers the direction of parkland reconstruction and points out recommendations on territory zoning.

Since discovering that signals of random waves submit to the known laws of probability, this became widely used in engineering and energetics for probability distributions analysis of wave height. From an energetic point of view, it is necessary to know the average wave height in, for example, highly wavy (1% probability), medium wavy (25% probability) or non-wavy (95% probability) years. Whereas, maximum multi-year value of wave height characteristics is essential for engineering resistant wave energy converters that could withstand severe marine conditions. Average and maximum annual values of wave height data collected from Klaipėda coastal hydrometeorological station are used for this study. Probability distributions of average and maximum wave heights in the Lithuanian coast are analyzed in this paper. The best fitting is obtained using HYFRAN and EASY FIT software. Both, a test for independence (Wald- Wolfowitz) and stationarity test (Kendall) are carried out for every time series using HYFRAN software. Maximum like hood method is selected for distribution estimation. Fitting is determined using chi-square test and the best fitting is verified with comparison (BIC and AIC) criterion. Fitting for one of the most commonly used distributions in the analysis of wave climate – Rayleigh distribution – cannot be determined with HYFRAN software. For this purpose, EASY FIT software is used additionally. The fit of the distribution is evaluated via the chi-square test similarly. Calculated wave heights based on lognormal probability distribution that fits best according to HYFRAN software are similar to those calculated using Rayleigh probability distribution.

Hydro-physical properties of heavy or presses soil as well as water regime may be improved by various ways, taking into account the texture of soil and climatic conditions. Drainage is the tool for productive farming and economic benefit generation. Hydrological activity of drainage typically depends on project installation quality, anthropogenic and climatic factors. It is important to assess drainage activity under different meteorological conditions. One of methods to improve drainage performance is its installation with thickened humus layer. Lithuanian soil humus layer is close to arable layer and is equal to approximately 20–25 cm. The impact of humus on heavy-textured soil is multiple, since not only moisture regimes, biological activity, sorption capacity, chemical and biological characteristics, stability of plant nutrition are related with its quantity. The dynamics of drainage activity in soil with thickened (up to 40–50 cm) humus layer and with humus layer of natural thickness (20–30 cm) during various seasons of period of 1989–2009 is reviewed. Especially important indicator of drainage functioning – water runoff dynamics. The present article analyses the variation of climatic conditions and drainage runoff in the object. It is determined that the lowest quantity of precipitation in the researched territory during the research period is in spring and winter but the highest – in summer and autumn. During the research period the highest drainage runoff in the field I was during winter season (46.3%), in the field II – in winter and spring almost the same (32–33%).

Sewage sludge is a specific bulky waste and its utilization is hampered by the presence of the environmentally dangerous contaminated substances in the composition presented mainly by heavy metals, pathogens and coagulants. At the same time sewage sludge may serve as a valuable biological raw material. Utilization of the sewage sludge is crucial environmental and economic challenge. Application of the pneumatic pulse method in the technology of dehydration and utilization of the sewage sludge may allow us to speed up the process of drying, reduce power consumption and capital investment, execute process of dehydration at lower temperatures and in less hazardous explosive conditions. Proposed solution is founded on the use of the compact equipment for dehydration and utilization, including pneumatic pulse drying method. For this purpose the pulser – an airflow feeder with required time intervals or pulses, was included in the technological process. In the process of the drying sewage sludge with the use of pneumatic pulse, there is no need to spend all the energy on evaporation of the water molecules and this fact significantly reduces power consumption. Preliminary calculations, taking into account laboratory data, showed that proposed technology of drying sewage sludge allows to reduce power consumption by 25% upon receipt of the dry sludge. The aim of the study is development of sewage sludge dehydration technology for further utilization of design solutions using the pulse method.