Organic farmers need varieties adapted to variable growing conditions, because in organic farms environmental conditions significantly vary in soil nutrient status, weed and disease pressure not only between years, but also among farms within a season. Modern varieties developed under high input agricultural systems do not always perform well under organic growing conditions. Therefore, farmers need such varieties of cereals that can adapt to variable growing conditions and maintain productivity. One of the ways to promote adaptation to environment is growing of variety mixtures. Field trials were conducted during 2014 – 2016 under organic and conventional farming systems in two locations with an aim to estimate the advantages of barley mixtures in respect of yield and its stability. The trial consisted of eight mixtures of barley varieties and breeding lines, components of mixtures in pure stand and three check varieties. The mixtures were combined by using two, three and five components. Three mixtures, each in one out of 11 environments significantly out–yielded, but one mixture had significantly lower yield than the average value of their components. Some mixtures showed a tendency to out–yield the average of components in both farming systems. All mixtures insignificantly out–yielded check varieties in 2015, but in 2016, yield was within the range between varieties with lowest and highest yield. The results of yield stability analysis showed that mixtures could be used as one of the approaches to stabilize yield – only one of eight mixtures had a lower yield than the average over all environments.

The agronomic role of legumes in cropping systems is well understood with the respect to N2 fixation, mechanisms of precrop effects, and environmental impacts. The combined inoculation and tripartite symbiosis between leguminous plants, Rhizobium spp. and vesicular-arbuscular mycorrhizal fungi has been the subject of intensive research. Less attention has been paid to their effects on subsequent crops. Pot experiments were carried out in the greenhouse of Latvia University of Agriculture in 2015 and 2016. Soil used for this experiment was taken from the previous trial, where broad beans (Vicia faba var. major Harz.) were grown. Bean seeds, depending on the variant, were inoculated with rhizobia bacteria or mycorrhiza fungi, or the mixture of both microorganisms. Onions were grown as a subsequent crop. During the experiment, fresh and dry weight of onion leaves was determined. Onion root mycorrhizal colonization frequency and arbuscule abundance in the onion root system were determined. The activity of soil microorganisms was determined by soil respiration intensity. Results showed that the use of microsymbionts increased the subsequent onion leaf harvest in 2014 by 2.3% and in 2015 by 9.5%. In 2015 the highest increase of onion leaf yield was detected in variants were rhizobia strain RP023 was used. Rhizobia strain RV407 gave a positive effect only in combination with mycorrhiza fungi. Precrop treatment with mineral nitrogen fertilizer increased the onion yield in both years – by 12.4 and 14.3%, respectively. In all treatments, a decrease in dry matter content was observed. The highest incidence of mycorrhiza fungi structures was detected under mycorrhiza treatment. Tripartite symbiosis promoted the soil respiration rate.

Cattle fattening, first of all, should be beneficial for a farmer, therefore, in Latvia more suitable are such average intense fattening methods as fattening with grass fodder. In the world, demand for beef, produced in an environmentally friendly manner, ensuring the appropriate animal welfare conditions, is growing. The aim of the study was to find out the fattening results of Hereford (HE) and Aberdinanguss (AB) pure-bred bulls and their crosses when fed with grass fodder. The study was conducted in 2015 and 2016 within the framework of the project ‘Baltic Grassland Beef’. AB crossbreed bulls were slaughtered when they were 519 ± 16.6 days old, but HE pure-bred bulls − 584 ± 7.3 days old (p ≤ 0.05). The biggest live weight and slaughter weight showed HE crossbreed group bulls – 557 ± 19.4 kg and 293 ± 12.2 kg, respectively, but the biggest live weight daily gain from birth to slaughter was observed to AB pure–bred group bulls – 952 ± 24.7. Carcass conformation score in muscle development was the highest for AB pure–bred group bulls. Their average conformation score was 3.2 ± 0.08 points. In terms of fat score development, carcass with the best quality was obtained from HE crossbreed group bulls, the resulting fat score – 2.4 ± 0.10. The obtained results prove that pure-bred and crossbreed bulls used in this research are suitable for fattening with grass in the conditions of Latvia

The aim of our study was to determine up to what extent the number of services per calving (NSPC) affects dairy cow productive and reproductive performance. The study contains data from the Agricultural Data Centre of Latvia about 26888 Latvian Brown (LB) and Holstein Black and White (HBW) breed cows that were born from year 2005 – 2010, closed at least 5 full lactations and were culled from herds. In data set we have included data about cow milk productivity (calculated in ECM), longevity traits and reproduction traits. The reproduction traits included the number of services per conception (NSPC), calving interval (CI) and calving to conception interval (CCI) in the first five lactations. The average lifespan of LB and HBW dairy cows was 3149.5 days and in this period 39570.6 kg ECM were obtained. LB breed cows were characterized by 23.5 days longer lifespan and by 6035.4 kg ECM lower lifetime milk productivity than HBW breed cows, but they showed higher reproduction trait scores than LB breed group. HBW cows had a significantly (p is less than 0.05) higher NSPC, CCI, number of milking days (MD) and CI than LB breed cows in all five analysed lactations. The NSPC in the first lactation increased the calving age at the fifth lactation – cows with NSPC in the first lactation is greater than 4, fifth time calved 170.7 days in LB breed group and 190.8 days in HBW breed group later than cows with one NSPC in the first lactation.

It is important for every country that its territory develops evenly and in a balanced way. In the European Union (EU), a special focus is placed on the development of rural territories, as predominantly rural regions in the EU represent 57% of the territory and 24% of the population. In Latvia, the development of rural territories depends on economic growth in the key industries for the rural areas – agriculture and forestry, and logging that contributed to 4.3% of GDP and employed 9.5% of the labour force in 2011. Therefore, the research aim is to perform an assessment of the administrative territories of Latvia. The research analysed the municipalities of Latvia in terms of population and change in the population as well as in terms of revenue and income and change in the revenue and income. The research found that in Latvia the best economic performance was demonstrated by the municipalities with a population in the range of 8-12 thousand. In the period 2004 – 2014, the number of residents decreased by more than 20% in 49 municipalities of Latvia. Such municipalities are located far away from the capital city, and poor economic performance indicators with a prevailing primary sector were typical of the municipalities. The municipalities with higher tax revenue had larger populations, which increased in the period of analysis, and such municipalities are located in the vicinity of Riga and high economic performance indicators were characteristic of them.

Smart specialisation strategy (RIS3) is topical for each European Union member state – including the Baltic States. It is a smart tool for the European Union (EU) Structural Funds absorption from 2014 to 2020. Each EU member state has set their own priorities based on the country specialisation and economy strengths and weaknesses. For RIS3 development evaluation, there is RIS3 Assessment Wheel developed – a tool for assessing the RIS3 in a chosen region and positioning it between other regions. The aim of research is to find main differences between RIS3 development in the Baltic States. The tasks of research are 1) to compare existing RIS3 Assessment Wheel of Latvia and create authors version of RIS3 Assessment Wheel of Latvia; 2) to create RIS3 Assessment Wheel of Lithuania and Estonia; 3) to make comparisons between created RIS3 Assessment Wheels. The research performed is mainly based on the desk research by using content analysis and the monographic method. In all three Baltic States, there is a lack of information available about revision of priorities in connection with RIS3 development. In order to achieve the aims set in RIS3, it is essential to finish work on RIS3 legislation in Latvia, and introduce the systematic approach to RIS3 target evaluation in all Baltic States.

Foreign trade as part of the main economic relationship between a country and the global market, its regions and super-players is a significant research object. This paper deals with a particular case, exploring Latvian import in first one and a half decade of the 21st century. Since in Latvian academic society economic issues are largely dominated by economic scientist, this is an attempt by geographer to look at special aspects of mentioned ties and relationships. Research is focused around main producing sectors of economy such as agriculture, fisheries and forestry. With the aim of establishing clear ties between Latvia and its major import markets, the statistics of foreign trade was analysed using frequency analysis. The research shows that Latvian major import markets, although, similarly with its export markets, are located in the Baltic Sea region and have some differences. Major import markets are usually countries with bigger internal market, than Latvia’s. Import does follow the pattern of export markets in its separation into East and West groups with similar characteristics. Major difference, however, is differentiation of markets, where majority of high quality goods are being imported from a wider variety of markets, in contrast to export, where consolidation was a major pattern. This shows a rather close competition on world markets for potential clients, and a way for further economic change in Latvian industrial structure and operations.

Apple trees are the most common fruit tree type in the EU covering 450 000 ha. At the global scale, the largest apple exporters are EU-27, China, Chile and the USA, but the largest importers – the EU-27 and Russia. In the EU and Russia, large volumes of apples are imported during the cold time of the year. The market for fresh fruit has traditionally been driven by price, but today’s market has become even more dynamic and consumers – more fastidious. The aim of the article is to identify the main determinants influencing prices of fresh fruits and indicate a range of differences between winter and summer prices of fruits based on the example of apples. The current research should be regarded as a ‘work in progress’, as it will be a part of more extensive research conducted in several EU countries and different times of the year. In the present research, the authors have used comparative analysis, which was based on theoretical literature studies, publications and statistical data available in EUROSTAT databases as well as statistical data aggregated by Spanish, Polish and Latvian market research institutions.

Competitiveness is the key factor in order to reach the economic transformation, smart growth, governance and legal framework for the state and society for sustainable development that are stated as the major goals in the current planning period in Latvia. High-technology industries are the main drivers of economic activity in developed economies. To ensure data comparability, the official definition of the high-technology industries by Eurostat is applied in this research including two industries: manufacture of basic pharmaceutical products and pharmaceutical preparations and manufacture of computer, electronic and optical products. The research aims to analyse high-technology industries in Latvia taking into account the competitiveness and the regional allocation using a set of several indicators. According to NUTS 3, Latvia is subdivided into 6 regions; however, the high-technology industries are regionally allocated mainly in two regions, Riga and Pieriga regions. Manufacture of basic pharmaceutical products etc. employs 99% of employees in these two regions, manufacture of computer etc. products – 81% despite the fact that only 54% of employees reside in these two regions. The research confirms that the high-technology regional allocation depends on available labour resources and also education and professional training facilities in the region. We conclude that the high-technology industries are competitive in the global market as the share of the high-tech products in total exports is several times higher than the share of these industries in the manufacturing sector or in total economy. The global competitiveness of Latvia’s high-tech industries is stable and gradually rising.

Nowadays ICT has a significant role in public administration by creating opportunities to automate a lot of manual operations. ICT plays an important role both in improving customer service in public administrations as well as internal and inter-institutional co-operation processes in public administrations that promote access to services and service quality, facilitate administrative processes for citizens and businesses and contribute to the accessibility of information. Public authority daily faces a major challenge – on the one hand to reduce labour costs and on the other hand to introduce innovations. In the implementation of both these objectives public administrations deal with a serious problem – to operate in a connected environment by involving stakeholders and at the same time to solve problems by using new working methods, tools and management models. One of the strategic objectives of tax and customs administrations is to increase resource use efficiency and effectiveness; therefore, they continuously search solutions to simplify administrative procedures, to improve and develop the quality of services provided and the business environment in general, and how to automate internal work processes and significantly reduce manual workload. This study aims to examine the structure affecting the efficiency indicators, to point out the factors which have the biggest impact on increasing effectiveness of institutions.