Refinar búsqueda
Resultados 101-110 de 485
Si el agua es vida...µ porque privatizar la vida ?
2005
Torre, H.D. | Gomez, L.E. | Martinez, C. | Garcia, M.L.,Apoyo
Otimização e validação da técnica microextração em fase sólida para determinação de Trihalometanos em água | Solid phase micro-extraction technique optimization and validation to determine trihalomethanes in water Texto completo
2005
Leles, Telma Chaves | Queiroz, Maria Eliana Lopes Ribeiro de | http://lattes.cnpq.br/9610324022720611 | Neves, Antônio Augusto | Reis, César
Os trihalometanos (THMs), compostos organoclorados formados no processo de cloração da água, apresentam potencial carcinogênico, que tornam a sua presença indesejável, na água potável. Em razão dos riscos à saúde humana, várias técnicas de extração e análise vêm sendo utilizadas no monitoramento destes compostos, dentre eles a microextração em fase sólida (SPME). Essa técnica consiste em colocar em contato uma fibra revestida com material adsorvente com os vapores do analito obtidos pelo aquecimento de certo volume da amostra mantida em um recipiente hermeticamente fechado. Como são estabelecidos equilíbrios entre o analito gasoso e as matrizes (água e fibra), alguns fatores podem influenciar quantitativamente nas extrações. Numa primeira etapa foi realizado um experimento, baseado num planejamento fatorial, em que foram avaliados os efeitos da força iônica, do tempo e da temperatura de aquecimento na extração de quatro THMs em água, tendo como resposta as áreas dos picos no cromatograma. Verificou-se a inexistência de um efeito de interação estatisticamente significativo entre os fatores estudados. A influência do tipo de fibra, volume da amostra e do tempo de “splitless” do analito foram estudados por procedimento univariado. Uma vez otimizada a técnica de extração de THMs em água e da análise dos mesmos por cromatografia gasosa, procurou-se determinar os principais parâmetros de validação da técnica: Limite de detecção, limite de quantificação, precisão (repetibilidade e precisão intermediária) e exatidão. Os parâmetros da validação da técnica de SPME de THMs em água apresentaram uma faixa de linearidade, precisão e exatidão adequadas, além de um LD de 0,010; 0,005; 0,001 e 0,020 μg L-1 para o CHCl3, CHCl2Br, CHClBr2 e CHBr3, respectivamente, bem inferior aos limites estabelecidos pela legislação. A técnica foi aplicada a um conjunto de amostras coletadas na rede de distribuição de água potável da UFV. Os resultados mostraram teores de THMs bem abaixo do limite estabelecido pela legislação, permitindo concluir que o manancial que abastece a UFV está em boa condição e que o tratamento convencional é adequado. | The trihalomethanes (THMs), organic-chlorated compounds, formed in the water chlorination process, have carcinogenic potential, what makes its presence undesirable in drinking water. In view of the risks to human health, many extraction and analysis techniques have been made in the monitoring of these compounds among which the SPME, the solid phase of micro-extraction, that consists of putting in contact a fiber covered by absorvent material with vapors of analyte kept in the headspace. This steam is obtained by heating a certain volume of the sample in a hermetically closed container. As balance between the gaseous analyte and the matrixes (water and fiber) is established, some factors can quantitatively influence the extractions. In a first stage, an experiment based on a factor planning was carried out, in which the heating temperature of the extraction of four THMs in water, time and ionic force effects were evaluated and resulted in peak areas in the chromatography. It was not found to exist a statistically meaningful interaction effect between the factors studied. The influences of the kind of fiber, the sample volume and the time of analyte’s desorption were studied by the same procedure. Having the extraction of THMs in water and their analysis by a gas chromatography, one tried to determine the technique’s main parameters of validation: detection limit, quantification limit, precision (replicability and intermediate precision) and accuracy. The SPME technique validation parameters of THMs in water presented a linear area, suitable precision and accuracy, besides a detection limit (DL) of 0,010; 0,005; 0,001 and 0,020 μg L-1 for CHCl3, CHCl2Br, CHClBr2 and CHBr3, respectively, inferior to the limits required by the legislation. The technique was applied to a set of samples collected at UFV’s distribution system of drinking water. The results showed THMs levels below the limit required by the legislation, what leads to the conclusion that the water fountain that supplies UFV is in good condition and the conventional treatment is suitable. | Conselho Nacional de Desenvolvimento Científico e Tecnológico
Mostrar más [+] Menos [-]Balanço de água no volume de solo explorado pelo sistema radicular de uma planta de citros Water balance in the soil volume of a citrus plant root system Texto completo
2005
Antônio Carlos Rodrigues Cruz | Paulo Leonel Libardi | Laércio Alves de Carvalho | Genelício Crusoé Rocha
Balanço de água no volume de solo explorado pelo sistema radicular de uma planta de citros Water balance in the soil volume of a citrus plant root system Texto completo
2005
Antônio Carlos Rodrigues Cruz | Paulo Leonel Libardi | Laércio Alves de Carvalho | Genelício Crusoé Rocha
A produtividade das culturas agrícolas, associada às condições climáticas e edáficas, depende da disponibilidade de água e nutrientes no solo em época e quantidades apropriadas. A falta ou excesso de água no solo são fatores limitantes ao crescimento vegetal e podem diminuir a produtividade. Portanto, estudos que levem a um melhor entendimento de como a água se comporta na zona radicular de uma cultura agrícola no campo são de importância indiscutível ao adequado manejo agrícola. O objetivo do presente trabalho foi avaliar o método do balanço de água no solo aplicado ao volume de solo explorado pelo sistema radicular de uma planta de citros, considerando cinco profundidades de solo e cinco distâncias horizontais do tronco em duas direções a partir do tronco (uma ao longo e outra perpendicular à linha de plantas) e, então, verificar a contribuição de cada uma das camadas de solo avaliadas à evapotranspiração real da planta. O experimento foi realizado num Latossolo Vermelho-Amarelo distrófico argissólico em um pomar de citros, no município de Piracicaba (SP), durante dois períodos, um seco (40 dias) e um chuvoso (37 dias). Para atender ao objetivo proposto, um conjunto de 25 tensiômetros (cinco profundidades x cinco distâncias do tronco) foi instalado ao longo da linha e um outro, idêntico, perpendicular à linha, em direção à entrelinha. A armazenagem foi calculada a partir das leituras dos dois conjuntos de 25 tensiômetros cujos potenciais mátricos determinados foram convertidos em umidades volumétricas pelas curvas de retenção da água no solo. A drenagem interna e a ascensão capilar foram estimadas a partir das leituras diárias dos tensiômetros e da função K(fim) (condutividade hidráulica em função do potencial mátrico), por meio da equação de Darcy-Buckingham. Esta função K(fim) para cada profundidade foi determinada pelo método do perfil instantâneo realizado em área adjacente. A precipitação pluvial foi medida por pluviômetro com aquisição automática de dados instalado na área. Os resultados obtidos mostraram que o método do balanço de água proposto foi adequado para avaliar quanto cada camada de solo da zona radicular da planta contribuiu para o consumo total de água (evapotranspiração real) da planta, nos dois períodos estudados. Nesse sentido, a camada de 0,00 a 0,60 m de profundidade mostrou ser a que a planta deva apresentar maior volume de raízes ativas, de acordo com sua maior contribuição ao consumo de água pela planta.<br>Crop yields, associated to weather and soil conditions, depend on the availability of water and nutrients in the soil at the appropriate time and amounts. Lack and excess of water in the soil are limiting factors for plant growth and can reduce the productivity. Therefore, studies leading to a better understanding of how water behaves within the root zone of a field crop are of unquestionable importance for an adequate agricultural management. Objectives of this study were the evaluation of the methodology of soil water balance applied to the soil volume used by the root system of a citrus plant, considering five soil depths and five horizontal distances from the stem in two directions from the stem (one along and the other perpendicular to the plant row); and second, to verify the contribution of each evaluated soil layer to the actual plant evapotranspiration. The experiment was carried out on an Oxisol with a citrus orchard in Piracicaba, state of São Paulo, Brazil, during 40 days (dry period) and 37 days (rainy period). To attain the goal set, two sets of 25 tensiometers (5 depths x 5 distances from the stem) were installed: one along the plant row and the other perpendicular to it. Water storage was calculated from the readings of the two tensiometer sets whose matric potentials were converted into volumetric soil water contents by the respective soil water retention curve. The internal drainage and the capillary rise were determined by the Darcy-Buckingham equation through daily readings of the installed tensiometers and by the function K(phim) (hydraulic conductivity in function of the matric potential). The soil hydraulic conductivity for each depth was determined by the instantaneous profile method in an adjacent area. A rain gauge with automatic data acquisition installed in the area measured the rain. The obtained results allowed the conclusion that the proposed soil water balance methodology adequately evaluated how each soil layer of the plant root zone contributed to the total plant water use (actual plant evapotranspiration) in the two studied periods. In this sense, the 0.00 to 0.60 m soil layer should be the one in which citrus should have the greatest volume of active roots since the contribution of this layer to the plant water use was the highest.
Mostrar más [+] Menos [-]Balanço de água no volume de solo explorado pelo sistema radicular de uma planta de citros Texto completo
2005
Cruz, Antônio Carlos Rodrigues(Ministério do Meio Ambiente Secretaria do Desenvolvimento Sustentável) | Libardi, Paulo Leonel(Univerisade de São Paulo Escola Superior de Agricultura 'Luiz de Queiroz' Departamento de Ciências Exatas) | Carvalho, Laércio Alves de(Univerisade de São Paulo Escola Superior de Agricultura 'Luiz de Queiroz') | Rocha, Genelício Crusoé(Universidade Federal de Uberlândia Departamento de Solos)
A produtividade das culturas agrícolas, associada às condições climáticas e edáficas, depende da disponibilidade de água e nutrientes no solo em época e quantidades apropriadas. A falta ou excesso de água no solo são fatores limitantes ao crescimento vegetal e podem diminuir a produtividade. Portanto, estudos que levem a um melhor entendimento de como a água se comporta na zona radicular de uma cultura agrícola no campo são de importância indiscutível ao adequado manejo agrícola. O objetivo do presente trabalho foi avaliar o método do balanço de água no solo aplicado ao volume de solo explorado pelo sistema radicular de uma planta de citros, considerando cinco profundidades de solo e cinco distâncias horizontais do tronco em duas direções a partir do tronco (uma ao longo e outra perpendicular à linha de plantas) e, então, verificar a contribuição de cada uma das camadas de solo avaliadas à evapotranspiração real da planta. O experimento foi realizado num Latossolo Vermelho-Amarelo distrófico argissólico em um pomar de citros, no município de Piracicaba (SP), durante dois períodos, um seco (40 dias) e um chuvoso (37 dias). Para atender ao objetivo proposto, um conjunto de 25 tensiômetros (cinco profundidades x cinco distâncias do tronco) foi instalado ao longo da linha e um outro, idêntico, perpendicular à linha, em direção à entrelinha. A armazenagem foi calculada a partir das leituras dos dois conjuntos de 25 tensiômetros cujos potenciais mátricos determinados foram convertidos em umidades volumétricas pelas curvas de retenção da água no solo. A drenagem interna e a ascensão capilar foram estimadas a partir das leituras diárias dos tensiômetros e da função K(fim) (condutividade hidráulica em função do potencial mátrico), por meio da equação de Darcy-Buckingham. Esta função K(fim) para cada profundidade foi determinada pelo método do perfil instantâneo realizado em área adjacente. A precipitação pluvial foi medida por pluviômetro com aquisição automática de dados instalado na área. Os resultados obtidos mostraram que o método do balanço de água proposto foi adequado para avaliar quanto cada camada de solo da zona radicular da planta contribuiu para o consumo total de água (evapotranspiração real) da planta, nos dois períodos estudados. Nesse sentido, a camada de 0,00 a 0,60 m de profundidade mostrou ser a que a planta deva apresentar maior volume de raízes ativas, de acordo com sua maior contribuição ao consumo de água pela planta. | Crop yields, associated to weather and soil conditions, depend on the availability of water and nutrients in the soil at the appropriate time and amounts. Lack and excess of water in the soil are limiting factors for plant growth and can reduce the productivity. Therefore, studies leading to a better understanding of how water behaves within the root zone of a field crop are of unquestionable importance for an adequate agricultural management. Objectives of this study were the evaluation of the methodology of soil water balance applied to the soil volume used by the root system of a citrus plant, considering five soil depths and five horizontal distances from the stem in two directions from the stem (one along and the other perpendicular to the plant row); and second, to verify the contribution of each evaluated soil layer to the actual plant evapotranspiration. The experiment was carried out on an Oxisol with a citrus orchard in Piracicaba, state of São Paulo, Brazil, during 40 days (dry period) and 37 days (rainy period). To attain the goal set, two sets of 25 tensiometers (5 depths x 5 distances from the stem) were installed: one along the plant row and the other perpendicular to it. Water storage was calculated from the readings of the two tensiometer sets whose matric potentials were converted into volumetric soil water contents by the respective soil water retention curve. The internal drainage and the capillary rise were determined by the Darcy-Buckingham equation through daily readings of the installed tensiometers and by the function K(phim) (hydraulic conductivity in function of the matric potential). The soil hydraulic conductivity for each depth was determined by the instantaneous profile method in an adjacent area. A rain gauge with automatic data acquisition installed in the area measured the rain. The obtained results allowed the conclusion that the proposed soil water balance methodology adequately evaluated how each soil layer of the plant root zone contributed to the total plant water use (actual plant evapotranspiration) in the two studied periods. In this sense, the 0.00 to 0.60 m soil layer should be the one in which citrus should have the greatest volume of active roots since the contribution of this layer to the plant water use was the highest.
Mostrar más [+] Menos [-]Compressibilidade de agregados de um Latossolo Amarelo da Amazônia em resposta ao potencial da água do solo Aggregate compressibility of an Amazon Oxisol in response to water potential Texto completo
2005
João Tavares Filho | Michel Grimaldi | Daniel Tessier
Compressibilidade de agregados de um Latossolo Amarelo da Amazônia em resposta ao potencial da água do solo Aggregate compressibility of an Amazon Oxisol in response to water potential Texto completo
2005
João Tavares Filho | Michel Grimaldi | Daniel Tessier
Normalmente a utilização agrícola dos solos é realizada com máquinas e implementos pesados que lhes causam compactação, responsável por afetar a disponibilidade de ar e de água para as plantas. O objetivo deste trabalho foi estudar o comportamento de agregados de Latossolo Amarelo da Amazônia sob compressão mecânica, submetidos a quatro níveis de umidade. Amostras de solo, úmidas e indeformadas, coletadas sob floresta, no horizonte A, a 10 cm de profundidade, e no horizonte B, a 150 cm de profundidade, foram utilizadas neste trabalho. No laboratório, essas amostras foram fragmentadas e peneiradas para obtenção de agregados de 2 a 3 mm de diâmetro, os quais foram colocados em equilíbrio com umidade de quatro potenciais matriciais para, após essa etapa, sofrerem uma compressão uniaxial com pressões de 32 a 1.000 kPa. Os resultados mostraram que a maior compressibilidade dos agregados, tanto para o horizonte A como para o B, ocorreu para o potencial matricial -32 kPa (umidade de 0,38 kg kg-1), enquanto a menor ocorreu para os potenciais -1 kPa e -1.000 kPa (umidade de 0,32 e 0,30 kg kg-1, respectivamente), indicando que esse solo não deve ser trabalhado com umidades próximas a 0,38 kg kg-1. A maior redução de volume dos agregados, tanto para o horizonte A como para o horizonte B, foi obtida para pressões mecânicas inferiores a 400 kPa, indicando que esses solos são bastante sensíveis à compactação, principalmente os agregados do horizonte A, possivelmente por terem melhores condições estruturais decorrentes do maior teor de matéria orgânica.<br>The agricultural use of soils usually relies on the use of heavy machinery that cause soil compaction, affecting the amount of air and water available for plants. The present study was carried out in the year 2000 and aimed at studying the performance of aggregates of an Amazon Oxisol under mechanical compression and that were subjected to varying degrees of matric potential. Humid and undisturbed tropical forest soil samples were collected from the A horizon (10 cm deep) and B horizon (150 cm deep). In the laboratory, the samples were broken into fragments and sieved to obtain 2 to 3 mm aggregates, which were placed in equilibrium under four matric potentials. Thereafter, they were exposed to uni-dimensional compression with pressures varying from 32 to 1.000 kPa. The highest compressibility of the aggregates for horizon A as well as for horizon B was observed for a matric potential of -32 kPa (soil moisture of 0.38 kg kg-1), and the lowest for the potentials of -1 kPa and -1.000 kPa (soil moistures of 0.32 and 0.30 kg kg-1, respectively), indicating that the soil should not be managed when moisture approximates 0.38 kg kg-1. The largest reduction in aggregate volume occurred under a mechanical pressure below 400 kPa. This indicates that these soils are quite prone to compaction, specially the aggregates of the A horizon (10 cm), possibly because of better structural conditions owing to the higher organic matter content.
Mostrar más [+] Menos [-]Compressibilidade de agregados de um Latossolo Amarelo da Amazônia em resposta ao potencial da água do solo Texto completo
2005
Tavares Filho, João(Universidade Estadual de Londrina Centro de Ciências Agrárias Depto de Agronomia) | Grimaldi, Michel(Institut de Recherche pour le Developpment) | Tessier, Daniel(Institut de Recherche pour le Developpment)
Normalmente a utilização agrícola dos solos é realizada com máquinas e implementos pesados que lhes causam compactação, responsável por afetar a disponibilidade de ar e de água para as plantas. O objetivo deste trabalho foi estudar o comportamento de agregados de Latossolo Amarelo da Amazônia sob compressão mecânica, submetidos a quatro níveis de umidade. Amostras de solo, úmidas e indeformadas, coletadas sob floresta, no horizonte A, a 10 cm de profundidade, e no horizonte B, a 150 cm de profundidade, foram utilizadas neste trabalho. No laboratório, essas amostras foram fragmentadas e peneiradas para obtenção de agregados de 2 a 3 mm de diâmetro, os quais foram colocados em equilíbrio com umidade de quatro potenciais matriciais para, após essa etapa, sofrerem uma compressão uniaxial com pressões de 32 a 1.000 kPa. Os resultados mostraram que a maior compressibilidade dos agregados, tanto para o horizonte A como para o B, ocorreu para o potencial matricial -32 kPa (umidade de 0,38 kg kg-1), enquanto a menor ocorreu para os potenciais -1 kPa e -1.000 kPa (umidade de 0,32 e 0,30 kg kg-1, respectivamente), indicando que esse solo não deve ser trabalhado com umidades próximas a 0,38 kg kg-1. A maior redução de volume dos agregados, tanto para o horizonte A como para o horizonte B, foi obtida para pressões mecânicas inferiores a 400 kPa, indicando que esses solos são bastante sensíveis à compactação, principalmente os agregados do horizonte A, possivelmente por terem melhores condições estruturais decorrentes do maior teor de matéria orgânica. | The agricultural use of soils usually relies on the use of heavy machinery that cause soil compaction, affecting the amount of air and water available for plants. The present study was carried out in the year 2000 and aimed at studying the performance of aggregates of an Amazon Oxisol under mechanical compression and that were subjected to varying degrees of matric potential. Humid and undisturbed tropical forest soil samples were collected from the A horizon (10 cm deep) and B horizon (150 cm deep). In the laboratory, the samples were broken into fragments and sieved to obtain 2 to 3 mm aggregates, which were placed in equilibrium under four matric potentials. Thereafter, they were exposed to uni-dimensional compression with pressures varying from 32 to 1.000 kPa. The highest compressibility of the aggregates for horizon A as well as for horizon B was observed for a matric potential of -32 kPa (soil moisture of 0.38 kg kg-1), and the lowest for the potentials of -1 kPa and -1.000 kPa (soil moistures of 0.32 and 0.30 kg kg-1, respectively), indicating that the soil should not be managed when moisture approximates 0.38 kg kg-1. The largest reduction in aggregate volume occurred under a mechanical pressure below 400 kPa. This indicates that these soils are quite prone to compaction, specially the aggregates of the A horizon (10 cm), possibly because of better structural conditions owing to the higher organic matter content.
Mostrar más [+] Menos [-]Compressibilidade de agregados de um latossolo amarelo da amazõnia em resposta ao potencial da agua do solo. Texto completo
2005
Tavares Filho, João | Grimaldi, Michel | Tessier, Daniel, D. | State University of Londrina = Universidade Estadual de Londrina | Institut de Recherche pour le Développement (IRD) | Unité de recherche Science du Sol (USS) ; Institut National de la Recherche Agronomique (INRA)
International audience | The agricultural use of soils usually relies on the use of heavy machinery that cause soil compaction, affecting the amount of air and water available for plants. The present study was carried out in the year 2000 and aimed at studying the performance of aggregates of an Amazon Oxisol under mechanical compression and that were subjected to varying degrees of matric potential. Humid and undisturbed tropical forest soil samples were collected from the A horizon (10 cm deep) and B horizon (150 cm deep). In the laboratory, the samples were broken into fragments and sieved to obtain 2 to 3 mm aggregates, which were placed in equilibrium under four matric potentials. Thereafter, they were exposed to uni-dimensional compression with pressures varying from 32 to 1.000 kPa. The highest compressibility of the aggregates for horizon A as well as for horizon B was observed for a matric potential of -32 kPa (soil moisture of 0.38 kg kg-1), and the lowest for the potentials of -1 kPa and -1.000 kPa (soil moistures of 0.32 and 0.30 kg kg-1, respectively), indicating that the soil should not be managed when moisture approximates 0.38 kg kg-1. The largest reduction in aggregate volume occurred under a mechanical pressure below 400 kPa. This indicates that these soils are quite prone to compaction, specially the aggregates of the A horizon (10 cm), possibly because of better structural conditions owing to the higher organic matter content.
Mostrar más [+] Menos [-]Qualidade da água para irrigação por aspersão na Mesorregião Sudoeste Piauiense. Texto completo
2023 | 2005
LEAL, C. M. | ANDRADE JUNIOR, A. S. de | SILVA, E. F. de F. e. | BASTOS, E. A. | CLARICE MARIA LEAL, UFPI; ADERSON SOARES DE ANDRADE JUNIOR, CPAMN; ÊNIO FARIAS DE FRANÇA E SILVA, BOLSISTA DTI-C CNPQ/IMSEAR; EDSON ALVES BASTOS, CPAMN.
O objetivo deste trabalho é avaliar a qualidade da água de poços localizados na mesorregião sudoeste piauiense para irrigação por aspersão.
Mostrar más [+] Menos [-]Consumo de água pela cultura do crisântemo cultivada em ambiente protegido Texto completo
2005
Pereira, Joelma R. D.(UFLA DEG) | Carvalho, Jacinto de A.(Departamento de Engenharia) | Miguel, Douglas S.(Departamento de Engenharia) | Santana, Márcio J. de(Departamento de Engenharia)
Consumo de água pela cultura do crisântemo cultivada em ambiente protegido Texto completo
2005
Pereira, Joelma R. D.(UFLA DEG) | Carvalho, Jacinto de A.(Departamento de Engenharia) | Miguel, Douglas S.(Departamento de Engenharia) | Santana, Márcio J. de(Departamento de Engenharia)
Com o objetivo de determinar o consumo de água pela cultura do crisântemo, ao longo do seu ciclo de desenvolvimento, conduziu-se um experimento em ambiente protegido, na Universidade Federal de Lavras - MG, com as cultivares Kátia e Bi Time. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial, com duas cultivares e duas freqüências de irrigação, com oito repetições, sendo o manejo da irrigação feito utilizando-se do método da pesagem. O consumo de água entre irrigações foi obtido pela pesagem dos vasos. Instalou-se na área experimental um tanque Classe A, para obter a evaporação e posterior correlação com o consumo hídrico das cultivares. Verificou-se que não houve diferença significativa do consumo quando as cultivares foram irrigadas uma e duas vezes ao dia. Observou-se que as cultivares possuem consumo diferenciado segundo seus estádios de desenvolvimento. O consumo médio de água, ao longo do ciclo, para a freqüência de irrigação de uma e duas vezes ao dia, da cultivar Kátia, foi de 118 e 108 mL dia-1, e da cultivar Bi Time, foi de 98 e 113 mL dia-1, respectivamente. | With the objective of determining the chrysanthemum water consumption, an experiment was carried out at the Universidade Federal de Lavras, MG, Brazil, under greenhouse condition, with two chrysanthemums cultivars, Kátia and Bi Time. A completely randomized experimental design in a factorial outline, with eight replications, two cultivars and two irrigation frequencies were used. Irrigation scheduling was based on pot plant weight. The water consumption between irrigations was obtained by weighting the pot. A class A tank, was used to obtain the evaporation and subsequent correlation with the crop water consumption. It was verified that there was not significant difference of water requirement when the cultivars were irrigated once and twice day. It was observed that the cultivars presented differentiated water requirement according to the development stage. Along the cycle, the average water consumption, for once and twice day irrigation, for cultivar Kátia was 118 and 108 mL day-1 and for the cultivar Bi Time was 98 and 113 mL day-1, respectively.
Mostrar más [+] Menos [-]Consumo de água pela cultura do crisântemo cultivada em ambiente protegido Water requirement by chrysanthemum cultivated under greenhouse conditions Texto completo
2005
Joelma R. D. Pereira | Jacinto de A. Carvalho | Douglas S. Miguel | Márcio J. de Santana
Com o objetivo de determinar o consumo de água pela cultura do crisântemo, ao longo do seu ciclo de desenvolvimento, conduziu-se um experimento em ambiente protegido, na Universidade Federal de Lavras - MG, com as cultivares Kátia e Bi Time. O delineamento experimental foi o inteiramente casualizado, em esquema fatorial, com duas cultivares e duas freqüências de irrigação, com oito repetições, sendo o manejo da irrigação feito utilizando-se do método da pesagem. O consumo de água entre irrigações foi obtido pela pesagem dos vasos. Instalou-se na área experimental um tanque Classe A, para obter a evaporação e posterior correlação com o consumo hídrico das cultivares. Verificou-se que não houve diferença significativa do consumo quando as cultivares foram irrigadas uma e duas vezes ao dia. Observou-se que as cultivares possuem consumo diferenciado segundo seus estádios de desenvolvimento. O consumo médio de água, ao longo do ciclo, para a freqüência de irrigação de uma e duas vezes ao dia, da cultivar Kátia, foi de 118 e 108 mL dia-1, e da cultivar Bi Time, foi de 98 e 113 mL dia-1, respectivamente.<br>With the objective of determining the chrysanthemum water consumption, an experiment was carried out at the Universidade Federal de Lavras, MG, Brazil, under greenhouse condition, with two chrysanthemums cultivars, Kátia and Bi Time. A completely randomized experimental design in a factorial outline, with eight replications, two cultivars and two irrigation frequencies were used. Irrigation scheduling was based on pot plant weight. The water consumption between irrigations was obtained by weighting the pot. A class A tank, was used to obtain the evaporation and subsequent correlation with the crop water consumption. It was verified that there was not significant difference of water requirement when the cultivars were irrigated once and twice day. It was observed that the cultivars presented differentiated water requirement according to the development stage. Along the cycle, the average water consumption, for once and twice day irrigation, for cultivar Kátia was 118 and 108 mL day-1 and for the cultivar Bi Time was 98 and 113 mL day-1, respectively.
Mostrar más [+] Menos [-]Etapas de Diseño del Sistema de Agua Potable para una Edificación Texto completo
2005
Rodriguez Díaz, Héctor Alfonso | Centro de Estudios Hidráulicos
Las instalaciones hidráulicas y sanitarias siempre han ocupado un lugar importante dentro de los diseños y construcción de cualquier edificación. El trazado, diseño y construcción adecuados de este tipo de instalaciones garantizan el funcionamiento óptimo de los aparatos hidráulicos y sanitarios, además de que satisfacen las necesidades del usuario de acuerdo con una serie de condiciones establecidas previamente. El autor ha desarrollado una metodología clara y sencilla en la que todas las etapas de los diseños tienen su sustento teórico, con lo cual, mediante sencillas hojas de cálculo, es posible realizar los diseños evitando las tablas, ábacos y nomogramas. Igualmente presenta recomendaciones para el trazado de las redes, establece criterios de diseño y recomienda ecuaciones para la evaluación de los sistemas basados en el estudio y su experiencia en este tipo de obras. Mediante ejercicios se desarrolla adecuadamente la metodología planteada. Teniendo en cuenta la utilización de nuevas fuentes de energía, se dedica un apartado especial al diseño de las redes interiores para gas. Se plantean las características básicas de una red, las necesidades de los aparatos y una metodología de cálculo, lo que asegura el adecuado suministro y funcionamiento de los mismos. El autor ha querido poner a disposición de los ingenieros y profesionales dedicados al diseño y construcción de las instalaciones hidráulicas, sanitarias y de gas para edificaciones, una serie de herramientas que facilitan el proceso y aseguran la calidad de las obras. El autor ha desarrollado una metodología clara y sencilla en la que todas las etapas de los diseños tienen su sustento teórico, con lo cual, mediante sencillas hojas de cálculo, es posible realizar los diseños evitando las tablas, ábacos y nomogramas. Igualmente presenta recomendaciones para el trazado de las redes, establece criterios de diseño y recomienda ecuaciones para la evaluación de los sistemas basados en el estudio y su experiencia en este tipo de obras. Mediante ejercicios se desarrolla adecuadamente la metodología planteada. Teniendo en cuenta la utilización de nuevas fuentes de energía, se dedica un apartado especial al diseño de las redes interiores para gas. Se plantean las características básicas de una red, las necesidades de los aparatos y una metodología de cálculo, lo que asegura el adecuado suministro y funcionamiento de los mismos. El autor ha querido poner a disposición de los ingenieros y profesionales dedicados al diseño y construcción de las instalaciones hidráulicas, sanitarias y de gas para edificaciones, una serie de herramientas que facilitan el proceso y aseguran la calidad de las obras. Teniendo en cuenta la utilización de nuevas fuentes de energía, se dedica un apartado especial al diseño de las redes interiores para gas. Se plantean las características básicas de una red, las necesidades de los aparatos y una metodología de cálculo, lo que asegura el adecuado suministro y funcionamiento de los mismos. El autor ha querido poner a disposición de los ingenieros y profesionales dedicados al diseño y construcción de las instalaciones hidráulicas, sanitarias y de gas para edificaciones, una serie de herramientas que facilitan el proceso y aseguran la calidad de las obras. El autor ha querido poner a disposición de los ingenieros y profesionales dedicados al diseño y construcción de las instalaciones hidráulicas, sanitarias y de gas para edificaciones, una serie de herramientas que facilitan el proceso y aseguran la calidad de las obras. | Hydraulic and sanitary installations have always occupied an important place in the design and construction of any building. The proper layout, design and construction of this type of installations guarantee the optimal functioning of the hydraulic and sanitary devices, in addition to satisfying the user's needs according to a series of previously established conditions. The author has developed a clear and simple methodology in which all the stages of the designs have their theoretical support, with which, by means of simple spreadsheets, it is possible to carry out the designs avoiding tables, abacuses and nomograms. It also presents recommendations for the layout of the networks, establishes design criteria and recommends equations for the evaluation of the systems based on the study and its experience in this type of works. The proposed methodology is adequately developed through exercises. Taking into account the use of new energy sources, a special section is dedicated to the design of interior gas networks. The basic characteristics of a network, the needs of the appliances and a calculation methodology are presented, which ensures the adequate supply and operation of the same. The author has made available to engineers and professionals dedicated to the design and construction of hydraulic, sanitary and gas installations for buildings, a series of tools that facilitate the process and ensure the quality of the works. The author has developed a clear and simple methodology in which all the stages of the designs have their theoretical support, with which, by means of simple spreadsheets, it is possible to carry out the designs avoiding tables, abacuses and nomograms. It also presents recommendations for the layout of the networks, establishes design criteria and recommends equations for the evaluation of the systems based on the study and its experience in this type of works. The proposed methodology is adequately developed through exercises. Taking into account the use of new energy sources, a special section is dedicated to the design of interior gas networks. The basic characteristics of a network, the needs of the appliances and a calculation methodology are presented, which ensures the adequate supply and operation of the same. The author wanted to make available to engineers and professionals dedicated to the design and construction of hydraulic, sanitary and gas installations for buildings, a series of tools that facilitate the process and ensure the quality of the works. Taking into account the use of new energy sources, a special section is dedicated to the design of interior gas networks. The basic characteristics of a network, the needs of the appliances and a calculation methodology are presented, which ensures the adequate supply and operation of the same. The author wanted to make available to engineers and professionals dedicated to the design and construction of hydraulic, sanitary and gas installations for buildings, a series of tools that facilitate the process and ensure the quality of the works. The author wanted to make available to engineers and professionals dedicated to the design and construction of hydraulic, sanitary and gas installations for buildings, a series of tools that facilitate the process and ensure the quality of the works.
Mostrar más [+] Menos [-]Variação dos parâmetros físicos, químicos e biológicos da água em um sistema de irrigação localizada Variation of physical, chemical and biological parameters of water in a trickle irrigation system Texto completo
2005
Túlio A. P. Ribeiro | Rogério P. da S. Airoldi | José E. S. Paterniani | Marcelo J. M. da Silva
O presente trabalho teve como objetivo pesquisar, uma fonte hídrica superficial utilizada em um sistema de irrigação por gotejamento, com o fim de se analisar a variação temporal, durante um ano, dos principais parâmetros físicos, químicos e biológicos da sua água e que causam problemas de entupimento nos emissores: sólidos suspensos, turbidez, pH, ferro, sulfetos, condutividade elétrica, sólidos dissolvidos, dureza, índice de Langelier, algas e bactérias Os critérios para avaliação das impurezas presentes na água de irrigação se basearam em estudos realizados por Bucks & Nakayama (1986), no sentido de dar uma orientação de caracter quantitativo que propuseram uma classificação da água, indicando critérios para avaliação do risco de entupimento dos emissores nos sistemas de irrigação localizada. Os resultados mostraram que os parâmetros químicos apresentaram médio risco de obstrução aos emissores, foram pH, ferro e sulfetos, enquanto os parâmetros físicos e biológicos analisados indicaram baixo risco de entupimento dos emissores. Constatou-se correlação dos resultados entre os parâmetros físicos, turbidez e sólidos suspensos totais e o parâmetro biológico algas, com sólidos suspensos totais.<br>This work had the objective to study a superficial water source utilized in a trickle irrigation system. The principal physical, chemical and biological parameters of the irrigation water that caused problems of obstrution in emitters: pH, turbidity, suspensded solids, dissolved solids, EC, hardness, Langelier index, algae and bacterium were analysed during the year. The evaluation criterion of the impurities present in the irrigation water were based on the studies conducted by Bucks & Nakayama (1986), in order to give quantitative orientation of risk of obstruction of drippers in trickle irrigation systems. The chemical factors which showed moderate clogging risk to the emitters were: pH, total iron and sulphite concentration. All the other analysed parameters resulted in values that did not present obstruction risk to the emitters. A correlation was found between the physical parameters-turbidity and suspended solids and the biological parameters- algae and total suspended solids.
Mostrar más [+] Menos [-]Perdas de solo, água, nutrientes e carbono orgânico em Cambissolo e Latossolo sob chuva natural Soil, water, nutrients and organic carbon losses from inceptisol and Oxisol under natural rainfall Texto completo
2005
Antonio Marcos da Silva | Marx Leandro Naves Silva | Nilton Curi | José Maria de Lima | Junior Cesar Avanzi | Mozart Martins Ferreira
Perdas de solo, água, nutrientes e carbono orgânico em Cambissolo e Latossolo sob chuva natural Soil, water, nutrients and organic carbon losses from inceptisol and Oxisol under natural rainfall Texto completo
2005
Antonio Marcos da Silva | Marx Leandro Naves Silva | Nilton Curi | José Maria de Lima | Junior Cesar Avanzi | Mozart Martins Ferreira
A erosão hídrica é responsável por perdas de nutrientes e carbono dos solos agrícolas. A minimização das perdas de solo, água, nutrientes e carbono orgânico constitui importante aspecto do planejamento conservacionista. Os objetivos deste trabalho foram avaliar as perdas, por erosão hídrica, de solo, água, nutrientes e carbono orgânico em Cambissolo Háplico Tb distrófico típico (CXbd) e Latossolo Vermelho distroférrico típico (LVdf). As coletas foram realizadas depois de cada evento de chuva considerada erosiva. As perdas médias anuais de solo foram de 205,65 Mg ha-1 para o CXbd e de 14,90 Mg ha-1 para o LVdf. As perdas médias anuais de água foram 369 mm para o CXbd e 113 mm para o LVdf, representando, respectivamente, 28,67% e 8,78% do total precipitado. Os atributos mineralógicos, químicos e físicos e o relevo de ocorrência desses solos explicam satisfatoriamente os resultados obtidos. O CXbd apresentou as maiores perdas de nutrientes e carbono orgânico. O carbono orgânico foi encontrado em maior quantidade no sedimento erodido, evidenciado pelo caráter seletivo da erosão.<br>Water erosion is responsible for considerable losses of nutrients and organic carbon from agricultural soils. The reduction of soil, water, nutrients and organic carbon losses constitutes an important aspect of the conservation planning. The objectives of this work were to evaluate the soil, water, nutrients and organic carbon losses from a Typic Dystrochept (TD) and a Rhodic Hapludox (RH). The samplings were performed after each considered erosive rain event. The mean annual soil losses were 205.65 Mg ha-1 for the TD and 14.90 Mg ha-1 for the RH. The mean annual water losses were 369 mm for the TD and 113 mm for the RH, representing 28.67% and 8.78% of the total precipitation, respectively. The mineralogical, chemical and physical attributes and the relief where these soils occur satisfactorily explain the obtained results. The TD presents higher nutrients and organic carbon losses than the RH. The organic carbon was the main component of the eroded sediment, evidenced by the selective character of erosion.
Mostrar más [+] Menos [-]Perdas de solo, água, nutrientes e carbono orgânico em Cambissolo e Latossolo sob chuva natural Texto completo
2005
Silva, Antonio Marcos da(Usina Moema Açúcar e Álcool) | Silva, Marx Leandro Naves(Universidade Federal de Lavras Dep. de Ciência do Solo) | Curi, Nilton(Universidade Federal de Lavras Dep. de Ciência do Solo) | Lima, José Maria de(Universidade Federal de Lavras Dep. de Ciência do Solo) | Avanzi, Junior Cesar(Universidade Federal de Lavras Dep. de Ciência do Solo) | Ferreira, Mozart Martins(Universidade Federal de Lavras Dep. de Ciência do Solo)
A erosão hídrica é responsável por perdas de nutrientes e carbono dos solos agrícolas. A minimização das perdas de solo, água, nutrientes e carbono orgânico constitui importante aspecto do planejamento conservacionista. Os objetivos deste trabalho foram avaliar as perdas, por erosão hídrica, de solo, água, nutrientes e carbono orgânico em Cambissolo Háplico Tb distrófico típico (CXbd) e Latossolo Vermelho distroférrico típico (LVdf). As coletas foram realizadas depois de cada evento de chuva considerada erosiva. As perdas médias anuais de solo foram de 205,65 Mg ha-1 para o CXbd e de 14,90 Mg ha-1 para o LVdf. As perdas médias anuais de água foram 369 mm para o CXbd e 113 mm para o LVdf, representando, respectivamente, 28,67% e 8,78% do total precipitado. Os atributos mineralógicos, químicos e físicos e o relevo de ocorrência desses solos explicam satisfatoriamente os resultados obtidos. O CXbd apresentou as maiores perdas de nutrientes e carbono orgânico. O carbono orgânico foi encontrado em maior quantidade no sedimento erodido, evidenciado pelo caráter seletivo da erosão. | Water erosion is responsible for considerable losses of nutrients and organic carbon from agricultural soils. The reduction of soil, water, nutrients and organic carbon losses constitutes an important aspect of the conservation planning. The objectives of this work were to evaluate the soil, water, nutrients and organic carbon losses from a Typic Dystrochept (TD) and a Rhodic Hapludox (RH). The samplings were performed after each considered erosive rain event. The mean annual soil losses were 205.65 Mg ha-1 for the TD and 14.90 Mg ha-1 for the RH. The mean annual water losses were 369 mm for the TD and 113 mm for the RH, representing 28.67% and 8.78% of the total precipitation, respectively. The mineralogical, chemical and physical attributes and the relief where these soils occur satisfactorily explain the obtained results. The TD presents higher nutrients and organic carbon losses than the RH. The organic carbon was the main component of the eroded sediment, evidenced by the selective character of erosion.
Mostrar más [+] Menos [-]ANÁLISE DA UNIFORMIDADE DE DISTRIBUIÇÃO DE ÁGUA DE UM EQUIPAMENTO AUTOPROPELIDO Texto completo
2005
Rocha, Felizardo Adenilson | Pereira, Geraldo Magela | Rocha, Fernando da Silva | Silva, Joseane Oliveira da
ANÁLISE DA UNIFORMIDADE DE DISTRIBUIÇÃO DE ÁGUA DE UM EQUIPAMENTO AUTOPROPELIDO Felizardo Adenilson Rocha1; Geraldo Magela Pereira2; Fernando da Silva Rocha3; Joseane Oliveira da Silva41Departamento de Engenharia Agrícola, Universidade Federal de Viçosa, Rua Antônio Ferreira Mendes, 65 CEP 36570-000, Viçosa, MG, [email protected] de Engenharia, Universidade Federal Lavras. Lavras, MG3Departamento de Fitopatologia, Universidade Federal Lavras, Lavras, MG4 Centro de Ciências e Tecnologias Agropecuárias, Produção Vegetal, Universidade Estadual do Norte Fluminense , Campos, RJ 1 RESUMO Este estudo objetivou avaliar o desempenho de um equipamento de irrigação autopropelido tipo carretel enrolador, acoplado com canhão tipo turbina, em condições de campo. Para este estudo, foram testadas três pressões (400, 450 e 500 kPa), três velocidades de recolhimento da mangueira (40 e 70 e 120 m h-1) e bocal do aspersor de 22 mm, com a finalidade de verificar a influência destes parâmetros na uniformidade de distribuição de água, intensidade de aplicação, lâmina média e perda de carga na mangueira e na turbina. Os resultados da análise estatística demonstraram que os maiores valores de CUC foram verificados para larguras de faixas correspondentes a 70% e 80% do diâmetro molhado pelo aspersor (DM). Observou-se que é possível trabalhar com pressão no aspersor de 400 kPa, sem prejuízo considerável na uniformidade de distribuição de água. O aparelho irrigamatic 100 foi eficiente no controle velocidade de recolhimento, permitindo melhor controle para velocidades a inferiores a 70 m h-1. UNITERMOS: Avaliação, autopropelido, características hidráulicas. ROCHA, F. A.; PEREIRA, G. M.; ROCHA, F. S.; SILVA, J. O. ANALYSIS OF WATER DISTRIBUTION UNIFORMITY OF A TRAVELER IRRIGATION EQUIPMENT 2 ABSTRACT This study aimed to evaluate the performance of a traveler irrigation machine, rolling spool type, coupled to the gun turbine, under field conditions. Three pressures (400, 450 and 500 kPa), three hose coiling speeds (40, 70 and 120 m h-1), and a 22-mm nozzle were studied to verify the influence of these parameters in the water distribution uniformity, application intensity and applied average height. The results obtained in this work showed the largest values of CUC were verified for band breadths corresponding to 70% and 80% of the diameter that was wet by the sprinkler (WD). It was observed that it is possible to use 400kP without considerable damage in the water distribution uniformity. The irrigamatic 100 was efficient to control hose coiling speed, allowing better results for speeds lower than 70 m h-1. KEYWORDS: Evaluation, traveler, hydraulic characteristics.
Mostrar más [+] Menos [-]