Soil polycyclic aromatic hydrocarbons (PAHs) generated from industrial processes are highly spatially heterologous, with limited quantitative studies on their main influencing factors. The present study evaluated the soil PAHs in three types of industrial parks (a petrochemical industrial park, a brominated flame retardant manufacturing park, and an e-waste dismantling park) and their surroundings. The total concentrations of 16 PAHs in the parks were 340–2.43 × 10³, 26.2–2.63 × 10³, and 394–2.01 × 10⁴ ng/g, which were significantly higher than those in the surrounding areas by 1–2 orders of magnitude, respectively. The highest soil PAH contamination was observed in the e-waste dismantling park. Nap can be considered as characteristic pollutant in the petrochemical industrial park, while Phe in the flame retardant manufacturing park and e-waste dismantling park. Low molecular weight PAHs (2–3 rings) predominated in the petrochemical industrial park (73.0%) and the surrounding area of brominated flame retardant manufacturing park (80.3%). However, high molecular weight PAHs (4–6 rings) were enriched in the other sampling sites, indicating distinct sources and determinants of soil PAHs. Source apportionment results suggested that PAHs in the parks were mainly derived from the leakage of petroleum products in the petroleum manufacturing process and pyrolysis or combustion of fossil fuels. Contrarily, the PAHs in the surrounding areas could have been derived from the historical coal combustion and traffic emissions. Source emissions, wind direction, and local topography influenced the PAH spatial distributions.

Optimizing landscape pattern to reduce the risk of non-point source (NPS) pollution is an effective measure to improve river water quality. The “source-sink” landscape theory is a recent research tool for landscape pattern analysis that can effectively integrate landscape type, area, spatial location, and topographic features to depict the spatial heterogeneity of NPS pollution. Based on this theory, we quantitatively analyzed the influence of “source-sink” landscape pattern on the river water quality in one of the most intensive agricultural watersheds in Southeastern China. The results indicated that the proportion of “sink” landscape (68.59%) was greater than that of “source” landscape (31.41%) in the study area. In addition, when elevation and slope increased, the “source” landscape proportion decreased, and the “sink” landscape proportion increased. Nitrogen (N) and phosphorus (P) pollutants in rivers showed significant seasonal and spatial variations. Farmland was the primary source of nitrate nitrogen (NO₃⁻-N) and total nitrogen (TN) pollution, whereas residential land was the primary source of ammonium nitrogen (NH₄⁺-N) and total phosphorus (TP) pollution. Intensively cultivated areas and densely inhabited areas degraded water quality despite high proportions of forest land. The four “source-sink” landscape indices (LWLI, LWLI'e, LWLI's, LWLI'd) had significant positive correlations with NO₃⁻-N and TN and weak correlations with NH₄⁺-N and TP. The capacity of LWLI to quantify the NPS pollution was greater in agricultural areas than in residential areas. The “source-sink” landscape thresholds resulted in abrupt changes in water quality. When LWLI was ∼0.35, the probability of river water quality degradation increased sharply. The results suggest the importance of optimizing the “source-sink” landscape pattern for mitigating agricultural NPS pollution and provide policy makers with adequate new information on the agroecosystem-environmental interface in highly developed agricultural watersheds.

As an important form of urban water resource, urban artificial lakes are severely affected by rapid urbanization and interference from human activities. These small lakes are characterized by their unique irregular shape, fragile ecosystem, and relatively closed, stagnant waterbodies. However, few studies have focused on their hydrodynamics and water quality, in particular the restoration methods and mechanisms remaining unclear. The present study applied the MIKE 21 FM model to investigate the effects of water diversion on water quality in a typical urban artificial lake. By considering different flow arrangements, several model scenarios were set up to predict the impacts of water diversion on selected water quality parameter. The results showed that the effectiveness of water diversion was directly related to flow velocity, the relative position to the fresh water inlet, the amount and quality of fresh water and water remaining to be diluted, and the circulation direction of flow field. The inflow–outflow arrangement was the primary factor determining the flow field and NH₃–N variation trends across the lake, and an increased discharge exhibited unequal effects in individual zones. Wind was also important for the formation of flow circulation and pollutant variation. Methods were proposed for enhancing water quality in urban small-scale lakes, including changing the way diversion projects are managed, improving the quality of diverted flow, enhancing flow fluidity, or utilizing wind effects and local topography.

Southwestern China contains the largest and most well-developed karst region in the world, and the potentially toxic elements (PTEs) content in the soils of the region is remarkably high. To explore the internal and external control factors and sources of soil PTEs enrichment in this area and to provide a basis for the treatment of PTE pollution, 113 soil samples were collected from Hengxian County, a karst region in Guangxi Province, southwestern China. The importance of eighteen influencing factors including parent material, weathering, physicochemical properties, topography and human activities were quantitatively analyzed by (partial) redundancy analysis. The sources of PTEs were identified using the Pb isotope ratio and absolute principal component score/multiple linear regression (APCS-MLR) model. The contents of all soil PTEs were higher than the corresponding background values of Guangxi soils. The contents in Cu, Zn, Cd, Hg and Pb were the highest in the soil from carbonate rock. The factor group of geological background and weathering explained 26.5% for the accumulation and distribution of soil PTEs and the influence of physicochemical properties was less than 2% but increased to 25.6% through interaction with weathering. Fe (47.1%), Al (42.1%), Mn (22%), chemical index of alteration (12.8%) and clay (11.9%) were the key factors affecting the soil PTEs, while the influence of human activities was weak. Pb isotope ratio and APCS-MLR classified 62.8–74% of soil PTEs as derived from natural sources, whereas 18.23% and 18.95% were derived from industrial activities and agricultural practice/traffic emissions, respectively. The Pb isotope ratio showed that the natural sources account for up to 90% of the Pb in the soil from carbonate rock, the highest contribution among the studied soils. The results of the study can provide background information on the soil PTEs contamination in the karst areas of China and other areas worldwide.

Destructive development of suburban areas in some metropolises has exposed suburban soils to high risk of potentially toxic trace elements (PTEs) enrichment, which also threatens human and ecosystem health. This study investigated the pollution status, sources and spatial patterns of four PTEs (Pb, Cd, Cr and As) in 1805 soil samples collected from the suburbs of Shanghai in 2015. Nineteen potential sources, including: 6 soil property factors, 10 proximity factors and 3 topography factors, were selected to help explain the PTEs aggregation using logistic regression models from global and local perspectives. The statistical results of PTEs concentration revealed that Cd showed the highest pollution risk in local soils, which was followed by As. Soil property was the primary factor affecting the PTEs (except Cr) enrichment, both identified by global models and local models. The local model particularly emphasized the significant correlation between soil property and PTEs in most parts of the outer suburbs and southeastern inner suburbs. Some proximity factors such as distance to district center and water were negatively correlated with Cd pollution and some topography factors such as elevation and slope were closely related to As pollution. It is worth noting that in the coastal areas, especially Chongming Island, there were obvious PTEs depositions in the soil near the estuary. This study helps to identify the sources of anthropogenic contamination and geogenic enrichment of the four PTEs and their spatial patterns, playing an essential role in formulating regional environmental policies for coastal cities.

We evaluated spatial patterns of mercury (Hg) deposition through analysis of foliage and forest floor samples from 45 sites across Adirondack Park, NY. Species-specific differences in foliar Hg were evident with the lowest concentrations found in first-year conifer needles and highest concentrations found in black cherry (Prunus serotina). For foliage and forest floor samples, latitude and longitude were negatively correlated with Hg concentrations, likely because of proximity to emission sources, while elevation was positively correlated with Hg concentrations. Elemental analysis showed moderately strong, positive correlations between Hg and nitrogen concentrations. The spatial pattern of Hg deposition across the Adirondacks is similar to patterns of other contaminants that originate largely from combustion sources such as nitrogen and sulfur. The results of this study suggest foliage can be used to assess spatial patterns of Hg deposition in small regions or areas of varied topography where current Hg deposition models are too coarse to predict deposition accurately.

Atmospheric methane concentrations were quantified along transects in Switzerland, using a mobile laser spectrometer combined with a GPS, to identify their spatio-temporal patterns and their controlling factors. Based on these measurements in complex terrain dominated by agriculture, three main factors were found to be responsible for the diurnal and regional patterns of atmospheric methane: (1) magnitude and distribution of methane sources within the region, (2) efficiency of vertical exchange, and (3) local wind patterns within the complex topography. An autocorrelation analysis of measured methane concentrations showed that nighttime measurements close to the ground provide information about regional sources (up to 8.3 km), while daytime measurements only carry information about sources located up to 240 m away in the upwind fetch. Compared to daytime concentrations, nighttime methane concentrations do also better reflect emissions obtained from a spatially explicit methane emission inventory and allowed the investigation of inconsistencies in this emission inventory.

Shanxi Province is one of the regions in northern China where endemic arsenicosis occurs. In this study, stepwise logistic regression was applied to analyze the statistical relationships of a dataset of arsenic (As) concentrations in groundwaters with some environmental explanatory parameters. Finally, a 2D spatial model showing the potential As-affected areas in this province was created. We identified topography, gravity, hydrologic parameters and remote sensing information as explanatory variables with high potential to predict high As risk areas. The model identifies correctly the already known endemic areas of arsenism. We estimate that the area at risk exceeding 10μgL⁻¹ As occupies approximately 8100km² in 30 counties in the province.

We assessed nitrous oxide (N₂O) emissions at shoulder and foot-slope positions along three sloping sites (1.6–2.1%) to identify the factors controlling the spatial variations in emissions. The three sites received same amounts of total nitrogen (N) input at 170kgNha⁻¹. Results showed that landscape positions had a significant, but not consistent effect on N₂O fluxes with larger emission in the foot-slope at only one of the three sites. The effect of soil inorganic N (NH₄ ⁺+NO₃ ⁻) contents on N₂O fluxes (r²=0.55, p<0.001) was influenced by water-filled pore space (WFPS). Soil N₂O fluxes were related to inorganic N at WFPS>60% (r²=0.81, p<0.001), and NH₄ ⁺ contents at WFPS<60% (r²=0.40, p<0.01), respectively. Differences in WFPS between shoulder and foot-slope correlated linearly with differences in N₂O fluxes (r²=0.45, p<0.001). We conclude that spatial variations in N₂O emission were regulated by the influence of hydrological processes on soil aeration intensity.

Urban tree canopies are a significant sink for atmospheric elemental carbon (EC)––an air pollutant that is a powerful climate-forcing agent and threat to human health. Understanding what controls EC deposition to urban trees is therefore important for evaluating the potential role of vegetation in air pollution mitigation strategies. We estimated wet, dry, and throughfall EC deposition for oak trees at 53 sites in Denton, TX. Spatial data and airborne discrete-return LiDAR were used to compute predictors of EC deposition, including urban form characteristics, and meteorologic and topographic factors. Dry and throughfall EC deposition varied 14-fold across this urban ecosystem and exhibited significant variability from spring to fall. Generalized additive modeling and multiple linear regression analyses showed that urban form strongly influenced tree-scale variability in dry EC deposition: traffic count as well as road length and building height within 100–150 m of trees were positively related to leaf-scale dry deposition. Rainfall amount and extreme wind-driven rain from the direction of major pollution sources were significant drivers of throughfall EC. Our findings indicate that complex configurations of roads, buildings, and vegetation produce “urban edge trees” that contribute to heterogeneous EC deposition patterns across urban systems, with implications for greenspace planning.