Air pollution represents a major health problem in megacities, bringing about 8 million deaths every year. The aim of the study was to evaluate in vivo the ocular and respiratory mucosa biological response after chronic exposure to urban air particles from Buenos Aires (UAP-BA). BALB/c mice were exposed to UAP-BA or filtered air for 1, 6, 9, and 12 months. After exposure, histology, histomorphometry, and IL-6 proinflammatory cytokine level were evaluated in the respiratory and ocular mucosa. Total cell number and differential cell count were determined in the brochoalveolar lavage fluid. In the lung, chronic exposure to UAP-BA induced reduction of the alveolar space, polymorhonuclear cell recruitment, and goblet cell hyperplasia. In the ocular surface, UAP-BA induced an initial mucin positive cells rise followed by a decline through time, while IL-6 level increased at the latest point-time assayed. Our results showed that the respiratory and the ocular mucosas respond differently to UAP-BA. Being that lung and ocular mucosa diseases may be triggered and/or exacerbated by chronic exposure to urban air PM, the inhabitants of Buenos Aires whom are chronically exposed to environmental urban air pollution may be considered a subpopulation at risk. Based on our results, we propose the ocular mucosa as a reliable and more accessible surrogate for pulmonary mucosa environmental toxicity that might also serve as an earlier biomarker for air pollution adverse impact on health.

The air pollution problem in Xingtai and Handan is the focus of public attention. The seasonal gray model with fractional order accumulation is proposed to predict the quarterly concentrations of PM₂.₅, PM₁₀, NO₂, and CO in Xingtai and Handan. The new model has higher forecasting performance and can describe the characteristics of seasonal fluctuation very well. The forecasting results indicated that except for the PM₁₀ in Xingtai that will increase slowly, the other indicators in the two places will decrease. The changes of the air quality indicator concentration in different quarters are obvious, and in the same quarter tend to be stable. Except for CO and NO₂ in some seasons, other indicators are in the state of exceeding the standard. The effect of air pollution control is not good. The governance needs to be further strengthened.

In the present study, a multistage route is proposed for the treatment of biodiesel industry wastewater (BWW) containing around 1000 mg L⁻¹ of total organic carbon (TOC), 3500 mg L⁻¹ of chemical oxygen demand (COD), and 1325 mg L⁻¹ of oil and grease. Initially, BWW aerobic biodegradability was assessed via Zhan-Wellens biodegradability test to confirm the appropriate treatment route. Then, a hybrid moving bed bioreactor (MBBR) system was chosen as the first treatment stage. The hybrid MBBR achieved 69 and 68% removal of COD and TOC removals, respectively, and provided great conditions for biomass growth. The bacterial community present in the hybrid MBBR was investigated by PCR-DGGE and potential biodegraders were identified such as: members of Desulfuromonadales, Nocardioidaceae and Pseudomonadaceae. Since biodegradation in the hybrid MBBR alone was unable to meet quality requirements, advanced oxidation processes, such as Fenton and photo-Fenton, were optimized for application as additional treatment stages. Physicochemical properties and acute toxicity of BWW were analyzed after the multistage routes: hybrid MBBR + Fenton, hybrid MBBR + photo-Fenton and hybrid MBBR + UV-C₂₅₄ₙₘ/H₂O₂. Hybrid MBBR + Fenton or photo-Fenton showed overall COD removal efficiencies greater than 95% and removed acute toxicity, thus being appropriate integrated routes for the treatment of real BWW. Graphical abstract ᅟ

Inorganic and organic constituents present in textile effluents have a noticeable effect on the performance of Fenton processes. However, studies have been focused on simple wastewater matrices that do not offer enough information to stakeholders to evaluate their real potential in large-scale facilities. Chemical auxiliaries, commonly present in textile wastewaters (NaCl = 30 g/L, Na₂CO₃ = 5 g/L, and CH₃COONa = 1 g/L), affect both the economic and environmental performance of the process because they increase the treatment time (from 0.5 to 24 h) and the consumption of H₂SO₄ (657%) and NaOH (148%) during conditioning steps. The life cycle assessment (LCA) performed with the IPCC-2013 method revealed that dyeing auxiliaries increase from 1.06 to 3.73 (252%) the emissions of carbon dioxide equivalent (CO₂-Eqv/m³). Electricity consumption can be considered an environmental hotspot because it represents 60% of the carbon footprint of the Fenton process. Also, the presence of auxiliaries is critical for the process because it results in the increase of the relative impact (between 50 and 80%) in all environmental categories considered by the ReCiPe-2008 method. Chemical auxiliaries increased the costs of the treatment process in 178% (US$2.22/m³) due to the higher energy consumption and the additional reagent requirements. It is worthwhile mentioning that the technical simplicity of the Fenton process and its low economic and environmental costs turn this process into an attractive alternative for the treatment of textile effluents in emerging economies.

High contents of azo dyes and heavy metals enter surface waters with the wastewater from dying and dye-manufacturing industries and pose serious threat to fish. In the present study, changes in the ultra-morphological features of the scale have been evaluated as indicators of the stress of lethal and sublethal concentrations of an azo dye Acid Black-1 (AB-1, CI 20470), zinc (Zn), and their mixture AB-1 + Zn to Labeo rohita. Fish were exposed for 96 h to lethal concentration (LC) causing 0–70% mortality, i.e., LC₀, LC₂₀, LC₅₀, and LC₇₀ of AB-1 (4, 6, 8, and 10 mg/L respectively) and Zn (25, 50, 55, and 60 mg/L respectively) and LC₀, LC₅₀, and LC₇₀ of AB-1 + Zn (2 + 15, 2 + 20, and 2 + 25 mg/L respectively). Subchronic exposures of 150 days were given to 1/12, 1/6, and 1/3 of 96 h LC₅₀ values of AB-1, Zn, and AB-1 + Zn. After each exposure, the fish were kept for a recovery period of 90 days. Breakage of circuli, erosion and breakage of lepidonts, uprooting of tubercles, and disappearance of intercircular teeth were observed in all the fish, after 96 h exposure to AB-1, Zn, and AB-1 + Zn. However, damage to focus and holes were common on the scales of Zn-exposed fish. The mixture AB-1 + Zn was more toxic than either of the two as loss of circuli, lepidonts, and intercircular teeth, and sloughing of surface were observed in the scales after 96 h exposure to 2 + 25 mg/L. Damage at this concentration was more than the damage at 8/10 mg/L AB-1 and 55/60 mg/L Zn. After 150 days of exposure, damage due to sublethal concentrations was more than the damage due to all the concentrations of 96 h exposure. Irregular and sloughed circuli were common at 2 + 1.79 and 2 + 3.59 mg/L AB-1 + Zn. Cracks all over the surface (2 + 7.18 mg/L), calcium projections (2 + 3.59 and 2 + 7.18 mg/L), and holes (2 + 7.18 mg/L) hint towards synergistic toxicity of the mixture. It seems that the present dye and metal formed complexes with collagen and osteoblastic cells of the scale that caused an increase in damage during the post-exposure period. Scales of 2 + 7.18 mg/L AB-1 + Zn exposed fish were completely devoid of the normal architectural pattern on the 90th day of the recovery period. Changes in the ultra-morphology of scales at LC₀ (0% mortality) and sublethal concentrations show that these are early indicators of the stress of minute quantities of dyes and metals in water. This is a first report on the cumulative toxicity of the two most abundant components of textile industry effluents.

Hydrothermal synthesis followed by a calcination step was used to prepare porous Zn₂SnO₄ powders using carbon black as a pore-forming agent. The porous Zn₂SnO₄ was used as a photocatalyst to degrade the Rhodamine B dye from aqueous solution under UV artificial light. X-ray diffraction, N₂ adsorption-desorption isotherms, and UV-Vis diffuse reflectance were used to characterize the material. The addition of pore-forming agent (carbon black) did not change the crystalline structure of Zn₂SnO₄ phase. In addition, increasing the surface area and porosity as well as decreasing the band-gap energy was observed. The combination of these characteristics favored the photodegradation of Rhodamine B, reaching 96% of dye degradation at 15 min of reaction time. In addition, the photocatalyst was active after six cycles of reuse. Therefore, the produced material in this work showed to be a potential photocatalyst to remove Rhodamine B dye from aqueous solution.

Electronic waste (e-waste) is used for all electronic/electrical devices which are no more used. Conventionally, waste management policies are desfighandle the traditional waste. Although e-waste contains toxic materials, however, its management is rarely focused by policy makers; therefore, its negative impact on the global environment, ecosystem, and human health is aggravated. The review outlines the categories of e-waste materials, major pollutants including ferrous/non-ferrous metals, plastics, glass, printed circuit boards, cement, ceramic, and rubber beside, some valuable metals (such as copper, silver, gold, platinum). Toxic elements from e-waste materials, released in the air, water, and soil, include arsenic, cadmium, chromium, mercury, and lead, causing pollution. Although their roles in biological systems are poorly identified, however, they possess significant toxic and carcinogenic potential. It is therefore critical to monitor footprint and device strategies to address e-waste-linked issues from manufacturing, exportation, to ultimate dumping, including technology transmissions for its recycling. This review traces a plausible link among e-waste condition at a worldwide dimension, as far as settlement procedures to keep it secure and carefully monitored when traded. Their fate in the three spheres of the earth, i.e., water, soil, and air, impacts human health. The strategies and regulation to handle e-waste generation at the global level have been discussed. Graphical abstract .

As a result of the widespread use of antibiotics, a large amount of excretions from human and animals, containing antibiotic residues, is discharged into aquatic environments, leading to potential adverse effects on the ecosystems’ health. These residues’ impact on seasonally ice-covered rivers remains under investigated. To understand the environmental fate of antibiotics with high-detection frequencies and concentration levels, sulfamethoxazole, lincomycin, and florfenicol were used as models in the present study. A Level IV fugacity model was established and applied to a seasonally ice-covered river receiving municipal wastewater treatment plant (WWTP) effluents, the Songhua River in Northeast China. Model validation and sensitivity analysis suggested that the fugacity model could successfully simulate the monitoring concentration within an average difference of one logarithmic unit. The advection process played a major role in the transport and attenuation of the antibiotics in the ice-covered river receiving WWTP effluents. The scenario simulation indicated that increasing the targeted antibiotic concentrations in WWTP effluents to μg L⁻¹ could keep the targeted antibiotic concentrations higher than 10 ng L⁻¹ in the receiving river from the WWTP discharge source to 25 km downstream. This finding also demonstrates that the depth of water and ice, as well as flow velocity, play key roles in the fate of antibiotics in the ice-covered river receiving WWTP effluents. To our best knowledge, this is the first major study to combine experimental investigation with modeling to explore the environmental behaviors and fate of antibiotics in such a river.

Pollution caused by heavy metals affects all forms of life. The aim of the study was to determine the content of toxic (Sr, Ni, Pb, V, Cd, U, Rb, As) and essential (Na, K, Ca, Mg, Zn, Cu, Se, Mn, Cr, Mo, Co) metals in the bone and whole blood samples, in regard to clinical means of long- and short-term exposure, respectively. For this purpose, the cortical and trabecular parts of femoral neck, as well as the blood samples, were collected to quantify bone-important metals by inductively coupled plasma (ICP)-based techniques. According to principal component analysis (PCA), the most influential metal discriminating blood samples was Cu, while all other quantified elements were present in higher amounts in the bones. Additionally, trabecular bones (TBs) could be characterized by higher content of Mo, Cr, V, Mn, Co, As, and Ni compared to cortical bones (CBs). Linear discrimination analysis (LDA) was successfully applied to distinguish trabecular bone from the cortical bone. Significant correlation between essential Ca and toxic Sr with other elements was found and discussed. This study provides novel data on the effects of metal pollutants on bone health hazards. The results obtained for investigating metals may serve as a baseline for further clinical investigations in the orthopedic fields.

The use of ultraviolet light in photoreactors for wastewater treatment has become popular as an alternative of known chemical oxidative substances. UV LED light represents cheaper, robust, and versatile alternative to traditional UV lamps. In this study, it was designed and evaluated a photoreactor with an approach of chemical fluid dynamics (CFD) and experimental validation. The evaluation consisted of (1) CFD velocity profile analysis, (2) characterization of the average light distribution with potassium ferrioxalate actinometry, (3) degradation of a typical recalcitrant metallic cyanocomplex Fe(CN)₆³⁻, and (4) scavenger effect analysis in the photodegradation using potassium persulfate. Actinometrical essay concluded that the system was able to receive 1.93 μE/s. The reactor operated under turbulent regime and best result for Fe(CN)₆³⁻ degradation was obtained at 4 h of operation, using 5-W UV-A LEDs, with pH ~ 7 and 10 mM de S₂O₈²⁻. Baffled photoreactor demonstrated to be useful for this type of illumination and wastewater treatment.