The common bean requires high levels of nitrogen (N) to achieve high productivity, which can be supplied, at least partially, by the biological nitrogen fixation (BFN). Two field experiments were carried out in the winter season of 2015 aiming to evaluate the effects of different cover crops, desiccation times and the agronomic performance of the common bean inoculated with rhizobia. The experiments were assembled in a randomized block design with four replications, in a factorial split-plot arrangement with two additional treatments (5x4x2+2). The factors were composed of five cover crops, four desiccation times, two seed inoculation treatments and two additional controls (TN = 90 Kg N ha-1 and T0 = without N and without inoculation). The variables analyzed in the cover crops were dry mass (DM) and total nitrogen (Total-N). With the common bean, the chlorophyll content (CC), the number of nodules (NN), the nodule dry weight (NDW), the shoot dry weight (SDW), the root dry weight (RDW) and the grain yield (GY) were evaluated. The results showed that the agronomic performance of the common bean was not affected by the desiccation times of the cover crops, although the amount of Total-N accumulated by cover crops was influenced by sowing times. Inoculation of the common bean promoted an increase in the NN, NDW, CC and SDW. Higher GY of the common bean was achieved with its cropping after Brachiaria brizantha, Brachiaria ruziziensis, millet and fallow.

RESUMO O feijoeiro-comum requer altos níveis de nitrogênio (N) para alcançar elevadas produtividades, os quais podem ser supridos, ao menos parcialmente, pela fixação biológica de N (FBN). Com o objetivo de avaliar os efeitos de diferentes plantas de cobertura e épocas de dessecação no desempenho agronômico do feijoeiro-comum inoculado com rizóbio, foram conduzidos dois experimentos em campo, na safra de inverno 2015. Os experimentos foram implantados em delineamento de blocos ao acaso com quatro repetições, em esquema fatorial de parcelas sub subdivididas com tratamentos adicionais (5x4x2+2). Os fatores foram: cinco plantas de cobertura, quatro épocas de dessecação, dois tratamentos de inoculação das sementes e duas testemunhas (TN = 90 Kg N ha-1 e T0 = sem N e sem inoculação). As variáveis analisadas nas plantas de cobertura foram massa seca (MS) e nitrogênio total (N-Total). No feijoeiro-comum avaliou-se teor de clorofila (TC), número de nódulos (NN), massa seca de nódulos (MSN), massa seca da parte aérea (MSPA), massa seca de raiz (MSR) e a produção de grãos (PG). Os resultados mostraram que o desempenho agronômico do feijoeiro-comum não foi afetado pelas épocas de dessecação das plantas de cobertura, embora a quantidade de N-Total acumulada pelas plantas de cobertura tenha sido influenciada pela época de semeadura. A inoculação do feijoeiro-comum promoveu aumento do NN e MSN, do TC e da MSPA do feijoeiro-comum. Em Santo Antônio de Goiás obteve-se maior PG do feijoeiro-comum em cultivo após braquiária brizanta, braquiária ruziziensis, milheto e pousio. | ABSTRACT The common bean requires high levels of nitrogen (N) to achieve high productivity, which can be supplied, at least partially, by the biological nitrogen fixation (BFN). Two field experiments were carried out in the winter season of 2015 aiming to evaluate the effects of different cover crops, desiccation times and the agronomic performance of the common bean inoculated with rhizobia. The experiments were assembled in a randomized block design with four replications, in a factorial split-plot arrangement with two additional treatments (5x4x2+2). The factors were composed of five cover crops, four desiccation times, two seed inoculation treatments and two additional controls (TN = 90 Kg N ha-1 and T0 = without N and without inoculation). The variables analyzed in the cover crops were dry mass (DM) and total nitrogen (Total-N). With the common bean, the chlorophyll content (CC), the number of nodules (NN), the nodule dry weight (NDW), the shoot dry weight (SDW), the root dry weight (RDW) and the grain yield (GY) were evaluated. The results showed that the agronomic performance of the common bean was not affected by the desiccation times of the cover crops, although the amount of Total-N accumulated by cover crops was influenced by sowing times. Inoculation of the common bean promoted an increase in the NN, NDW, CC and SDW. Higher GY of the common bean was achieved with its cropping after Brachiaria brizantha, Brachiaria ruziziensis, millet and fallow.

Fruit thinning is the removal of fruitlets in heavy fruit set situations and aims to increase salable fruit sizes, avoid branch breakdown, reduce harvesting costs, and promote a balance between the vegetative and reproductive growth of plants. Furthermore, this procedure may improve coloring, increase soluble solids, and maintain plant vigor. This study aimed to evaluate the effects of fruit thinning in five varieties of lychee (Bengal, American, Mauritius, Sweet Cliff, and WB4), in the conditions of Jaboticabal - São Paulo state (Brazil). The experimental design was a completely randomized design (CRD) with five treatments and seven replications of three plants each. Treatments consisted of fruit thinning intensities characterized by the number of fruit left on terminal branch panicles, being T1: 3 fruits/branch; T2: 6 fruits /branch; T3: 9 fruit/ branch; T4: 12 fruits/branch; T5: no thinning (control plot). Evaluations were made through a colorimetric assay on ripe fruits, besides a physical and chemical analysis for each variety. The treatments affected the response of varieties on each studied variable. The variety “Mauritius” showed interesting physical and chemical characteristics for the consumer market.

RESUMO O raleio consiste na retirada do excesso de frutos e tem como objetivo aumentar o tamanho de frutos comercializáveis, evitar a quebra de ramos, reduzir os custos da colheita e promover um equilíbrio entre a fase vegetativa e a reprodutiva da planta. Além disso, este procedimento pode promover a melhora de coloração, aumento do teor de sólidos solúveis e manter o vigor da planta. Este trabalho teve como objetivo avaliar os efeitos do raleio de frutos em cinco variedades de lichieira (Bengal, Americana, Mauritius, Sweft Cliff e WB4), para as condições do município de Jaboticabal - São Paulo. O delineamento experimental foi inteiramente casualizado (DIC), com 5 tratamentos e 7 repetições, sendo três plantas por repetição. Os tratamentos utilizados foram as intensidades de raleio caracterizadas pelo número de frutos deixados nas panículas do ramo terminal, sendo T1: 3 frutos/ramo; T2: 6 frutos/ramo; T3: 9 frutos/ramo; T4: 12 frutos/ramo; T5: sem raleio (controle). As avaliações foram por meio da colorimetria dos frutos maduros, análises físicas e químicas para cada uma das variedades estudadas. Os tratamentos influenciaram a resposta das variedades em relação às variáveis analisadas. A “Mauritius” apresenta características físicas e químicas interessantes, atendendo as exigências do mercado consumidor. | ABSTRACT Fruit thinning is the removal of fruitlets in heavy fruit set situations and aims to increase salable fruit sizes, avoid branch breakdown, reduce harvesting costs, and promote a balance between the vegetative and reproductive growth of plants. Furthermore, this procedure may improve coloring, increase soluble solids, and maintain plant vigor. This study aimed to evaluate the effects of fruit thinning in five varieties of lychee (Bengal, American, Mauritius, Sweet Cliff, and WB4), in the conditions of Jaboticabal - São Paulo state (Brazil). The experimental design was a completely randomized design (CRD) with five treatments and seven replications of three plants each. Treatments consisted of fruit thinning intensities characterized by the number of fruit left on terminal branch panicles, being T1: 3 fruits/branch; T2: 6 fruits /branch; T3: 9 fruit/ branch; T4: 12 fruits/branch; T5: no thinning (control plot). Evaluations were made through a colorimetric assay on ripe fruits, besides a physical and chemical analysis for each variety. The treatments affected the response of varieties on each studied variable. The variety “Mauritius” showed interesting physical and chemical characteristics for the consumer market.

Early blight (caused by Alternaria tomatophila ) is a major disease of tomato with no resistant cultivars. Thus, it is necessary to identify sources of resistance and productive genotypes for the development of new cultivars. Therefore, this study aimed to evaluate the productive potential of cherry tomato genotypes grown in the summer / fall, the severity of early blight on leaves and the incidence of disease in fruits. The treatments consisted of Carolina tomato genotypes, Cereja Vermelho, CH 152 and CLN1561A. The experimental design consisted of randomized blocks with six replications, and the experimental plot had 16 plants. The following characteristics were evaluated: area under the disease progress curve (AUDPC), average number of microinjuries on the fruits (MF), average number of fruits per bunch (NFC), average number of bunches per plant (NCP), average number of fruits per plant (NFP), average yield, number of fruits with incidence of early blight per plant (NFI) and the severity of early blight in leaves (%). The cherry tomato genotype CH152 showed tolerance to early blight with a smaller area under the disease progress curve, lower severity and fruits with incidence of A. tomatophila were not observed in this genotype. The CH152 had the highest number of fruits per bunch, greater number of bunches per plant, higher number of fruits per plant and higher productivity. This line has great potential of being integrated into breeding programs.

ABSTRACT Early blight (caused by Alternaria tomatophila) is a major disease of tomato with no resistant cultivars. Thus, it is necessary to identify sources of resistance and productive genotypes for the development of new cultivars. Therefore, this study aimed to evaluate the productive potential of cherry tomato genotypes grown in the summer / fall, the severity of early blight on leaves and the incidence of disease in fruits. The treatments consisted of Carolina tomato genotypes, Cereja Vermelho, CH 152 and CLN1561A. The experimental design consisted of randomized blocks with six replications, and the experimental plot had 16 plants. The following characteristics were evaluated: area under the disease progress curve (AUDPC), average number of microinjuries on the fruits (MF), average number of fruits per bunch (NFC), average number of bunches per plant (NCP), average number of fruits per plant (NFP), average yield, number of fruits with incidence of early blight per plant (NFI) and the severity of early blight in leaves (%). The cherry tomato genotype CH152 showed tolerance to early blight with a smaller area under the disease progress curve, lower severity and fruits with incidence of A. tomatophila were not observed in this genotype. The CH152 had the highest number of fruits per bunch, greater number of bunches per plant, higher number of fruits per plant and higher productivity. This line has great potential of being integrated into breeding programs. | RESUMO A pinta preta (Alternaria tomatophila) é uma das principais doenças do tomateiro não havendo cultivares resistentes à doença. Com isso, é necessário identificar fontes de resistência e genótipos produtivos na perspectiva de desenvolvimento de novas cultivares. Logo, objetivou com esse estudo avaliar o potencial produtivo de genótipos de tomateiro cereja cultivados no verão/outono, a severidade da pinta preta nas folhas e a incidência da doença nos frutos. Os tratamentos consistiram dos genótipos de tomateiro Carolina, Cereja Vermelho, CH 152 e CLN1561A. O delineamento experimental foi de blocos ao acaso com seis repetições, sendo a parcela experimental constituída por 16 plantas. Foram avaliadas as seguintes características: área abaixo da curva de progresso da doença (AACPD), número médio de microferimentos nos frutos (MF), número médio de frutos por cacho (NFC), número médio de cachos por planta (NCP), número médio de frutos por planta (NFP), produtividade média, número de frutos com incidência de pinta preta por planta (NFI) e a severidade da pinta preta nas folhas (%). O genótipo de tomateiro cereja CH152 apresentou tolerância à pinta preta com menor área abaixo da curva de progresso da doença, menor severidade e também não foram observados frutos com incidência de A. tomatophila nesse genótipo. O CH152 apresentou o maior número de frutos por cacho, maior número de cachos por planta, maior número de frutos por planta e maior produtividade. Esta linhagem tem grande potencial para ser integrada em programas de melhoramento genético.

Cowpea has great socioeconomic importance in the northeastern part of Pará state. However, in order to provide suitable irrigation management during the dry period this region requires solid information regarding water demand by regional crops. This research aims to determine the water demand, the crop coefficient (Kc) and the uncoupling factor during the different development stages of cowpea in the northeast of Pará. The crop evapotranspiration (ETc) was measured by drainage lysimeters. This information was coupled to the reference evapotranspiration (ETo) to obtain the crop coefficients, which were used to adjust the model function of accumulated degree-days and the leaf area index (LAI). The uncoupling factor was estimated to indicate the factors that control evapotranspiration. The ETc values reached a cumulative total of 267.73 mm ± 10.21 mm during the cowpea cycle. The average value of the uncoupling factor was 0.66. This indicates that the cowpea crop does not fully uncouple from the atmosphere underneath the climatic conditions in northeast Pará. The cowpea Kc values presented averages of 0.8, 1.4 and 0.8 in the vegetative phase, reproductive phase and final stage, respectively. The Gaussian model showed an excellent fit for the estimation of Kc values based on accumulated degree days and the LAI. These amounts differ from others found in the literature. Therefore, it reinforces the necessity for an assessment of crop coefficients under local conditions and for the employment of more precise methods.

ABSTRACT Cowpea has great socioeconomic importance in the northeastern part of Pará state. However, in order to provide suitable irrigation management during the dry period this region requires solid information regarding water demand by regional crops. This research aims to determine the water demand, the crop coefficient (Kc) and the uncoupling factor during the different development stages of cowpea in the northeast of Pará. The crop evapotranspiration (ETc) was measured by drainage lysimeters. This information was coupled to the reference evapotranspiration (ETo) to obtain the crop coefficients, which were used to adjust the model function of accumulated degree-days and the leaf area index (LAI). The uncoupling factor was estimated to indicate the factors that control evapotranspiration. The ETc values reached a cumulative total of 267.73 mm ± 10.21 mm during the cowpea cycle. The average value of the uncoupling factor was 0.66. This indicates that the cowpea crop does not fully uncouple from the atmosphere underneath the climatic conditions in northeast Pará. The cowpea Kc values presented averages of 0.8, 1.4 and 0.8 in the vegetative phase, reproductive phase and final stage, respectively. The Gaussian model showed an excellent fit for the estimation of Kc values based on accumulated degree days and the LAI. These amounts differ from others found in the literature. Therefore, it reinforces the necessity for an assessment of crop coefficients under local conditions and for the employment of more precise methods. | RESUMO O feijão caupi possui grande importância sócioeconômica para o nordeste paraense, porém, a região necessita de informações seguras quanto demanda hídrica, para promover um manejo adequado de irrigação no período considerado mais seco do ano. Assim, o objetivo da pesquisa foi determinar a demanda hídrica, coeficiente da cultura (Kc) e fator de desacoplamento nos diferentes estádios de desenvolvimento do feijão caupi no nordeste paraense. Com a evapotranspiração da cultura (ETc), obtida por meio de lisímetros de drenagem, e a evapotranspiração de referência (ETo) foram obtidos os coeficientes de cultura (Kc), utilizados posteriormente, para ajustar modelos em função dos graus dias acumulados (GD) e índice de área foliar (IAF), o fator de desacoplamento foi estimado para indicar os fatores que estão governando a evapotranspiração. Os valores de ETc atingiram um total acumulado, durante o ciclo do feijão caupi, de 267,73 mm ± 10,21 mm. O valor médio do fator de desacoplamento foi 0,66 indicando que a cultura do feijão-caupi não desacopla totalmente da atmosfera nas condições climáticas do nordeste paraense. O Kc do feijão caupi apresentou valor médio de 0,8, 1,4 e 0,8 na fase vegetativa, fase reprodutiva e estádio final, respectivamente. O modelo Gaussiano apresentou ótimo ajuste para a estimativa dos valores Kc em função dos graus-dia acumulados e do IAF. Tais valores se diferenciam de alguns encontrados na literatura, o que reforça a necessidade de estudos relacionados a consumo hídrico, assim como coeficiente de cultura, em condições locais e por métodos precisos.

Water deficit at certain cotton growth stages can cause severe damage to crop development, affecting physiological processes and reducing reproductive structures, with consequent yield losses. The objective of this study was to evaluate the response of cotton cultivars under water deficit applied at different stages of the crop cycle. We compared the number of bolls per meter, cotton yield, and water use efficiency for eight different cotton cultivars under a water deficit of 15 days. We selected the following growth stages: Emergence (EM), First Square (FS), First Flower (FL), Peak Bloom (PB), and First Open Boll (FOB). The control treatment was irrigated with 100% ETc. The experiment was conducted in Apodi, RN State of Brazil, semiarid region, using a sprinkler irrigation system. The number of bolls per meter, cotton yield, and water use efficiency were influenced by the interaction of cultivars x deficit periods. Lowest values were observed for water suppression in the FL and PB stages. When the water deficit was imposed in the initial stages of growth (EM to FS) or after the FOB stage, the cotton yield reduction was not significant. At the same stage and water deficit, the behavior of the different cultivars was similar. Producers are urged to take this information into account when developing irrigation schemes for cotton crops, thereby avoiding water deficits during the most critical periods of the crop cycle.

RESUMO O déficit hídrico em determinadas fases do ciclo de cultivo do algodoeiro pode causar severos danos, afetando as estruturas reprodutivas, acarretando perda na produtividade. O objetivo deste trabalho foi avaliar a resposta de cultivares de algodoeiro submetidas ao déficit hídrico em diferentes fases do ciclo de cultivo. Comparou-se o número de capulhos por metro, a produtividade e a eficiência no uso da água em oito cultivares de algodoeiro herbáceo, submetidas a déficit hídrico por 15 dias nos estádios: emergência, emissão do primeiro botão floral, emissão da primeira flor, emissão da primeira maçã, abertura do primeiro capulho e a testemunha irrigada com 100% da ETc. O experimento foi instalado no município de Apodi-RN, região Semiárida do Nordeste, em área irrigada por aspersão. O número de capulhos por metro, a produtividade de algodão em caroço e a eficiência de uso da água foram influenciadas pela interação cultivares x déficit hídrico. Os piores resultados foram observados para o déficit hídrico de 15 dias após a emissão da primeira maçã e da primeira flor. Quando o déficit hídrico foi imposto nas fases de crescimento inicial, após a emissão do primeiro botão floral e após a abertura do primeiro capulho, a perda de produtividade não foi significativa. Dentro de um mesmo período de déficit hídrico, as cultivares se comportaram de maneira similar. Os produtores devem levar essa informação em consideração para ouso da irrigação suplementar e para programação das irrigações, evitando que o déficit hídrico ocorra nos períodos mais críticos do ciclo de cultivo. | ABSTRACT Water deficit at certain cotton growth stages can cause severe damage to crop development, affecting physiological processes and reducing reproductive structures, with consequent yield losses. The objective of this study was to evaluate the response of cotton cultivars under water deficit applied at different stages of the crop cycle. We compared the number of bolls per meter, cotton yield, and water use efficiency for eight different cotton cultivars under a water deficit of 15 days. We selected the following growth stages: Emergence (EM), First Square (FS), First Flower (FL), Peak Bloom (PB), and First Open Boll (FOB). The control treatment was irrigated with 100% ETc. The experiment was conducted in Apodi, RN State of Brazil, semiarid region, using a sprinkler irrigation system. The number of bolls per meter, cotton yield, and water use efficiency were influenced by the interaction of cultivars x deficit periods. Lowest values were observed for water suppression in the FL and PB stages. When the water deficit was imposed in the initial stages of growth (EM to FS) or after the FOB stage, the cotton yield reduction was not significant. At the same stage and water deficit, the behavior of the different cultivars was similar. Producers are urged to take this information into account when developing irrigation schemes for cotton crops, thereby avoiding water deficits during the most critical periods of the crop cycle.

Information on the recovering of areas of gravel extraction of the Caatinga biome are scarce. Thus, the objective of this work was to assess the soil fauna as bioindicator of soil quality, evaluating areas with addition of topsoil (WAT) and control areas (CWT) without the addition of topsoil used for forest plantations, which were implemented for recovering gravel extraction areas. A native forest of the Caatinga biome (NFC) was taken as a reference. Ten traps with three replicates were installed in each area, which were evaluated in a randomized block design in split - plot arrangement at the end of the rainy season of different years, 0, 1, 3 and 6 years after the experiment implementation. A total of 45,740 specimens were captured. These specimens were from 36 taxonomic groups. The Acari, Diptera, Entomobryomorpha, Formicidae, Poduromorpha and Symphypleona were the predominant groups in all areas (WAT, CWT and NFC). Nine groups (25% of the total) had restricted occurrence. The fauna richness and diversity were higher in the NFC, followed by the WAT and CWT. The uniformity and total abundance of the soil fauna community showed no defined patterns. The abundance of most groups was inhibited in the treatments evaluated, compared with NFC, however, this adverse effect was more significant in CWT compared with WAT. The CWT and WAT had high similarity and both had very low similarity with NFC. The ecological complexity of soil fauna community was higher in NFC. The soil fauna was efficient as a bioindicator of soil quality, which was higher in WAT, compared with CWT.

RESUMO Atualmente, há poucas informações sobre a recuperação de áreas onde ocorre a extração de piçarra na Caatinga. Objetivou-se avaliar o emprego da fauna edáfica como bioindicadora da qualidade do solo em áreas com e sem a adição de topsoil (CT e ST, respectivamente), em plantios florestais para a recuperação de áreas de extração deste recurso mineral. Considerou-se a mata nativa de Caatinga (MT) como referencial. Foram instaladas 10 armadilhas em três réplicas para cada tratamento, em delineamento em blocos casualizados em esquema de parcelas subdivididas, no final da estação chuvosa,em diferentes épocas (0, 1, 3 e 6 anos depois). Capturou-se um total de 45.740 organismos, distribuídos em 36 grupos taxonômicos, com o predomínio de Acari, Diptera, Entomobryomorpha, Formicidae, Poduromorpha e Symphypleona, em todos os tratamentos (ST, CT, MT). Nove grupos (25% do total) apresentaram ocorrência restrita. Os valores de riqueza e diversidade foram maiores na MT, seguidos do CT e ST. Não houve um padrão definido para a uniformidade e abundância total da comunidade. A maioria dos grupos apresentou inibição na abundância nos tratamentos testados em relação à MT, mas este efeito negativo foi relevante no ST, em comparação com o CT. A similaridade entre ST e CT foi elevada, e muito baixa com a MT. A complexidade ecológica da comunidade da fauna edáfica foi maior na MT. A fauna edáfica funcionou como bioindicadora da qualidade do solo, que foi maior em CT, na comparação com ST. | ABSTRACT Information on the recovering of areas of gravel extraction of the Caatinga biome are scarce. Thus, the objective of this work was to assess the soil fauna as bioindicator of soil quality, evaluating areas with addition of topsoil (WAT) and control areas (CWT) without the addition of topsoil used for forest plantations, which were implemented for recovering gravel extraction areas. A native forest of the Caatinga biome (NFC) was taken as a reference. Ten traps with three replicates were installed in each area, which were evaluated in a randomized block design in split-plot arrangement at the end of the rainy season of different years, 0, 1, 3 and 6 years after the experiment implementation. A total of 45,740 specimens were captured. These specimens were from 36 taxonomic groups. The Acari, Diptera, Entomobryomorpha, Formicidae, Poduromorpha and Symphypleona were the predominant groups in all areas (WAT, CWT and NFC). Nine groups (25% of the total) had restricted occurrence. The fauna richness and diversity were higher in the NFC, followed by the WAT and CWT. The uniformity and total abundance of the soil fauna community showed no defined patterns. The abundance of most groups was inhibited in the treatments evaluated, compared with NFC, however, this adverse effect was more significant in CWT compared with WAT. The CWT and WAT had high similarity and both had very low similarity with NFC. The ecological complexity of soil fauna community was higher in NFC. The soil fauna was efficient as a bioindicator of soil quality, which was higher in WAT, compared with CWT.

The aim of this study was to evaluate physiological quality in seeds of sweet sorghum grown under semi-arid conditions, and to determine the age of physiological maturity of the seeds as a function of the foliar application of potassium silicate. The experiment was carried out at the Curu Valley Experimental Farm, in Pentecoste in the state of Ceará, during the rainy seasons of 2014 and 2015. The BRS 506 and BRS 511 varieties were used, under foliar fertilisation with potassium silicate at doses of 500, 1000 and 1500 mL.ha -1, in addition to the control lots (with no application); harvesting was at four periods, 30, 37, 44 and 51 days after full bloom (DAB). The percentage and speed of germination were evaluated, together with the accelerated ageing test and seedling growth. The seeds presented greater than 90% germination from 37 DAB, reaching high seedling vigour at 51 DAB. Foliar fertilisation with potassium silicate under the conditions of the experiment resulted in an increase in the physiological quality of the seeds. The BRS 506 and BRS 511 cultivars displayed the highest physiological quality between 49 and 53 DAF.

RESUMO O objetivo deste trabalho foi avaliar a qualidade fisiológica das sementes de sorgo sacarino cultivado em condição semiárida, procurando-se determinar a época de maturidade fisiológica das sementes em função da aplicação foliar com silicato de potássio. O experimento foi conduzido na Fazenda Experimental Vale do Curu, Pentecoste - CE no período de chuvas dos anos de 2014 e 2015. Utilizaram-se as variedades BRS 506 e BRS 511 sob adubação foliar com silicato de potássio nas doses 500; 1000 e 1500 mL.ha -1, além das parcelas controle (sem aplicação) e com colheita realizada em quatro épocas (30, 37, 44 e 51 dias após a plena floração (DAF)). Foram avaliados as porcentagens e velocidade de germinação, o teste de envelhecimento acelerado e o crescimento de plântulas. As sementes obtiveram germinação acima de 90% a partir dos 37 dias DAF, atingindo alto vigor de plântulas aos 51 dias APF. A adubação foliar com silicato de potássio nas condições aplicadas promoveu acréscimo na qualidade fisiológica das sementes. As cultivares BRS 506 e BRS 511 apresentam o máximo de qualidade fisiológica entre 49 e 53 dias DAF. | ABSTRACT The aim of this study was to evaluate physiological quality in seeds of sweet sorghum grown under semi-arid conditions, and to determine the age of physiological maturity of the seeds as a function of the foliar application of potassium silicate. The experiment was carried out at the Curu Valley Experimental Farm, in Pentecoste in the state of Ceará, during the rainy seasons of 2014 and 2015. The BRS 506 and BRS 511 varieties were used, under foliar fertilisation with potassium silicate at doses of 500, 1000 and 1500 mL.ha -1, in addition to the control lots (with no application); harvesting was at four periods, 30, 37, 44 and 51 days after full bloom (DAB). The percentage and speed of germination were evaluated, together with the accelerated ageing test and seedling growth. The seeds presented greater than 90% germination from 37 DAB, reaching high seedling vigour at 51 DAB. Foliar fertilisation with potassium silicate under the conditions of the experiment resulted in an increase in the physiological quality of the seeds. The BRS 506 and BRS 511 cultivars displayed the highest physiological quality between 49 and 53 DAF.

The mombin tree (Spondias mombin L.) is found in almost all regions of Brazil. Fresh and processed mombin fruits are increasingly demanded by the market. The objective of this work was to evaluate the post-harvest characteristics of mombin fruits coated with cassava starch and PVC film. Fruits from the mombin cultivar Lagoa-Redonda were harvested at physiological maturity in Limoeiro do Norte, State of Ceará, transported to the Chemistry Laboratory of the Ceará Federal Institute, Limoeiro do Norte campus, and stored for 8 days at 29.7°C and 59% of relative humidity. A completely randomized experimental design in a 3x5 factorial arrangement was used, with three coating types (control, cassava starch at 3%, and cassava starch at 3% combined with PVC film) and five storage times (0, 2, 4, 6 and 8 days), four replicates and five fruits per plot. The fruit skin color, external appearance, soluble solids (SS), titratable acidity (TA), SS/TA ratio and weight loss were evaluated. The PVC film was effective in maintaining the fruit external appearance and decreasing weight loss. The use of cassava starch was not as efficient as the PVC film for conserving mombin fruits. The post-harvest life of fruits was 8 days for those treated with cassava starch or cassava starch combined with PVC film, and 6 days for the control.

RESUMO A cajazeira é encontrada em quase todas as Regiões do Brasil vem apresentando crescente demanda de frutos in natura e produtos processados. Este trabalho teve como objetivo avaliar o comportamento pós-colheita de frutos de cajá recobertos com fécula de mandioca e filme PVC. Para realização deste trabalho utilizaram-se frutos da cajazeira do genótipo ‘Lagoa Redonda’ colhidos em Limoeiro do Norte-CE em maturação fisiológica. Em seguida, os frutos foram transportados ao Laboratório de Química do IFCE Campus Limoeiro do Norte e armazenados por 8 dias a 29,7 ºC e 59% de UR. O delineamento experimental foi o inteiramente casualizado em esquema fatorial 3 x 5, com três tipos de revestimento (controle, fécula de mandioca a 3 % e fécula de mandioca a 3 % associada ao filme de PVC) e cinco tempos de armazenamento (0,2, 4, 6 e 8 dias), com quatro repetições de cinco frutos por parcela. Avaliou-se a coloração da casca, aparência externa, teores de sólidos solúveis e de acidez titulável, relação SS/AT e a perda de massa. O uso do filme plástico foi eficiente na conservação da aparência externa e controle da perda de massa. O uso da fécula de mandioca não se mostrou tão eficiente quanto o filme plástico na conservação de cajás. A vida útil pós -colheita dos frutos foi de 8 dias para os tratados com fécula de mandioca ou fécula de mandioca associada ao PVC e de 6 dias para o controle. | ABSTRACT The mombin tree (Spondias mombin L.) is found in almost all regions of Brazil. Fresh and processed mombin fruits are increasingly demanded by the market. The objective of this work was to evaluate the post-harvest characteristics of mombin fruits coated with cassava starch and PVC film. Fruits from the mombin cultivar Lagoa-Redonda were harvested at physiological maturity in Limoeiro do Norte, State of Ceará, transported to the Chemistry Laboratory of the Ceará Federal Institute, Limoeiro do Norte campus, and stored for 8 days at 29.7°C and 59% of relative humidity. A completely randomized experimental design in a 3x5 factorial arrangement was used, with three coating types (control, cassava starch at 3%, and cassava starch at 3% combined with PVC film) and five storage times (0, 2, 4, 6 and 8 days), four replicates and five fruits per plot. The fruit skin color, external appearance, soluble solids (SS), titratable acidity (TA), SS/TA ratio and weight loss were evaluated. The PVC film was effective in maintaining the fruit external appearance and decreasing weight loss. The use of cassava starch was not as efficient as the PVC film for conserving mombin fruits. The post-harvest life of fruits was 8 days for those treated with cassava starch or cassava starch combined with PVC film, and 6 days for the control.

The use of chemical seed treatment is an important tool in the protection of seedlings and has contributed to the increase of rice yield (Oryza sativa L.). The objective of this study was to evaluate the physiological quality and quantify the retention of chemical products in rice seeds treated with insecticide and fungicide coated with polymers. Six seed treatments were used: control, phytosanitary treatment and phytosanitary treatment and coating with the polymers, Florite 1127®, GV5® Solid Resin, Polyseed CF® and VermDynaseed®. The physiological quality was evaluated by the test of germination and vigor by first count tests, germination speed index, shoot length, radicle length, seedling dry mass and sand emergence. To determine the retention of the active ingredients metalaxyl-M and thiamethoxam, an equipment called extractor was used. The experiment was organized in a completely randomized design (DIC) and the averages were separated by the Scott Knott test (p≤0.05). Seed treatment with the fungicide and insecticide, coated with the polymers, Florite 1127®, Solid Resin GV5®, Polyseed CF® and VermDynaseed®, did not affect the physiological quality of rice seeds. Solid Resin GV5®, Polyseed CF® and VermDynaseed® polymers were efficient at retaining thiamethoxam in the rice seeds, preventing some of the active ingredients of the insecticide from being leached through the sand columns immediately after the simulated pluvial precipitation.

ABSTRACT The use of chemical seed treatment is an important tool in the protection of seedlings and has contributed to the increase of rice yield (Oryza sativa L.). The objective of this study was to evaluate the physiological quality and quantify the retention of chemical products in rice seeds treated with insecticide and fungicide coated with polymers. Six seed treatments were used: control, phytosanitary treatment and phytosanitary treatment and coating with the polymers, Florite 1127®, GV5® Solid Resin, Polyseed CF® and VermDynaseed®. The physiological quality was evaluated by the test of germination and vigor by first count tests, germination speed index, shoot length, radicle length, seedling dry mass and sand emergence. To determine the retention of the active ingredients metalaxyl-M and thiamethoxam, an equipment called extractor was used. The experiment was organized in a completely randomized design (DIC) and the averages were separated by the Scott Knott test (p≤0.05). Seed treatment with the fungicide and insecticide, coated with the polymers, Florite 1127®, Solid Resin GV5®, Polyseed CF® and VermDynaseed®, did not affect the physiological quality of rice seeds. Solid Resin GV5®, Polyseed CF® and VermDynaseed® polymers were efficient at retaining thiamethoxam in the rice seeds, preventing some of the active ingredients of the insecticide from being leached through the sand columns immediately after the simulated pluvial precipitation. | RESUMO O uso do tratamento químico de sementes é uma importante ferramenta na proteção de plântulas e tem contribuído com a elevação da produtividade de arroz (Oryza sativa L.). Objetivou-se avaliar a qualidade fisiológica e quantificar a retenção de produtos químicos em sementes de arroz tratadas com inseticida e fungicida recobertas com polímeros. Foram utilizados seis tratamentos de sementes: controle, tratamento fitossanitário e tratamento fitossanitário e recobrimento com os polímeros, Florite 1127®, Resina Sólida GV5®, Polyseed CF® e o VermDynaseed®. A qualidade fisiológica foi avaliada pelo teste de germinação e vigor pelos testes de primeira contagem, índice de velocidade de germinação, comprimento de parte aérea, comprimento de radícula, massa seca de plântulas e emergência em areia. Para determinar a retenção dos ingredientes ativos metalaxil-M e thiamethoxam, utilizou-se equipamento denominado extrator. O experimento foi organizado no delineamento inteiramente casualizado (DIC) e as médias foram separadas pelo Scott Knott (p≤0,05).O tratamento de sementes com o fungicida e inseticida, recobertos com os polímeros,Florite 1127®, ResinSolid GV5®, Polyseed CF® e o VermDynaseed®, não afetaram a qualidade fisiológica de sementes de arroz. Os polímeros ResinSolid GV5®, Polyseed CF® e o VermDynaseed® foram eficientes na retenção do thiamethoxam junto às sementes de arroz, impedindo que parte do ingrediente ativo do inseticida fosse lixiviado, através das colunas de areia, logo após a precipitação pluvial simulada.