Electrolyzed water (EW) is gaining popularity as a sanitizer in the food industries of many countries. By electrolysis, a dilute sodium chloride solution dissociates into acidic electrolyzed water (AEW), which has a pH of 2 to 3, an oxidationreduction potential of >1,100 mV, and an active chlorine content of 10 to 90 ppm, and basic electrolyzed water (BEW), which has a pH of 10 to 13 and an oxidation-reduction potential of -800 to -900 mV. Vegetative cells of various bacteria in suspension were generally reduced by >6.0 log CFU/ml when AEW was used. However, AEW is a less effective bactericide on utensils, surfaces, and food products because of factors such as surface type and the presence of organic matter. Reductions of bacteria on surfaces and utensils or vegetables and fruits mainly ranged from about 2.0 to 6.0 or 1.0 to 3.5 orders of magnitude, respectively. Higher reductions were obtained for tomatoes. For chicken carcasses, pork, and fish, reductions ranged from about 0.8 to 3.0, 1.0 to 1.8, and 0.4 to 2.8 orders of magnitude, respectively. Considerable reductions were achieved with AEW on eggs. On some food commodities, treatment with BEW followed by AEW produced higher reductions than did treatment with AEW only. EW technology deserves consideration when discussing industrial sanitization of equipment and decontamination of food products. Nevertheless, decontamination treatments for food products always should be considered part of an integral food safety system. Such treatments cannot replace strict adherence to good manufacturing and hygiene practices.

Engineered water nanostructures (EWNS) synthesized utilizing electrospray and ionization of water, have been, recently, shown to be an effective, green, antimicrobial platform for surface and air disinfection, where reactive oxygen species (ROS), generated and encapsulated within the particles during synthesis, were found to be the main inactivation mechanism. Herein, the antimicrobial potency of the EWNS was further enhanced by integrating electrolysis, electrospray and ionization of de-ionized water in the EWNS synthesis process. Detailed physicochemical characterization of these enhanced EWNS (eEWNS) was performed using state-of-the-art analytical methods and has shown that, while both size and charge remain similar to the EWNS (mean diameter of 13 nm and charge of 13 electrons), they possess a three times higher ROS content. The increase of the ROS content as a result of the addition of the electrolysis step before electrospray and ionization led to an increased antimicrobial ability as verified by E. coli inactivation studies using stainless steel coupons. It was shown that a 45-min exposure to eEWNS resulted in a 4-log reduction as opposed to a 1.9-log reduction when exposed to EWNS. In addition, the eEWNS were assessed for their potency to inactivate natural microbiota (total viable and yeast and mold counts), as well as, inoculated E. coli on the surface of fresh organic blackberries. The results showed a 97% (1.5-log) inactivation of the total viable count, a 99% (2-log) reduction in the yeast and mold count and a 2.5-log reduction of the inoculated E. coli after 45 min of exposure, without any visual changes to the fruit. This enhanced antimicrobial activity further underpins the EWNS platform as an effective, dry and chemical free approach suitable for a variety of food safety applications and could be ideal for delicate fresh produce that cannot withstand the classical, wet disinfection treatments.

To determine microbial populations and their viability, methods assessing colonies formed and turbidity are generally used. However, these methods require a long incubation time. Thus, a rapid colorimetric microbial viability assay based on the reduction of the tetrazolium salt WST-8 via 2-methyl-1,4-naphthoquinone as an electron mediator was developed. The applicability of the assay for susceptibility testing of various bacteria to antibiotics, screening of antimicrobial substances, determination of water-soluble vitamins, and differentiation of Gram-positive and -negative bacteria was investigated. Good agreement was observed between results with the WST-8 colorimetric method and those obtained using conventional methods. The present assay method was superior to the conventional methods with respect to the overall rapidity, accuracy and convenience.

Plasma-activated water (PAW), the water or solutions treated with atmospheric cold plasma, is an eco-friendly technique with minimal changes in food products, making it a befitting alternative to traditional disinfection methods. Due to its potential microbicidal properties, PAW has been receiving increasing attention for applications in the food, agricultural, and biomedical fields. In this article, we aimed at presenting an overview of recent studies on the generation methods, physicochemical properties, and antimicrobial activity of PAW, as well as its application in the food industry. Specific areas were well discussed including microbial decontamination of food products, reduction of pesticide residues, meat curing, sprouts production, and disinfection of food contact materials. In addition, the factors influencing PAW efficiency were also well illustrated in detail, such as discharge parameters, types and amounts of microorganisms, characteristics of the liquid solution and food products, and treatment time. Moreover, the strategies to improve the efficacy of PAW were also presented in combination with other technologies. Furthermore, the salient drawbacks of this technology were discussed and the important areas for future research were also highlighted. Overall, the present review provides important insights for the application of PAW in the food industry.

The potential isolation of bio-active polysaccharides from bay tree pruning waste was studied using sequential subcritical water extraction using different time-temperature combinations. The extracted polysaccharides were highly enriched in pectins while preserving their high molecular mass (10–100 kDa), presenting ideal properties for its application as additive in food packaging. Pectin-enriched chitosan films were prepared, improving the optical properties (≥95% UV-light barrier capacity), antioxidant capacity (˃95% radical scavenging activity) and water vapor permeability (≤14 g·Pa⁻¹·s⁻¹·m⁻¹·10⁻⁷) in comparison with neat chitosan-based films. Furthermore, the antimicrobial activity of chitosan was maintained in the hybrid films. Addition of 10% of pectins improved mechanical properties, increasing the Young's modulus 12%, and the stress resistance in 51%. The application of pectin-rich fractions from bay tree pruning waste as an additive in active food packaging applications, with triple action as antioxidant, barrier, and antimicrobial has been demonstrated.

The synergistic antimicrobial effects of plasma-processed air (PPA) and plasma-treated water (PTW), which are indirectly generated by a microwave-induced non-atmospheric pressure plasma, were investigated with the aid of proliferation assays. For this purpose, microorganisms (Listeria monocytogenes, Escherichia coli, Pectobacterium carotovorum, sporulated Bacillus atrophaeus) were cultivated as monocultures on specimens with polymeric surface structures. Both the distinct and synergistic antimicrobial potential of PPA and PTW were governed by the plasma-on time (5–50 s) and the treatment time of the specimens with PPA/PTW (1–5 min). In single PTW treatment of the bacteria, an elevation of the reduction factor with increasing treatment time could be observed (e.g., reduction factor of 2.4 to 3.0 for P. carotovorum). In comparison, the combination of PTW and subsequent PPA treatment leads to synergistic effects that are clearly not induced by longer treatment times. These findings have been valid for all bacteria (L. monocytogenes > P. carotovorum = E. coli). Controversially, the effect is reversed for endospores of B. atrophaeus. With pure PPA treatment, a strong inactivation at 50 s plasma-on time is detectable, whereas single PTW treatment shows no effect even with increasing treatment parameters. The use of synergistic effects of PTW for cleaning and PPA for drying shows a clear alternative for currently used sanitation methods in production plants. Highlights: Non-thermal atmospheric pressure microwave plasma source used indirect in two different modes—gaseous and liquid; Measurement of short and long-living nitrite and nitrate in corrosive gas PPA (plasma-processed air) and complex liquid PTW (plasma-treated water); Application of PTW and PPA in single and combined use for biological decontamination of different microorganisms.

Biopolymers of gellan gum (G), 2-hydroxyethyl cellulose (HEC), and lignin (L)-based binary and ternary sustainable composites were prepared for food packaging and biomedical application. The composite films were flexible and transparent or translucent with slight brown in color. The incorporation of lignin considerably improved the thermal and mechanical and hydrophobic properties of the composite films. The addition of 10 wt% of lignin to the composites increased the tensile strength by 54.3% and 59.2% respectively. The prepared lignin-based composite films showed high ultraviolet (UV) protection, with almost 100% protection against UVB (280–320 nm) and 90% against UVA (320–400 nm). The surface hydrophobicity of the composite films increased with the addition of lignin. The binary and ternary composites containing 1, 5, and 10 wt% lignin exhibited excellent radical scavenging activities. The gellan gum/HEC/lignin based composite films achieved the best biocompatibility. The obtained composites showed efficient antioxidant and non-cytotoxic activities, although there was no remarkable antimicrobial activity.