Arsenic is a toxic metalloid of global concern. It usually originates geogenically but can be intensified by human activities such as applications of pesticides and wood preservatives, mining and smelting operations, and coal combustion. Arsenic-contaminated food is a widespread problem worldwide. Data derived from population-based studies, clinical case series, and case reports relating to ingestion of inorganic arsenic in drinking water, medications, or contaminated food or beverages show the capacity of arsenate and arsenite to adversely affect multiple organ systems. Chronic arsenic poisoning can cause serious health effects including cancers, melanosis (hyperpigmentation or dark spots, and hypopigmentation or white spots), hyperkeratosis (hardened skin), restrictive lung disease, peripheral vascular disease (blackfoot disease), gangrene, diabetes mellitus, hypertension, and ischemic heart disease.

Diet and drinking water are suggested to be major exposure pathways for perfluoroalkyl substances (PFASs). In this study, food items and water from Faroe Islands sampled in 2011/2012 were analyzed for 11 perfluoroalkyl carboxylic acids (PFCAs) and 4 perfluoroalkane sulfonic acids (PFSAs). The food samples included milk, yoghurt, crème fraiche, potatoes, fish, and fish feed, and the water samples included surface water and purified drinking water. In total, nine PFCAs and four PFSAs were detected. Generally, the levels of PFAS were in the lower picogram per gram range. Perfluorobutanoic acid was a major contributor to the total PFASs concentration in water samples and had a mean concentration of 750 pg/L. Perfluoroundecanoic acid (PFUnDA) was predominating in milk and wild fish with mean concentrations of 170 pg/g. Perfluorooctane sulfonic acid (PFOS) was most frequently detected in food items followed by PFUnDA, perfluorononanoic acid, and perfluorooctanoic acid (PFOA). Levels of PFUnDA and PFOA exceeded those of PFOS in milk and fish samples. Prevalence of long-chain PFCAs in Faroese food items and water is confirming earlier observations of their increase in Arctic biota. Predominance of short-chain and long-chain homologues indicates exposure from PFOS and PFOA replacement compounds.

For the first time, alginate polymer has been applied to prevent dyes from leaching out of colorimetric oxygen indicator films, which enable people to notice the presence of oxygen in the package in an economic and simple manner. The dye-based oxygen indicator film suffers from dye leaching upon contact with water. In this work, UV-activated visual oxygen indicator films were fabricated using thionine, glycerol, P25 TiO2, and zein as a redox dye, a sacrificial electron donor, UV-absorbing semiconducting photocatalyst, and an encapsulation polymer, respectively. When this zein-coated film was immersed in water for 24h, the dye leakage was as high as 80.80±0.45%. However, introduction of alginate (1.25%) as the coating polymer considerably diminished the dye leaching to only 5.80±0.06%. This is because the ion-binding ability of alginate could prevent the cation dye from leaching into water. This novel water-resistant UV-activated oxygen indicator was also successfully photo-bleached and regained colour fast in the presence of oxygen.

1. The effects on food intake and weight gain of offering broiler chickens (2 to 7 weeks of age) dry food, wet food, wet food containing whey, whey as drinking liquid and combinations of two of these were studied in 5 experiments. 2. Wet feed generally improved both weight gain and feed efficiencies significantly. Feeding whey also improved weight gain and feed conversion efficiency, but whey offered as a drinking fluid had an adverse effect on broiler performance. 3. When whey was offered both as drinking liquid and added to the food it had a deleterious effect. 4. When whey was offered from 4 or 6 weeks of age, it had a better effect than when offered from 2 weeks of age. 5. There was better performance when whey in the drinking water was diluted and/or offered on alternate days or half-days. 6. Broilers allowed to choose between wet and dry feed when water was freely available chose mostly dry feed; in the absence of drinking water they chose mostly wet food. Birds offered water and liquid whey avoided whey completely. 7. It is concluded that whey can be used in diets for broiler chickens by incorporating it in the food as long as drinking water is offered ad libitum. Whey may be offered as a drink if the food is mixed with 1.8 times its weight of water but it is better to dilute the whey with an equal volume of water whether it is added to food or given as drink. Good results can also be obtained when undiluted whey is offered alternately with water, either in half-day or full-day periods.

The thermal reaction between cysteine and furfural was investigated at 65 degrees C in five-component food grade oil/water (O/W) microemulsions of R-(+)-limonene/ethanol, EtOH/water/propylene glycol, PG/Tween 60 as apart of a systematic study on the generation of aroma compounds by utilizing structured W/O and O/W fluids. The furfural-cysteine reaction led to the formation of unique aroma compounds such as 2-furfurylthiol (FFT), 2-(2-furanyl)thiazolidine (main reaction product), 2-(2-furanyl)-thiazoline, and N-(2-mercaptovinyl)-2-(2-furanyl)thiazolidine. These products were determined and characterized by GC-MS. Enhancement in flavor formation is termed "microemulsion catalysis". The chemical reaction occurs preferably at the interfacial film, and therefore a pseudophase model was assumed to explain the enhanced flavor formation. The product internal composition is dictated by process conditions such as temperature, time, pH, and mainly the nature of the interface. Increasing water/PG ratio leads to a dramatic increase in the initial reaction rate (V0). V0 increased linearly as a function of the aqueous phase content, which could be due to the increase in the interfacial concentration of furfural. Microemulsions offer a new reaction medium to produce selective aroma compounds and to optimize their formation.

A new electrochemical adsorptive stripping voltammetry method was developed for the determination of trace amounts of copper in food and water samples. The study of electrochemical behavior of Cu ion indicated that Cu(II) and Schiff base formed a complex in H3BO4-NaOH buffer solution (pH = 7.25). An accumulation potential of -100 mV (vs Ag/AgCl) was applied while the solution was stirred for 60 s. The response curve was recorded by scanning the potential, and the peak current of -0.31 V (vs Ag/AgCl) was recorded. The peak current and concentration of copper accorded with linear relationship in the range of 0.04-120 ng mL(-1). The relative standard deviation (for 12 ng mL(-1) of copper) was 1.73 %, and the detection limit was 0.007 ng mL(-1). The possible interference of some common ions was studied. The proposed method was applied to the determination of copper in water, rice, wheat, tea, milk, and tomato with satisfactory results.

The objective of the study reported here was to investigate three factors that may affect the amounts of water consumed and urine excreted by a rat in the metabolism cage: water dilution, housing, and food. Young F344/N rats (eight per group) were used for all experiments. Food was withheld from rats before each 16-h urine collection, then rats were transferred into a metabolism cage. For trial A (water dilution), urine was collected from rats supplied with dyed water (0.05%,vol/vol). This was repeated three times over a 2-week period. Dye in water or urine was quantified, using a spectrophotometer. For trial B (housing), rats were individually housed in wire cages for 3 weeks before the first urine collection. Then they were group housed in the solid-bottom cage (four per cage). After 2 weeks of acclimation, urine collection was repeated. For trial C (food), one group of rats was provided with food, the other was not, during urine collection. About 8% of urine samples of small volume (less than or equal to 3 ml) from trial A were contaminated with drinking water up to 13% of volume. The average urine volume associated with individual housing was approximately twice as large as that associated with group housing. When food was provided during urine collection, rats consumed similar amounts of water but excreted significantly smaller amounts of urine than did rats without food. It was concluded that water dilution of a urine sample from a sipper bottle is relatively small; rats individually housed in wire caging before urine collection can consumed and excrete a larger quantity of water, compared with rats group housed in solid-bottom cages: and highly variable urine volumes are, in part, associated with lack of access to food during urine collection.

: The influence of temperature (T) and water activity (a w) on the growth rate (μ) of seven moulds (Alternaria alternata, Aspergillus flavus, Cladosporium cladosporioides, Mucor racemosus, Penicillium chrysogenum, Rhizopus oryzae and Trichoderma harzianum) was assessed in suboptimal conditions. Firstly, the dependence of fungal growth on temperature, at a w 0.99, was modelled through an approach described previously for bacteria. A dimensionless growth rate variable: μ dᵢₘα=μ/μ ₒₚₜα depended on the following normalised temperature: T dᵢₘ=(T−T ₘᵢₙ)/(T ₒₚₜ− T ₘᵢₙ) according to a power function: μ dᵢₘα=[T dᵢₘ] ᵅ , where α was an exponent to be estimated. Secondly, the same approach was used to describe the influence of a w on fungal growth, at the respective optimum temperatures for each mould. Similarly, μ dᵢₘᵦ=μ/μ ₒₚₜᵦ depended on the following normalised water activity: a wdᵢₘ=(a w−a wₘᵢₙ)/(a wₒₚₜ−a wₘᵢₙ) according to a power function: μ dᵢₘᵦ=[a wdᵢₘ]ᵝ. Results show: (i) for each mould, the α-value is significantly less than the β-value, confirming that water activity has a greater influence than temperature on fungal development; (ii) the α-values and the β-values depend on the mould; (iii) the α-value is less than 1 for the mesophilic mould A. flavus, whereas the other moulds are characterised by higher α-values ranging from 1.10 to 1.54; (iv) the mesophilic A. flavus exhibits a low β-value, 1.50, compared to the hydrophilic T. harzianum, β=2.44, while β-values are within the range (1.71–2.37) for the other moulds. Journal of Industrial Microbiology & Biotechnology (2002) 28, 311–315 DOI: 10.1038/sj/jim/7000248

Microemulsions based on five-component mixtures for food applications and improved oil solubilization have been studied. The compositions included water, oil phase [such as R(+)-limonene and medium-chain triglycerides (MCT)], short-chain alcohols (such as ethanol), polyols (propylene glycol and glycerol), and several surfactants and their corresponding mixtures (nonionic, such as ethoxylated sorbitan esters, polyglycerol esters, sugar ester, and anionic, such as phosphatidylcholine). The phase behavior of these systems is discussed with respect to the influence of polyols and short-chain alcohols on the degree of solubilization of oils in the aqueous phase. The alcohol and polyols modify the interfacial spontaneous curvature and the flexibility of the surfactant film, enhancing the oil solubilization capacity of the microemulsions. The solubilization of R(+)-limonene was dramatically improved in the presence of the alcohol and polyols, whereas the improvement of solubilization for triglycerides containing MCT was less pronounced. In some systems high oil solubilization was achieved, and some of them can be easily diluted to infinity both with the aqueous phase and with the oil phase. Viscosity measurements along selected dilution lines [characterized by a single continuous microemulsion region starting from a pseudo binary solution (surfactant/oil phase) to the microemulsion (water/polyol corner)] indicate that at a certain composition the system inverts from a W/O to an O/W microemulsion.

Adsorption isotherms of 3 selected paper-based packaging materials, that is, vegetable parchment (VP) paper, Kraft paper, and solid-bleached-sulfate (SBS) paperboard, were determined at 3 different temperatures (25, 40, and 50 °C). The GAB isotherm model was found to fit adequately for describing experimental adsorption isotherm data for the paper samples. The monolayer moisture content of the paper samples decreased with increase in temperature, which is in the range of 0.0345 to 0.0246, 0.0301 to 0.0238, and 0.0318 to 0.0243 g water/g solid for the MG paper, the Kraft paper, and the SBS paperboard, respectively. The net isosteric heats of sorption (qst) for the paper samples decreased exponentially with increase in moisture content after reaching the maximum values of 18.51, 27.39, and 26.80 kJ/mol for the VP paper, the Kraft paper, and the SBS paperboard, respectively, at low-moisture content. The differential enthalpy and entropy of 3 paper samples showed compensation phenomenon with the isokinetic temperature of 399.7 K indicating that water vapor had been adsorbed onto the paper samples with the same mechanism. Depending on the paper material, tensile strength of paper samples was affected by moisture content.