In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil.

The water activity, pH and other compositional parameters such as the moisture, fat and NaCl contents of various food emulsions were determined: butters, margarine (W/0) and mayonnaises (O/W). Water activity was determined by a gravimetric method (PEC procedure) and an instrumental method (dew-point hygrometer). The mean a(w) values obtained for the samples assayed were 0.904 +/- 0.050 (butters), 0.914 +/- 0.028 (margarines) and 0.947 +/- 0.013 (mayonnaises). The a(w) of the butter and margarine samples could be predicted with an error less than 0.02 units from the NaCl content of their aqueous phase (m) by using the following simple linear regression equation: a(w) = 0.954 - 0.036m. This equation could not be used to predict the a(w) of the mayonnaises, which, however, were obtained by using the Chen equation for mixtures of solutes.

Electrolyzed water (EW) is gaining popularity as a sanitizer in the food industries of many countries. By electrolysis, a dilute sodium chloride solution dissociates into acidic electrolyzed water (AEW), which has a pH of 2 to 3, an oxidationreduction potential of >1,100 mV, and an active chlorine content of 10 to 90 ppm, and basic electrolyzed water (BEW), which has a pH of 10 to 13 and an oxidation-reduction potential of -800 to -900 mV. Vegetative cells of various bacteria in suspension were generally reduced by >6.0 log CFU/ml when AEW was used. However, AEW is a less effective bactericide on utensils, surfaces, and food products because of factors such as surface type and the presence of organic matter. Reductions of bacteria on surfaces and utensils or vegetables and fruits mainly ranged from about 2.0 to 6.0 or 1.0 to 3.5 orders of magnitude, respectively. Higher reductions were obtained for tomatoes. For chicken carcasses, pork, and fish, reductions ranged from about 0.8 to 3.0, 1.0 to 1.8, and 0.4 to 2.8 orders of magnitude, respectively. Considerable reductions were achieved with AEW on eggs. On some food commodities, treatment with BEW followed by AEW produced higher reductions than did treatment with AEW only. EW technology deserves consideration when discussing industrial sanitization of equipment and decontamination of food products. Nevertheless, decontamination treatments for food products always should be considered part of an integral food safety system. Such treatments cannot replace strict adherence to good manufacturing and hygiene practices.

In the present investigation, emulsifying potential of galactan exopolysaccharide (EPS) extracted from Weissella confusa KR780676 has been evaluated with various food grade flavours (vanilla, cardamom and pineapple). Concentration of EPS was optimized as 1% with these flavours, in addition to the effect of salinity (NaCl), monovalent ion (KCl) and temperature on emulsion activity (EA), and emulsion stability (ES) was also inspected. Filter paper wetting test exhibited water-in-oil-in-water (w/o/w) and oil-in-water (o/w) type emulsions. The extent in granule disintegration and the retrogradation process of flavour emulsions were studied with pasting properties. Electron micrography and particle size analysis revealed the morphology and the size of emulsion droplets. Thermal stability of emulsions has found 100% at various temperatures (−20 to 60 °C) for vanilla and pineapple flavour, whereas, it was varying for cardamom as per the temperature disparity. Emulsion stability of vanilla and pineapple flavour was retained as such for various concentrations of NaCl whereas decreased for cardamom in direct proportion. In case of KCl all the three flavours showed greater stability. These emulsifying properties indicate that galactan EPS can be a prospective alternative to commercial biopolymers in food and pharmaceuticals industries.

Oil and gas extraction in the western United States generates significant volumes of produced water (PW) that is typically injected into deep disposal wells. Recently, crop irrigation has emerged as an attractive PW reuse option, but the impact on plant immune response is not known. In this study, we conducted a 3-month greenhouse pot study. Spring wheat (Triticum aestivum) was irrigated 3 times a week with 150 mL (∼80–100% of soil water holding capacity) with one of four irrigation treatments: tap water control, 10% PW dilution, 50% PW dilution, and salt water (NaCl50) control containing the same amount of total dissolved solids as PW50 to determine the effect on disease resistance. The wheat leaves were inoculated with either bacterial or fungal pathogens and changes in pathogenesis-related PR-1 and PR-5 gene expression were measured from the leaf tissue. PW50 experienced the largest relative suppression of PR-1 and PR-5 gene expression compared to noninfected wheat, followed by PW10, NaCl50, and the tap water control. A combination of PW contaminants (boron, total petroleum hydrocarbons, and NaCl) are likely reducing PR-gene expression by reallocating metabolic resources to fight abiotic stresses, which then makes it more challenging for the plants to produce PR genes to fight pathogens. This study provides the first evidence that plant disease resistance is reduced due to irrigation with reused PW, which could have negative implications for food security.

Electrolyzed oxidizing water (EOW) can be considered in the agrofood industry as a new antimicrobial agent with disinfectant, detoxifying, and shelf-life improvement properties. EOW is produced by electrolysis of water, with no added chemicals, except for sodium chloride. The antifungal and detoxifying mechanisms of EOW depend mainly on: pH, oxidation-reduction potential (ORP), and available chlorine concentration (ACC). EOW offers many advantages over other conventional chemical methods, including less adverse chemical residues, safe-handling, secure, energy-saving, cost-effective, and environmentally-friendly. As a result, EOW could be used for the development of safer and more socially acceptable methods for fungi decontamination and mycotoxin detoxification. This review contains an overview of EOW effectiveness to decontaminate non-toxigenic and mycotoxigenic fungi, its safety and efficacy for mycotoxin detoxification, the proposed mechanism of action of EOW on fungal cells, and the chemical mechanism of action of EOW on mycotoxins. Finally, conclusions and future research necessities are also outlined.

In China, waste sorting practice is not strictly followed, plastics, especially food packaging, are commonly mixed in food waste. Supercritical water gasification (SCWG) of unsorted food waste was conducted in this study, using model unsorted food waste by mixture of pure food waste and plastic. Different operating parameters including reaction temperature, residence time, and feedstock concentration were investigated. Moreover, the effect of three representative food additives namely NaCl, NaHCO₃ and Na₂CO₃ were tested in this work. Finally, comparative analysis about SCWG of unsorted food waste, pure food waste, and plastic was studied. It was found that higher reaction temperature, longer residence time and lower feedstock concentration were advantageous for SCWG of unsorted food waste. Within the range of operating parameters in this study, when the feedstock concentration was 5 wt%, the highest H₂ yield (7.69 mol/kg), H₂ selectivity (82.11%), total gas yield (17.05 mol/kg), and efficiencies of SCWG (cold gas efficiency, gasification efficiency, carbon gasification efficiency, and hydrogen gasification efficiency) were obtained at 480 °C for 75 min. Also, the addition of food additives with Na⁺ promoted the SCWG of unsorted food waste. The Na₂CO₃ showed the best catalytic performance on enhancement of H₂ and syngas production. This research demonstrated the positive effect of waste sorting on the SCWG of food waste, and provided novel results and information that help to overcome the problems in the process of food waste treatment and accelerate the industrial application of SCWG technology in the future.

The dielectric properties of tylose water pastes during microwave thawing and heating were measured over 300–3000 MHz and −30 to +60 °C, and the feasibility of their use as a frozen model food instead of frozen lean tuna was evaluated. The effects of salt (NaCl) content (0.5–2.0%, wb) on the dielectric properties were investigated. Although salt is a good additive for increasing the dielectric loss factor, higher salt addition increased the thawing time and non-uniformity through decreased penetration depth. A similar response to increasing temperature between frozen lean tuna and tylose paste was observed during MW thawing and heating at 2450 MHz, due to similarities in penetration depth. This was possible by an appropriate adjustment of the dielectric properties of tylose by salt addition (0.5% NaCl). This study confirmed the potential of frozen tylose paste as a model food in evaluating performance of microwave thawing of real foods.

Salmonella can survive for extended periods of time in low-moisture environments posing a challenge for modern food production. This dangerous pathogen must be controlled throughout the production chain with a minimal risk of dissemination. Limited information is currently available describing the behavior and characteristics of this important zoonotic foodborne bacterium in low-moisture food production environments and in food. In our study, the phenotypes related to low-moisture survival of 46 Salmonella isolates were examined. Most of the isolates in the collection could form biofilms under defined laboratory conditions, with 57% being positive for curli fimbriae production and 75% of the collection positive for cellulose production, which are both linked with stronger biofilm formation. Biocides in the factory environment to manage hygiene were found to be most effective against planktonic cells but less so when the same bacteria were surface dried or present as a biofilm. Cellulose-producing isolates were better survivors when exposed to a biocide compared with cellulose-negative isolates. Examination of Salmonella growth of these 18 serotypes in NaCl, KCl, and glycerol found that glycerol was the least inhibitory of these three humectants. We identified a significant correlation between the ability to survive in glycerol and the ability to survive in KCl and biofilm formation, which may be important for food safety and the protection of public health.