Purpose. To study the effect of AKM plant growth regulator on growth, development and yield formation of sunflower (Helianthus annuus L.) hybrids in hybridization plots under the conditions of the Southern Steppe zone of Ukraine. Methods. Laboratory tests, field study, statistical evaluation. Results. The results of studies devoted to determining the optimal AKM concentration for the treatment of seeds of the maternal and paternal lines, the effect of AKM on field germination, biometric parameters of sunflower plants, seed quality (F1) and yield are presented. Three hybrids of the Ukrainian selection, such as ‘Alpha’, ‘Logos’ and ‘Persei’ were studied during 2014–2016. Optimal concentration of AKM (0.0015 g/l) was defined. The vigor of seeds processed by AKM was higher than in check variety by 0.8–12.8 р.р. (♂); 0.4–10.7 p.p. (♀), laboratory germination – by 2.3–6.1 p.p. (♂); 3.5–6.2 p.p. (♀). In 2016, the sunflower plant height for all variants exceeded this parameter to be obtained for other years of the study. This could be explained by the fact that HTC in 2016 for the BBCH 00–39 period was 1.4 times higher than in 2015. In general, hybrids as the studied factor considerably influenced sunflower yield, and the share of the hybrid (factor A) influence is 33%. This should be considered when selecting hybrids for sunflower cultivation technologies in the Steppe zone of Ukraine. Conclusions. Hydrothermal conditions of the year had the maximum impact on the formation of seed quality and yield of sunflower plants of the hybrids under study, but when using AKM growth regulator for presowing seed treatment, this negative impact was reduced by an average of 23%.

Purpose. To create and study genotypes of the secondary triticale of the hexaploid level for their effective use in further breeding and plant growing. Methods. Field study, laboratory analyses, intraspecific hybridization with subsequent individual selection. Results. New genotypes of the secon­dary triticale of the hexaploid level have been created and characterized for economic characters and agroecological traits and properties. Series of short-stem winter triticale was represented by ‘Pshenychne’, ‘Chaian’ to be adapted to the conditions of both intensive and organic farming. They are characterized by high drought resistance and winter hardiness, resistance to lodging, grain shedding, grain germination in the spike and spike fragility as well as by immunity to fungal diseases providing a high level of yield and technological quality of grain. The following new constant forms of triticale as ‘ПС_1-12’, ‘ПС_2-12’, ‘ПС_3-12’, that have an average height of the stem and belong to the Polissia-Forest-Steppe and Forest-Steppe ecotypes, demonstrated high productivity and adaptability in organic farming, particularly in case of the use of biologized elements of agrotechnology. Conclusions. For the creation a new parent material during breeding of hexaploid triticale, the method of intraspecific hybridization is desirable with the use of parent material to be contrasting for eco-geographical origin and adapted local forms, followed by individual selection of genotypes with the desired characteristics and properties in cleavable hybrid populations. New genotypes of the secondary triticale have been created and characterized for breeding, genetic and agroecological traits and properties. In breeding practice, it is advisable to use a whole new approach of agroecological and genetic certification of genotypes for the effective solution of a number of theoretical and practical tasks facing modern ecological and adaptive breeding. New parent material of the secondary winter triticale and scientific support for its cultivation is proposed for further breeding and plant growing.

Purpose. To investigate features of commercial head quality formation in varieties of cutting lettuce (Lactuca sativa var. capitata L.) for different growing methods. To study the influence of growing methods for cutting lettuce plants on the weight of commercial heads, indices of yield and quality of freshly harvested products. Methods. Field study, laboratory testing and statistical evaluation. Results. The results of studying peculiarities of head formation in such cutting lettuce varieties as ‘Godar’ (control), ‘Smuhlianka’, ‘Olzhych’ and ‘Dyvohrai’ were shown. Based on the results of phenological observations, the duration of interstage periods of growth and development of cutting lettuce plants was determined for the different growing methods. The model of cutting lettuce of capitata variety for different growing methods was presented in terms of biochemical parameters (content of dry matter, vitamin C, nitrates, amount of sugars). The influence of growing methods for cutting lettuce plants on the commercial head weight, indices of yield and quality of freshly harvested products was studied. Obtained results confirmed that in early ripening varie­ti­es the heads were smaller (150 g) and not dense, in late ripening varieties they were large and dense, weight was 150–500 g. Freshly harvested commercial products of head lettuce in case of seedling cultivation was characterized by a slight increase in dry matter content by 0.15–0.29%. The corresponding pattern was observed for the total sugar content. Its amount was slightly higher: 1.3–1.9% in case of direct sowing and 1.6–1.9% – for seedlings cultivation. The content of ascorbic acid (vitamin C, mg/100 g) was the highest in the ‘Dyvohrai’ variety despite of the method of growing. The largest quantity of nitrates in lettuce heads was in the inner stem (480 mg/kg), while in the middle of the head it was reduced to 110 mg/kg. Conclusions. Freshly harvested heads of cutting lettuce were analyzed for the content of such basic biochemical indices as dry matter, vitamin C, protein, nitrates, amount of sugars. Biochemical characteristics of freshly harvested products of heading lettuce in case of direct sowing and non-seedling methods of growing were within the error being almost identical with minor deviations. According to the study results, a typical model of capitate lettuce variety was designed which will have practical application in qualification examination of plant varieties.

Purpose. To investigate the variability of plant biometrics of cutting lettuce (Lactuca sativa L.) varieties depending on the concentration of microfertilizer Avatar-1. Methods. Field study, biometric technique, comparative approach, statistical evaluation, generalization. Results. Dependence of the plant height, the diameter of the leaf rosette, the number of leaves per plant, the leaf area of plants on the concentration of microfertilizer Avatar-1 was defined. Investigations of cutting lettuce ‘Afitsyon’ and ‘Concord’ varieties by Dutch breeding were conducted in 2016–2017 in the collection sites of the department of vegetable growing in the scientific-experimental field  “Fruit and vegetable garden” of the National University of Life and Environmental Sciences of Ukraine. In order to determine dependence of plant biometrics of cutting lettuce varieties on the concentration of complex microfertilizer Avatar-1, the following scheme was used for the both varieties: variant 1 – water (control); variant 2 – 0,10% solution; variant 3 – 0,25% solution; variant 4 – 0,50% solution. Plants were treated with microfertilizer three times during the vegetative period. Alterations of plant biometrics of cutting lettuce ‘Afitsyon’ and ‘Concord’ varieties  depending on the concentration of complex microfertilizer Avatar-1 was studied. Conclusions. It was found that in case of three-time plant treatment with complex microfertilizer Avatar-1 at the time of harvesting, the best plant biometrics was registered in variant 3 (concentration 0,25%) for the both ‘Afitsyon’ and ‘Concord’ varie­ties of cutting lettuce. The height of plants of the cutting lettuce in ‘Afitsyon’ variety exceeded this figure in ‘Concord variety by 1,1–1,4 cm. The concentration of microfertilizer had no significant effect on the diameter of the leaf rosette of ‘Concord’ variety (25,1–25,9 см). The diame­ter of the leaf rosette of ‘Afitsyon’ variety was 26,0–28,7 cm. In cutting lettuce, the largest leaf area per plant was registered in ‘Afi­tsyon’ variety (3516.5 cm2/plant ) in case of plants  treatment with 0,25% solution of complex microfertilizer Avatar-1 that exceeded this figure in ‘Concord’ varie­ty by 660 cm2/plant. The best plant biometrics of cutting lettuce of the studied varieties and optimal concentration of complex microfertilizer Avatar-1 (0.25% solution) was defined that is important for improving agricultural cultivation techniques.

Purpose. To develop a tobacco variety model with optimal inflorescence traits such as size and shape that will allow to increase seed productivity of the crop. Methods. Statistical and mathematical (correlative, regressive) ones. Results. Basic collection consisting of 282 variety samples registered in the National Genetics Center was evaluated, optimal parameters of inflorescence were defined that can provide a high seed yield. During statistical analysis, correlation matrix was developed with the purpose to highlight traits that correlate with inflorescence productivity. According to the results of correlation analysis, a strong relationship between the width and height of inflorescence (r = 0,773±0,038) was established. Somewhat weaker correlation was observed when modeling regressive relation between inflorescence height and width, where regression showed the medium relationship. Regression equation of these traits is as follows: y = 0,5585x + 8,4649. Inflorescence density (r = 0,646), height (r = 0,556) and width (r = 0,527) also had quite a high positive effect on seed productivity. The results of regression analysis pointed to the fact that there were a linear relationship between inflorescence size and seed productivity. Conclusions. Among 282 samples of basic tobacco collection, 29 varieties with high seed productivity was defined which can be used in the breeding process, and ‘Sobolchskyi 15/21’, ‘Ergo 23’, ‘C-11’, ‘Sygarnyi 99’ varieties were selected for large-scale implementation into the production of raw material of cigar type.

Purpose. To obtain Miscanthus sacchariflorus (Maxim.) Hack and Miscanthus sinensis Andersson in vitro culture by indirect morphogenesis. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Composition of nutrient medium was developed intended for induction of callusogenesis from Miscanthus seeds with a poor germination and viability of seedlings – Murashige and Skoog (MS) medium was modified for the amount of macroelements (half-dose) that was supplemented with amino acids (300 mg/l of glutamic acid, 50 mg/l of aspartic acid, 5 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline) and plant growth regulators [2,5 mg/l of 2.4D (2.4-Dichlorophenoxyacetic acid), 0,6 mg/l of BAP (6-Benzyl-aminopurine) and 0,3 mg/l of ABA (Abscisic acid)]. Composition of nutrient medium was developed for regeneration of microplants from callus – agar MS medium was modified for the amount of macroelements (half-dose) supplemented with vitamins: 10 mg/l of thiaminum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid (by White), 1,0 mg/l of ascorbic acid, 250 mg/l of glutamic acid, 2,0 mg/l of BAP, 0,3 mg/l of NAA (Naphthaleneacetic acid). On this medium, 100% regeneration of M. sacchariflorus (Maxim.) Hack and 50% regeneration of M. sinensis Andersson was obtained. Due to media modification aimed at initiating callusogenesis and microplants regeneration, reproduction factor of M. sinensis was increased 20 times at the average, M. sacchariflorus – 35–40 times. Conclusions. Plants of M. sacchariflorus (Maxim.) Hack and M. sinensis Andersson were obtained in vitro culture by initiation of callusogenes and microplants regeneration from the Miscanthus seeds with poor germination and viability on nutrient media of certain composition.

Purpose. To assess introduced samples of drought-resistant species of perennial grasses, select a promising parent material and create on its base high-yielding varie­ ies with economic characters. Methods. Field experiment, laboratory testing. Results. The results of studies on introduction and breeding were given aimed to improve drought tolerance of non-traditional perennial grasses under the conditions of the Right-Bank Forest-Steppe zone of Ukraine. Based on the selected parent material, varieties were created by the use of hybridization and ecotype breeding methods and then entered into the State Register of plant varieties suitable for dissemination in Ukraine, among them: intermediate wheatgrass (Elytrigia intermedia (Host) Nevski) – ‘Hors’, crested wheatgrass (Agropyron cristatum (L.) Gaertn.) – ‘Petrivskyi’; meadow brome (Bromus riparia Rehm.) – ‘Boian’; slender wheatgrass (Roegneria trachycaulon (Link) Nevski) – ‘Co­umb’. As compared with conventional, relatively drought-tolerant species of smooth brome (Bromopsis inermis (Leyss.) Holub) – ‘Mars’, increment of dry matter content of these species in the extreme drought conditions of 2011 was increased by 1,52–3,73 t/ha. Under more sufficient moistening conditions of 2012, slender wheatgrass ‘Columb’ was at the level of the сheck variety in terms of this indicator. Other varieties exceeded it by 1.44–3.22 t/ha. The data was given including seed productivity and sowing quality indicators, after-ripening duration and economic fitness of seeds. Conclusions. The use of the recommended varieties of drought-resistant species of perennial grasses as part of grass mixtures will increase significantly the productivity of grasslands and pastures in the current context of climate change.

Purpose. To investigate the varietal characteristics of the hemp plants for improving the quality indices of the soil they grow in, determine the amount of inorganic elements in the soil, level of their accumulation in plant stalkі and seeds. Methods. Field and spectrometric methods were basic. The results were processed using conventional methods in agriculture, crop growing and statistics. Variants of the experiment were as follows: varieties ‘Hliana’, ‘Hlesiia’: 1) soils; 2) stalks; 3) seeds. Schemes of experiments included: a) technical maturity of plants, row spacing 45 cm; b) tech­nical maturity of plants, row spacing 15 cm; c) biological maturity of plants, row spacing 45 cm; d) biological maturity of plants, row spacing 15 cm. Results. The amount of the accumulation of alkaline earth metals and their compounds by seeds and stalks of hemp plants depending on their content in vegetation soils was determined. It was found that stalks of the ‘Hlesiia’ plant accumulated strontium (Sr) and its compounds far less than that of ‘Hliana’, whereas in the seeds of the ‘Hlesiia’ variety the content of this chemical element was higher comparing with the previous variety by 70 and 78%, respectively. The difference in the accumulation of barium (Ba) compounds in seeds of hemp plants was not significant, while the tissues of the plant stalks of the ‘Hlia­na’ variety accumulated its compounds significantly more as compared to the ‘Hlesiia’ variety. The degree of influence of the variety, feeding area and the maturity stage on the processes of magnesium compounds (Mg) accumulation by plants was not revealed. Plants of the ‘Hlesiia’ variety accumulated far less calcium (Ca) and its compounds in the stalk tissues as compared to the plants of the ‘Hliana’ variety: in variants of the technical maturity stage of plants with row spacing 45 cm (a) and d – plants of narrow-row sowing (15 cm) in the biological maturity stage 30,94 and 15,95 mg/kg more in the presence in soil and in variants of the technical maturity stage of plants of narrow-row sowing (15 cm) and in the biological maturity stage with broad-sowing (45 cm) 34.54 and 24.19 mg/kg less in the presence in soil. Conclusions. The indices of accumulation of alkaline earth metals by hemp plants were significantly affected by the concentration of compounds of a certain chemical element in the arable layer, the level of energy (light) obtained by plants during vegetation, the varietal features of hemp, the stages of organogenesis of hemp plants and the specificity of their aboveground parts – stalks to accumulate these chemical elements as well as cumulate them by seeds. The varietal dependence as for accumulation of heavy metals by hemp plants tissues and seeds was established. In order to obtain environmentally friendly products, it is necessary to take into account the varietal features of plants concerning the ability to absorb and accumulate the relevant chemical elements and their compounds in the process of hemp culti­vation.

Purpose. To develop a method of propagation, stimulation of rhizomes growth in vitro culture for the genus Miscanthus representatives and their adaptation in the open field without the use of greenhouse complexes for acclimatization and completion of growing. Methods. Biotechnological procedures, mathematical and statistical analyses. Results. Prescription of nutrient medium was developed for explants inoculation, sprouts propagation, rhizomes growth stimulation in vitro. Such sterile explants as seeds, buds to be removed from rhizomes, parts of stems with bud were placed on modified media with mineral portion by Murashige and Skoog (MS) that contained 0,5–1 dose of macroelements and one dose of microelements, vitamins (10 mg/l of thia­minum, 1,0 mg/l of pyridoxine, 1,0 mg/l of nicotinic acid and 1,0 mg/l of ascorbic acid) supplemented with amino acids (250 mg/l of glutamic acid, 3 mg/l of tyrosine, 3 mg/l of arginine, 2 mg/l of hydroxyproline), plant growth regulators [0,5–1,0 mg/l of GA (gibberelline acid), 0,2 mg/l of 6-BAP (6-Benzylaminopurine, 0,1 mg/l of NAA (α-naphtylacetic acid)] in different variations. After seed germination, buds emerging and sprouts formation 1–2 cm in height, for propagation purpose they were passivated on the medium of other composition that differed from previous one by the content and ratio of growth regulators, especially by a high concentration of cytokinins [6-BAP (0,4–0,5 mg/l), kinetin (0,5 mg/l), adenine (0,5 mg/k)] in different variations in presence of GA (0,2 mg/l). In order to stimulate rhizomes growth, microclones were transferred on media with other composition and ratio growth regulators (6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) or 6-BAP (0,2–0,3 mg/l) + GA (0,5–1,0 mg/l) + NAA (0,1 mg/l), in other words, with a high content of gibberellins. After the formation of rhizomes 10–15 cm in length, miscanthus plants were planted out in the open ground. Stimulation of rhizomes initiation and elongation on appropriate nutrient media before Miscanthus giganteus, M. sacchariflorus and M. sinensis planting in vivo resulted in 100% adaptation and 100% survival of plants in the winter period without the use of greenhouse complexes. Conclusions. The method of miscanthus propagation in vit­ro and adaptation in the open ground was developed that included stimulation of rhizomes growth and favoured the increase of their length on media supplemented with gibbe­relline that guaranteed 100% preservation of microplants to be propagated from in vitro culture during adaptation in the open ground and acclimatization in winter.

Purpose. To determine the possibility of the domestic viticulture transition to the ecological (adaptive) management system, based on the use of highly adaptive varieties. Methods. Procedures are conventional in viticulture. All stages of agrobiological research were carried out according to the M. A. Lazarevskiy technique. The resistance of genetic resources to fungal diseases was assessed using the 9-point scale on the natural infectious background with maximum damage. Organoleptic evaluation of wine and fresh grapes was performed using 8-point and a 10-point scales respectively. Results. The main agrobiological traits (resistance to diseases, productivity and yield quality) of 22 perspective grape varieties and forms were studied. The level of resistance to fungal diseases was determined as one of the main criteria of the variety suitability for ecological (adaptive) viticulture. During five years, the average resistance level of this group of table and wine varieties was not lower than the relative one (6.5–7 points), and in ‘Zagrei’ variety – up to 7,5 points. The level of quality characteristics of products of new grape varieties and forms was determined (wine evaluation, marketability and assessment of fresh table grapes). Samples with a combination of high wine and grape quality characteristics and high productivity were selected. To replenish the gene pool of grapes by adaptive varieties, such perspective hybrid combinations as ‘Opalovyi’ ´ ‘Burmunk, ‘Avgustin’ ´ ‘Oryhinal and ‘Ohoniok tairovskyi’ ´ ‘Kardyshakh’ were studied. The level of group resistance to fungal diseases was identified and the perspective genotypes were preliminarily selected. Conclusions. The level of display of a number of economic characters in the group of perspective table and wine grape varieties and forms was determined. Highly adaptive and highly productive varieties and forms suitable for the use in the adaptive viticulture were defined. Prospective hybrid combinations were considered, from which highly adaptive varieties will be selected as suitable for the ecological system of viticulture.