Objective—To evaluate changes in the cortical bone of the proximal phalanx of the fore-limbs of Thoroughbreds in response to training. Animals—Twenty-seven 2-year-old Thoroughbreds (20 females, 2 males, and 5 geldings). Procedures—Horses were principally in training for races in a straight line and in a clockwise direction. Lateromedial and dorsopalmar radiographic views of each metacarpophalangeal joint were obtained before the horses started training and 1 year after starting exercise and racing. Width of the dorsal, palmar, lateral, and medial cortex and the width and thickness of the medulla were measured. Ratios (rather than absolute values) were used to remove the effect of differences in bone size among horses. Results—10 horses were lost from the study. Radiographs were obtained for 17 horses 1 year after starting training (9 horses raced in a clockwise direction, and 8 raced in clockwise and counterclockwise directions). There was no difference between the cortical bone in the right and left forelimbs at the start of the study. After training for 1 year, the palmar cortex in the right forelimb was significantly thicker than that in the left forelimb. Conclusions and Clinical Relevance—The strain patterns, biomechanics of rapid exercise, and type of training most probably determined differences in the adaptive responses of the proximal phalanx. The data reported here can be used in the evaluation of weight-bearing distribution along the proximal phalanx and evaluation of the relationship between exercise and bone remodelling of the proximal phalanx.

Escherichia coli O157:H7 remains a threat to humans via cattle-derived fecal contamination of food and water. Preharvest intervention strategies represent a means of reducing the pathogen burden before harvest. In this study, the efficacy of a commercially produced type III secreted protein (TTSP) vaccine was evaluated with the use of a commingled experimental calf infection model (30 placebo-treated animals and 30 vaccinates). The calves were vaccinated on days 0, 21, and 42 and infected with 109 colony-forming units (CFU) of E. coli O157 by oral–gastric intubation on day 56. Fecal shedding was monitored daily for 14 d. Serologic assessment revealed a robust immune response to vaccination; the serum titers of antibodies against EspA, Tir, and total TTSPs were significantly higher in the vaccinates than in the placebo-treated animals on days 21, 42, 56, and 70. Significantly less (P = 0.011) of the challenge organism was shed by the vaccinates than by the placebo-treated animals on days 3 to 10. Peak shedding occurred in both groups on days 3 to 6; during this period the vaccinates showed a mean log reduction of 1.4 (P = 0.002) and a mitigated fraction of 51%. The number of animals shedding was significantly lower among the vaccinates compared with the placebo group on days 3 to 6 (P ≤ 0.05), with a mean prevented fraction of 21%. No differences in the duration of shedding were observed. Owing to the low challenge shedding in both groups on days 11 to 14 (mean CFU/g < 10; median = 0), no significant differences were observed. These data indicate that TTSP vaccination had protective effects through significant reductions in the number of animals shedding and the number of challenge organisms shed per animal and provides evidence that TTSP vaccination is an effective preharvest intervention strategy against E. coli O157.

To declare the wound healing activity of cumin seeds on excision wound models in female rabbits. The cumin seeds obtained from local market from the plant know as Cuminum cyminum were subjected to solvent acetone, the oil ointment were prepared and applied topically three times a day to excision wound for 14th days post operative and compared with control. The reduction of wound was studied as a percent macroscopically and the revitalization and formation new tissue was studied histopathologically on excision wound. Its concluded the treated wound showed a faster rate of wound reduction compared with control, this was further supported with his to pathological studies.

This study was carried out to see the pattern of pneumonic disease in Basrah general hospital in the two groups of patients, inpatients out patients and to see the extent of tuberculosis presented as pneumonia, not as atypical case of clinical and X-ray findings in the apices of lungs. This is prospective study for patients with typical history, signs investigation chest x-ray of pneumonia, lobar and bronchopneumonia from the period of (April 2006) to (October 2008) were included in this study, they are attending the out patient department or are admitted in the wards of the Basrah general hospital. From a total of 374 cases of pneumonia, 26 cases of TB pneumonia diagnosed. There findings did not suggest TB to start. There age range from one to 72 years, the most common age group affected was 20-40 year for both sexes, while at age group 50-70 males affected more, bronchopneumonia was comment type of pneumonia in this group recorded in 13 patients, or bronchitis in 6 patients. ESR was less than 50 mm/hr in 12 patients so it is unreliable in 50% of cases. This study show that pulmonary TB is increasing (5.36%), and it could present in pneumonia like picture not involving the typical sites (apices) even in those who are not diabetic or immune compromised.

In the present study, Low density polyethylene with various contents of lignin films were investigated for their resistance to bacterial adhesion. The disc diffusion method was employed for this purpose. The results of bacterial growth on low-density polyethylene (LDPE )–lignin composite were reported. lignin was added by 1%,2%,3%,4%,5%,10% and 15% of polyethylene weight. We compared initial adhesion and surface growth of staphylococcus aureus , streptococcus pyogens, pseudomonus aerugenosa, eschrishia coli and klebciala spp. A 5 mm of test polymer composites were inoculated in the 9 cm Petri dish for 1-2 days and zone of inhibition and bacterial growing were observed and recorded. After 24 hours the bacterial growing of S. aureus , S. pyogens and E. coli were distributed all over the control agar with no growth on the polymeric composites films while Both P. aeruginosa and K. spp. have a dense growing. After 48 hours a slight adhesion of S. aureus on polyethylene-lignin discs was found with radius of growing was 3 mm .For P. aeruginosa we have more dense growing . It was found that the lignin contents have no clear inhibition against tested bacteria where this might be due to a limitation of the agar disc diffusion method. The vanishing of inhibition zone was combined with the absence of adherent bacteria on the polyethylene films. More concentration of natural lignin is required to get inhibition effect.

The present work was performed to study the effect of chromium piclonate and ⁄ or ascorbic acid supplementation on the performance of growing kids during hot summer season (33.6oC and 74.2% RH). A total number of twenty four weaned commercial kids were randomly distributed into four treatment groups of 6 kids per each Kids in all treatments were equal in number and had nearly similar initial body weight. The first group was fed the basal diet and served as control (0.0 supplementation), while the other three groups were fed diets supplemented with 75 mg/kg diet chromium piclonate, 800 mg/ kg diet ascorbic acid and 75 mg / kg diet chromium piclonate + 800 mg ascorbic acid, respectively. The results obtained for growing Kids showed that the final live body weight and daily body gain were increased significantly (P < 0.05 or 0.01) during 210 and 270 days for Kids fed diets supplemented with chromium piclonate, ascorbic acid and chromium piclonate + ascorbic acid. However, the supplementation of chromium piclonate + ascorbic acid seemed to be the best significant performance. The results obtained for growing Kids showed that the daily feed intake, feed conversion, water ⁄ feed intake ratio, water ⁄ daily gain ratio were increased significantly (P < 0.05 or 0.01) during the experimental periods for Kids fed diets supplemented with chromium piclonate, ascorbic acid and chromium piclonate + ascorbic acid. The Results showed that water intake, rectum temperature and respiration rate were not significantly affected by previous treatments. The best margin was obtained in group fed on the diet supplemented with chromium piclonate + ascorbic acid. All carcass traits were increased insignificantly due to dietary chromium piclonate and ⁄or ascorbic acid supplementation. Serum total proteins were increased significantly (P < 0.05), in group three only while the cholesterol level and triglycerides decreased significantly (P<0.05) in Kids treated with chromium piclonate as compared with the control group under summer heat stress conditions. Serum albumin, globulin, urea-, creatinine, AST, WBCs, RBCs MCV, MCH and Hb content were insignificantly affected by chromium piclonate and ⁄or ascorbic acid supplementation to the kids’ diets. Finally, it could be concluded that supplementation of 75 mg chromium piclonate + 800 mg ascorbic acid / kg diet to the kid diets is necessary to improve the productivity, under the summer conditions

Objective—To compare the bone temperature and final hole dimensions associated with sequential overdrilling (SO) and single 6.2-mm drill bit (S6.2DB) methods used to create transcortical holes in the third metacarpal bones (MCIIIs) of horse cadavers. Sample—60 MCIIIs from 30 horse cadavers. Procedures—In phase 1, hole diameter, tap insertion torque, peak bone temperature, and postdrilling bit temperature for 6.2-mm-diameter holes drilled in the lateral or medial cortical region of 12 MCIIIs via each of three 2-bit SO methods with a single pilot hole (diameter, 3.2, 4.5, or 5.5 mm) and the S6.2DB method were compared. In phase 2, 6.2-mm-diameter transcortical holes were drilled via a 2-bit SO method (selected from phase 1), a 4-bit SO method, or a S6.2DB method at 1 of 3 locations in 48 MCIIIs; peak bone temperature during drilling, drill bit temperature immediately following drilling, and total drilling time were recorded for comparison. Results—Hole diameter or tap insertion torque did not differ among phase 1 groups. Mean ± SD maximum bone temperature increases at the cis and trans cortices were significantly less for the 4-bit SO method (3.64 ± 2.01°C and 8.58 ± 3.82°C, respectively), compared with the S6.2DB method (12.00 ± 7.07°C and 13.19 ± 7.41°C, respectively). Mean drilling time was significantly longer (142.9 ± 37.8 seconds) for the 4-bit SO method, compared with the S6.2DB method (49.7 ± 24.3 seconds). Conclusions and Clinical Relevance—Compared with a S6.2DB method, use of a 4-bit SO method to drill transcortical holes in cadaveric equine MCIIIs resulted in smaller bone temperature increases without affecting hole accuracy.

Little is known about the sources and kinetics of enterotoxigenic Escherichia coli colonization in pigs during the pre-and post-weaning period. In this study, farrowing pens, sows, and piglets were tested for the presence of E. coli O149 by real-time polymerase chain reaction (PCR) after bacterial culture pre-enrichment on 2 farms, one with a history of post-weaning diarrhea (problem farm — PF) and the other without such a history (non-problem farm — NPF). Unlike those on the PF, the sows from the NPF did not carry E. coli O149 before parturition, although they were colonized to frequencies similar to animals on the PF soon afterwards. Most piglets from the NPF were colonized within a week after birth, whereas only a small proportion of those on the PF were colonized during that period. No difference was observed in the frequency of piglet colonization at the 2 farms either at weaning or during the following week. Post-weaning diarrhea (PWD), which is caused by enterotoxigenic E. coli (ETEC), is a multifactorial disease. The presence of ETEC alone is not always sufficient for the disease to develop. Many other factors are considered to be associated with the occurrence of PWD, including feed type (1,2), feeding regimen (1,3,4), the presence of other infectious agents (3,5), weaning age, and weight (6). Weaning, which is considered to be a major physiological and psychological stress factor, is critical for the disease to occur (7). Although piglets are already colonized with ETEC before weaning (4,8), on many farms, clinical disease occurs only after weaning (1). Both sows (9,10) and the environment (6) could be possible sources of infection for piglets, but results from previous studies have not resolved this issue because of the low sensitivity of ETEC detection methods. This study provides preliminary data based on a sensitive detection method for E. coli O149 in pigs and their environment. The results demonstrate the potential of real-time PCR for future studies on this topic.

This study investigated the occurrence and antimicrobial resistance profiles of Escherichia coli and Salmonella sp. isolated from swine samples submitted to the Minnesota Veterinary Diagnostic Laboratory (MVDL) in Saint Paul, Minnesota from 1995 to 2004. During this time period, a total of 5072 E. coli and 2793 Salmonella sp. was isolated. Most of these isolates were found to be resistant to the tetracycline and beta-lactam group of antibiotics. Resistance to spectinomycin was also frequently observed. An increasing trend in ampicillin resistance and a decreasing trend in apramycin resistance were seen in both pathogens, although ampicillin resistance was relatively higher in E. coli than in Salmonella. Aminoglycoside (amikacin) and quinolone (enrofloxacin) were the only antimicrobials to which minimum or no resistance was observed. The resistance of pig pathogens to several antibiotics indicates the need to routinely monitor the use of these antimicrobials and their associated resistance in pig populations.

Objective—To evaluate the effects of pilot hole diameter and tapping on insertion torque and axial pullout strength of 4.0-mm cancellous bone screws in a synthetic canine cancellous bone substitute. Sample—75 synthetic cancellous bone blocks (15 blocks/group). Procedures—For groups 1 through 5, screw size-pilot hole diameter combinations were 3.5–2.5 mm (cortical screws), 4.0–2.5 mm, 4.0–2.5 mm, 4.0–2.0 mm, and 4.0–2.0 mm, respectively. Holes were tapped in groups 1, 2, and 4 only (tap diameter, 3.5, 4.0, and 4.0 mm, respectively). One 70-mm-long screw was inserted into each block; in a servohydraulic materials testing machine, the screw was extracted (rate, 5 mm/min) until failure. Mean group values of maximum insertion torque, axial pullout strength, yield strength, and stiffness were determined. Results—Mean maximum insertion torque differed significantly among the 5 groups; the group 5 value was greatest, followed by group 3, 4, 2, and 1 values. Group 3, 4, and 5 axial pullout strengths were similar and significantly greater than the group 2 value; all values were significantly greater than that for group 1. Group 5 and 4 yield strengths were similar and significantly greater than the group 3, 2, and 1 values. Stiffness in group 3 was similar to group 4 and 2 values but significantly greater than the group 5 value; all values were significantly greater than that for group 1. Conclusions and Clinical Relevance—These synthetic cancellous bone model findings suggested that tapping a 2.0-mm-diameter pilot hole when placing a 4.0-mm screw is the optimal insertion technique.