Уточнить поиск
Результаты 1-10 из 114
A spatio-temporal noise map completion method based on crowd-sensing
2021
Huang, Min | Chen, Lina | Zhang, Yilin
The construction of noise maps is of great significance for the development of urban sustainability and the protection of residents’ physical and mental health. The traditional noise map construction method is difficult to be widely used because of its low update frequency and high drawing cost. Based on the crowd-sensing technology and Latent Factor Model (LFM), this paper proposes a new noise map completion method called Spatial-Temporally Related LFM (STR-LFM) for solving the problem of data sparseness. First, the geographic information features including Point of Interest (POI), road network and building outline are fully excavated, and then combine the correlation of the samples in the time dimension to construct the similarity matrixes. After that, use the k-nearest neighbor algorithm to find out the similar samples of missing positions, and finally regard their weighted fusion as the predicted values. Experimental results show that the recovery error is lower than other commonly used methods, and the proposed method has better stability when faced with data sparseness problems at different levels.
Показать больше [+] Меньше [-]Re-estimating methane emissions from Chinese paddy fields based on a regional empirical model and high-spatial-resolution data
2020
Sun, Jianfei | Wang, Minghui | Xu, Xiangrui | Cheng, Kun | Yue, Qian | Pan, Genxing
Quantifying methane (CH₄) emissions from paddy fields is essential for evaluating the environmental risks of the paddy rice production system, and improving the accuracy of CH₄ modeling is a key issue that needs to be addressed. Based on a database containing 835 field measurements, both single national and region-specific models were established to estimate CH₄ emissions from paddy fields considering different environmental factors and management patterns using 70% of the measurements. The remaining 30% of the measurements were then used for model evaluation. The performance of the region-specific model was better than that of the single national model. The region-specific model could simulate CH₄ emissions in an unbiased manner with R² values of 0.15–0.70 and efficiency values of 11–60%. The paddy rice type, water regime, organic amendment, latitude, and soil characteristics (pH and bulk density) were identified as the main drivers in the models. By inputting the high-resolution spatial data of these drivers into the established model, the CH₄ emissions from China’s paddy fields were estimated to be 4.75 Tg in 2015, with a 95% confidence interval of 4.19–5.61 Tg. The results indicated that establishing and driving a region-specific model with high-resolution data can improve the estimation accuracy of CH₄ emissions from paddy fields.
Показать больше [+] Меньше [-]Validation of mobile in situ measurements of dairy husbandry emissions by fusion of airborne/surface remote sensing with seasonal context from the Chino Dairy Complex
2018
Leifer, Ira | Melton, Christopher | Tratt, David M. | Buckland, Kerry N. | Chang, Clement S. | Frash, Jason | Hall, Jeffrey L. | Kuze, Akihiko | Leen, Brian | Clarisse, Lieven | Lundquist, Tryg | Van Damme, Martin | Vigil, Sam | Whitburn, Simon | Yurganov, Leonid
Mobile in situ concentration and meteorology data were collected for the Chino Dairy Complex in the Los Angeles Basin by AMOG (AutoMObile trace Gas) Surveyor on 25 June 2015 to characterize husbandry emissions in the near and far field in convoy mode with MISTIR (Mobile Infrared Sensor for Tactical Incident Response), a mobile upwards-looking, column remote sensing spectrometer. MISTIR reference flux validated AMOG plume inversions at different information levels including multiple gases, GoogleEarth imagery, and airborne trace gas remote sensing data. Long-term (9-yr.) Infrared Atmospheric Sounding Interferometer satellite data provided spatial and trace gas temporal context.For the Chino dairies, MISTIR-AMOG ammonia (NH₃) agreement was within 5% (15.7 versus 14.9 Gg yr⁻¹, respectively) using all information. Methane (CH₄) emissions were 30 Gg yr⁻¹ for a 45,200 herd size, indicating that Chino emission factors are greater than previously reported.Single dairy inversions were much less successful. AMOG-MISTIR agreement was 57% due to wind heterogeneity from downwind structures in these near-field measurements and emissions unsteadiness. AMOG CH₄, NH₃, and CO₂ emissions were 91, 209, and 8200 Mg yr⁻¹, implying 2480, 1870, and 1720 head using published emission factors. Plumes fingerprinting identified likely sources including manure storage, cowsheds, and a structure with likely natural gas combustion.NH₃ downwind of Chino showed a seasonal variation of a factor of ten, three times larger than literature suggests. Chino husbandry practices and trends in herd size and production were reviewed and unlikely to add seasonality. Higher emission seasonality was proposed as legacy soil emissions, the results of a century of husbandry, supported by airborne remote sensing data showing widespread emissions from neighborhoods that were dairies 15 years prior, and AMOG and MISTIR observations. Seasonal variations provide insights into the implications of global climate change and must be considered when comparing surveys from different seasons.
Показать больше [+] Меньше [-]Space-time PM2.5 mapping in the severe haze region of Jing-Jin-Ji (China) using a synthetic approach
2018
Long- and short-term exposure to PM2.5 is of great concern in China due to its adverse population health effects. Characteristic of the severity of the situation in China is that in the Jing-Jin-Ji region considered in this work a total of 2725 excess deaths have been attributed to short-term PM2.5 exposure during the period January 10–31, 2013. Technically, the processing of large space-time PM2.5 datasets and the mapping of the space-time distribution of PM2.5 concentrations often constitute high-cost projects. To address this situation, we propose a synthetic modeling framework based on the integration of (a) the Bayesian maximum entropy method that assimilates auxiliary information from land-use regression and artificial neural network (ANN) model outputs based on PM2.5 monitoring, satellite remote sensing data, land use and geographical records, with (b) a space-time projection technique that transforms the PM2.5 concentration values from the original spatiotemporal domain onto a spatial domain that moves along the direction of the PM2.5 velocity spread. An interesting methodological feature of the synthetic approach is that its components (methods or models) are complementary, i.e., one component can compensate for the occasional limitations of another component. Insight is gained in terms of a PM2.5 case study covering the severe haze Jing-Jin-Ji region during October 1–31, 2015. The proposed synthetic approach explicitly accounted for physical space-time dependencies of the PM2.5 distribution. Moreover, the assimilation of auxiliary information and the dimensionality reduction achieved by the synthetic approach produced rather impressive results: It generated PM2.5 concentration maps with low estimation uncertainty (even at counties and villages far away from the monitoring stations, whereas during the haze periods the uncertainty reduction was over 50% compared to standard PM2.5 mapping techniques); and it also proved to be computationally very efficient (the reduction in computational time was over 20% compared to standard mapping techniques).
Показать больше [+] Меньше [-]Association between nighttime artificial light pollution and sea turtle nest density along Florida coast: A geospatial study using VIIRS remote sensing data
2018
Hu, Zhiyong | Hu, Hongda | Huang, Yuxia
Artificial lighting at night has becoming a new type of pollution posing an important anthropogenic environmental pressure on organisms. The objective of this research was to examine the potential association between nighttime artificial light pollution and nest densities of the three main sea turtle species along Florida beaches, including green turtles, loggerheads, and leatherbacks. Sea turtle survey data was obtained from the “Florida Statewide Nesting Beach Survey program”. We used the new generation of satellite sensor “Visible Infrared Imaging Radiometer Suite (VIIRS)” (version 1 D/N Band) nighttime annual average radiance composite image data. We defined light pollution as artificial light brightness greater than 10% of the natural sky brightness above 45° of elevation (>1.14 × 10⁻¹¹ Wm⁻²sr⁻¹). We fitted a generalized linear model (GLM), a GLM with eigenvectors spatial filtering (GLM-ESF), and a generalized estimating equations (GEE) approach for each species to examine the potential correlation of nest density with light pollution. Our models are robust and reliable in terms of the ability to deal with data distribution and spatial autocorrelation (SA) issues violating model assumptions. All three models found that nest density is significantly negatively correlated with light pollution for each sea turtle species: the higher light pollution, the lower nest density. The two spatially extended models (GLM-ESF and GEE) show that light pollution influences nest density in a descending order from green turtles, to loggerheads, and then to leatherbacks. The research findings have an implication for sea turtle conservation policy and ordinance making. Near-coastal lights-out ordinances and other approaches to shield lights can protect sea turtles and their nests. The VIIRS DNB light data, having significant improvements over comparable data by its predecessor, the DMSP-OLS, shows promise for continued and improved research about ecological effects of artificial light pollution.
Показать больше [+] Меньше [-]Analysis of the relationships between environmental noise and urban morphology
2018
Han, Xiaopeng | Huang, Xin | Liang, Hong | Ma, Song | Gong, Jianya
Understanding the effects of urban morphology on urban environmental noise (UEN) at a regional scale is crucial for creating a pleasant urban acoustic environment. This study seeks to investigate how the urban morphology influences the UEN in the Shenzhen metropolitan region of China, by employing remote sensing and geographic information data. The UEN in this study consists of not only regional environmental noise (RN), but also traffic noise (TN). The experimental results reveal the following findings: 1) RN is positively correlated with the nighttime light intensity (NTL) and land surface temperature (LST) (p < 0.05). More interestingly, landscape composition and configuration can also significantly affect RN. For instance, urban vegetation can mitigate the RN (r = −0.411, p < 0.01). There is a reduced RN effect when fewer buildings exist in an urban landscape, in terms of the positive relationship between building density and RN (r = 0.188, p < 0.01). Given the same percentage of building area, buildings are more effective at reducing noise when they are distributed across the urban scenes, rather than being spatially concentrated (r = −0.205, p < 0.01). 2) TN positively relates to large (r = 0.520, p < 0.01) and small–medium (r = 0.508, p < 0.01) vehicle flow. In addition, vegetation along or near roads can alleviate the TN effect (r = −0.342, p < 0.01). TN can also become more severe in urban landscapes where there is higher road density (r = 0.307, p < 0.01). 3) Concerning the urban functional zones, traffic land is the greatest contributor to urban RN, followed by mixed residential and commercial land. The findings revealed by this research will indicate how to mitigate UEN.
Показать больше [+] Меньше [-]Integrated GIS and multivariate statistical analysis for regional scale assessment of heavy metal soil contamination: A critical review
2017
Hou, Deyi | O'Connor, David | Nathanail, P. (Paul) | Tian, Li | Ma, Yan
Heavy metal soil contamination is associated with potential toxicity to humans or ecotoxicity. Scholars have increasingly used a combination of geographical information science (GIS) with geostatistical and multivariate statistical analysis techniques to examine the spatial distribution of heavy metals in soils at a regional scale. A review of such studies showed that most soil sampling programs were based on grid patterns and composite sampling methodologies. Many programs intended to characterize various soil types and land use types. The most often used sampling depth intervals were 0–0.10 m, or 0–0.20 m, below surface; and the sampling densities used ranged from 0.0004 to 6.1 samples per km², with a median of 0.4 samples per km². The most widely used spatial interpolators were inverse distance weighted interpolation and ordinary kriging; and the most often used multivariate statistical analysis techniques were principal component analysis and cluster analysis. The review also identified several determining and correlating factors in heavy metal distribution in soils, including soil type, soil pH, soil organic matter, land use type, Fe, Al, and heavy metal concentrations. The major natural and anthropogenic sources of heavy metals were found to derive from lithogenic origin, roadway and transportation, atmospheric deposition, wastewater and runoff from industrial and mining facilities, fertilizer application, livestock manure, and sewage sludge. This review argues that the full potential of integrated GIS and multivariate statistical analysis for assessing heavy metal distribution in soils on a regional scale has not yet been fully realized. It is proposed that future research be conducted to map multivariate results in GIS to pinpoint specific anthropogenic sources, to analyze temporal trends in addition to spatial patterns, to optimize modeling parameters, and to expand the use of different multivariate analysis tools beyond principal component analysis (PCA) and cluster analysis (CA).
Показать больше [+] Меньше [-]Urban edge trees: Urban form and meteorology drive elemental carbon deposition to canopies and soils
2022
Ponette-González, Alexandra G. | Chen, Dongmei | Elderbrock, Evan | Rindy, Jenna E. | Barrett, Tate E. | Luce, Brett W. | Lee, Jun-Hak | Ko, Yekang | Weathers, Kathleen C.
Urban tree canopies are a significant sink for atmospheric elemental carbon (EC)––an air pollutant that is a powerful climate-forcing agent and threat to human health. Understanding what controls EC deposition to urban trees is therefore important for evaluating the potential role of vegetation in air pollution mitigation strategies. We estimated wet, dry, and throughfall EC deposition for oak trees at 53 sites in Denton, TX. Spatial data and airborne discrete-return LiDAR were used to compute predictors of EC deposition, including urban form characteristics, and meteorologic and topographic factors. Dry and throughfall EC deposition varied 14-fold across this urban ecosystem and exhibited significant variability from spring to fall. Generalized additive modeling and multiple linear regression analyses showed that urban form strongly influenced tree-scale variability in dry EC deposition: traffic count as well as road length and building height within 100–150 m of trees were positively related to leaf-scale dry deposition. Rainfall amount and extreme wind-driven rain from the direction of major pollution sources were significant drivers of throughfall EC. Our findings indicate that complex configurations of roads, buildings, and vegetation produce “urban edge trees” that contribute to heterogeneous EC deposition patterns across urban systems, with implications for greenspace planning.
Показать больше [+] Меньше [-]Combining Himawari-8 AOD and deep forest model to obtain city-level distribution of PM2.5 in China
2022
Song, Zhihao | Chen, Bin | Huang, Jianping
PM₂.₅ (fine particulate matter with aerodynamics diameter <2.5 μm) is the most important component of air pollutants, and has a significant impact on the atmospheric environment and human health. Using satellite remote sensing aerosol optical depth (AOD) to explore the hourly ground PM₂.₅ distribution is very helpful for PM₂.₅ pollution control. In this study, Himawari-8 AOD, meteorological factors, geographic information, and a new deep forest model were used to construct an AOD-PM₂.₅ estimation model in China. Hourly cross-validation results indicated that estimated PM₂.₅ values were consistent with the site observation values, with an R² range of 0.82–0.91 and root mean square error (RMSE) of 8.79–14.72 μg/m³, among which the model performance reached the optimum value between 13:00 and 15:00 Beijing time (R² > 0.9). Analysis of the correlation coefficient between important features and PM₂.₅ showed that the model performance was related to AOD and affected by meteorological factors, particularly the boundary layer height. Deep forest can detect diurnal variations in pollutant concentrations, which were higher in the morning, peaked at 10:00–11:00, and then began to decline. High-resolution PM₂.₅ concentrations derived from the deep forest model revealed that some cities in China are seriously polluted, such as Xi ‘an, Wuhan, and Chengdu. Our model can also capture the direction of PM₂.₅, which conforms to the wind field. The results indicated that due to the combined effect of wind and mountains, some areas in China experience PM₂.₅ pollution accumulation during spring and winter. We need to be vigilant because these areas with high PM₂.₅ concentrations typically occur near cities.
Показать больше [+] Меньше [-]Vulnerability mapping and risk analysis of sand and dust storms in Ahvaz, IRAN
2021
Boloorani, Ali Darvishi | Shorabeh, Saman Nadizadeh | Neysani Samany, Najmeh | Mousivand, Alijafar | Kazemi, Yasin | Jaafarzadeh, Nemat | Zahedi, Amir | Rabiei, Javad
In this work, a sand and dust storm vulnerability mapping (SDS-VM) approach is developed to model the vulnerability of urban blocks to SDS using GIS spatial analysis and a range of geographical data. The SDS-VM was carried out in Ahvaz, IRAN, representing one of the most dust-polluted cities in West Asia. Here, vulnerability is defined as a function of three components: exposure, sensitivity, and adaptive capacity of the people in the city blocks to sand and dust storms. These components were formulated into measurable indicators (i.e. GIS layers) including: PM₂.₅, wind speed, distance from dust emission sources, demographic statistics (age, gender, family size, education level), number of building floors, building age, land surface temperature (LST), land use, percentage of literate population, distance from health services, distance from city facilities (city center, shopping centers), distance from infrastructure (public transportation, main roads and highways), distance from parks and green spaces, and green area per capita. The components and the indicators were weighted using analytical hierarchy process (AHP). Different levels of risks for the components and the indicators were defined using ordered weighted averaging (OWA). Urban SDS vulnerability maps at different risk levels were generated through spatial multi-criteria data analysis procedure. Vulnerability maps, with different risk levels, were validated against field-collected data of 781 patients hospitalized for dust-related diseases (i.e. respiratory, cardiovascular, and skin). Results showed that (i) SDS vulnerability map, obtained from the developed methodology, gives an overall accuracy of 79%; (ii); regions 1 and 5 of Ahvaz are recognized with the highest and lowest vulnerabilities to SDS, respectively; and (iii) ORness equal to 0 (very low risk) is the optimum SDS-VM risk level for decision-making to mitigate the harmful impacts of SDS in the deposition areas of Ahvaz city.
Показать больше [+] Меньше [-]